human care Carl-Oskar RA Instructions for use

1
To secure that the walking-aid will function safely for the user, once per
year review of the walking-aid should be done.Therefore is the following
interventions recommended.
Wing nut
Control function.
Reectors
Make sure the reectors are still
there and visible.
CE-marking
Make sure that the CE-marking
is still there and readable.
Wheels
Make sure the wheels are not
worn-out and are spinning easily
without any noice.
Lubrication
Gatebushings and hinges should be
working without any noice. Lubricate when needed.
Front forks
Make sure that the ball bearing is rmly attached and that the forks swings easily.
The front fork inertia can be adjusted by adjusting the nut on the top under the
hub cover. Note! The nut on the inside of the fork must not be touched.
Folding mechanism
Should be intact and the locking should function.
Seat
Make sure the seat is kept in place and
screws are tightened.
Stability
Control that all wheels are steadily on the ground and that there are no chassis
distortion.
Test driving
Make a nal control by test driving.
Cleaning
When cleaning the walker it is recommended machine washing, 60 degrees for
10 minutes.When using a pressure washer, do not wash directly to the bearings.
In addition to machine washing, regular cleaning with a mild cleanser is
recommended. Note! Do NOT use thinner, petrol or other solvents.
Post treatment
After washing, all connections, tight spaces and drainage holes should be blown
dry and sprayed with thin oil. If degreaser is used, should the moving parts be
lubricated.
The Paint
Control damages to the paint.To prevent corrosion, improve scratches.Touch-up
paint can be ordered from Human Care HC AB.
Pipe frame
Control weldings and screw attaches. If the corrosion is extensive shall the
rollator be replaced.
Handle
Must be xed. Make sure the handle pipes can be pushed
down to the chassis. Change the grip if needed.
Brakes
Control that both brakes and parkingbrakes are working.
Wires should be intact and stapped to the chassis.
RECONDITIONING MANUAL
Carl-Oskar RA&TW

2
Spareparts list
Note!
Recondition must be done by a person how has good knowledge about how the
job should be performed.An incorrect performed recondition could result an
accident/incident. Don´t hesitate to contact your retailer if questions come up.
When exchanging parts of the rollator, use only Human Care parts to ensure
continued CE-validation.
When disassembling of a wheel, the wheel nut and pin bolt must be replaced
since they contain a self-locking that will be destroyed when disassembling.
If the corrosion is more than a lm of rust the rollator shall be discarded and
return for recycling.
Intended use
The RA-rollator/trolley walker should only be used as support whilst walking.
Do not alter the RA-rollator/trolley walker yourself.
RECONDITIONING MANUAL
Product number:
Owner:
Notes:
Attended by:
Place and date:
No Designation Quantity Art. no Other information
Wheel kit 4 89010 Bolt and nut must be exchanged
1
2
3
Complete wheel
Wheel nut
Pin bolt
4
4
4
when disassembling the wheel.
Pin bolt & wheel nut 4 89032 Pin bolt and wheel nut must be
2
3
Wheel nut
Pin bolt
4
4
exchanged when disassembling.
Front fork kit 2 89085 From 200507
2
3
4
Front fork
Wheel nut
Pin bolt
Bearing
Locking nut
Hub cover
2
2
2
4
2
2
Pin bolt and wheel nut must be
exchanged when disassembling the
fork.
4 Hub cover 2 00864
Brake kit 2 89095 Pin bolt and wheel nut must be
5
6
7
8
9
10
11
12
13
Brake inner part
Brake outer part
Pop nut
Wear washer
Screw M6x6
Washer
Adjustment screw
Spring
Screw M6x16
2
2
2
2
2
2
2
2
2
exchanged when disassembling the
brake.
2 Wheel nut 2
3 Pin bolt 2
8 Wear washer 2 10-004 Wear washer turns when worn.
14 Handle brake complete 2 10650
15 Handle 2 00020
16
17
18
RA
RA-Cushion
RA-Bracket compl right
RA-Bracket compl left
2
1
1
20-054
100-002H
100-002V
19
20
21
22
TW
Walking table cushion
Cushion screw
Bracket compl right
Bracket compl left
1
4
1
1
20-053
00818
100-001H
100-001V
23 Teleskopic tube 2 20-010K C-O 67 RA/TW Low
23 Teleskopic tube 2 20-010L C-O 67 RA/TW Normal
23 Teleskopic tube 2 20-011K C-O 72 RA/TW Low
23 Teleskopic tube 2 20-011L C-O 72 RA/TW Normal

99213-Rev C, (2013-11-20)
3
5
11 13
10 9
7
6
8
12
1
3
2
14
16
15
19
22
21
20
24
26
25
27
32
29
30
31
28
23
33
23
4
17,18
RECONDITIONING MANUAL
• Årstaängsvägen 21C, SE-117 43 Stockholm, Sweden •
• Tel. +46(0)8 - 510 132 00 • Fax +46(0)8 - 665 35 10 •
• www.humancaregroup.com •
No Designation Quantity Art. no Other information
Wing nut complete 2 50937 Lubricate the wing nut when needed.
24
25
26
Wing nut
Screw
Washer
2
2
2
27 Wire housing 2 00011 C-O 67/72 RA/TW Low
27 Wire housing 2 00012 C-O 67/72 RA/TW Normal
27 Wire 2 00005 C-O 67/72 RA/TW Low/Normal
Wire lock 2 10-017
Wire end 2 00205
Seat kit 1 89020
28
29
30
31
32
Seat
Gate lock
Fold loop
Screw M6x20
Screw to gate lock
1
1
1
2
4
Seat complete 1 89070
28
31
Seat
Screw M6x20
1
2
Tube protection 1 50949
30 Fold loop 1 10-009
Gate lock kit 1 10-018
29
32
30
Gate lock
Screw to gate lock
Fold loop
1
4
1
33 Gate upper complete 1 20-047MB C-O RA/TW 67
33 Gate upper complete 1 20-047B C-O RA/TW 72
33 Gate upper complete -seat 1 20-037MB C-O RA/TW 67
33 Gate upper complete -seat 1 20-037B C-O RA/TW 72
Reex 2 00028
Touch-up paint F2