human care 90222 User manual

User manual Crossover
90222
Rollator

1
Please read this user manual before assembling and
using this rollator.
Instruction for use of the rollator
Parts Lists:
The rollator includes:
1) Height Adjustment Handle 2) Brake Lever 3) Red Pull Strap (Seat)
4) Red Height Adjustment Button 5) Wheels 6) Soft Bag 7) Backstrap

2
This rollator offers a sturdy seat for the user.
The rollator can be folded, making it easier for carrying or storage.
1. Folding and Unfolding the Rollator
To fold the rollator, grip the red pull strap that is attached to the seat, and pull towards you
and upwards.
To unfold / open the rollator, push the handles apart and press down firmly on the seat
platform until it is flat and locked.
2. Using the Brakes
The rollator is equipped with both a walking brake and a parking brake.
Walking Brake
To slow down the pace or to come to a stop, use the walking brake.

3
Squeeze the brake levers up to the handles to stop. The wheels will move freely once you
release the brake levers.
Parking Brake (Engage/Disengage)
To secure the rollator from rolling away or to sit down on the seat, push the brake lever down
until they lock and with an audible “click” sound. Pull up on the brake lever to unlock the
parking brake.
While you are sitting on the rollator, always ensure the parking brake is engaged.
3. Handle Height Adjustment
To adjust the handles, press the red button firmly, to disengage the lock. The handle height
can be adjusted in 1” increments. While pressing the red button, pull the handle upwards
or press downwards to the next height adjustment. As you are pulling up or pushing down
the handle, release the red button, and it will lock, with an audible “click”, when it reaches
the next height increment. Repeat this step until you reach your optimal hand position when
using the rollator. Ensure both handles are set to the same height.

4
4. Backstrap Installation
Insert the backstrap end onto rollator handle mount. To remove, slide the backstrap up and
out of the handle mount.
By tightening the screws, the backstrap can be fastened permanently. Now the backstrap is
fixed and cannot be easily removed.
5. Soft Bag Installation
Hang the straps of the bag over the mounted rods on the side of the seat.

5
Accessories:

6
Specifications
Care and Maintenance:
1. Occasionally wipe the rollator with a soft cloth, do not use harsh abrasive chemicals.
2. Do not store the rollator in damp environments.
3. During assembly of the rollator, pay attention to possible pinch points to avoid injury.
4. While adjusting the handle height, do not grip the adjusting tube.
5. Regularly check to ensure brake operation is normal.
6. Periodically check that all the screws, nuts, and bolts are securely tightened.
7. Do not hang anything on the handles or backstrap.
8. Make sure the brakes are engaged and locked while seated.
9. Use only authorized parts for repair of this product.
10. Never use this rollator for any other reason than its intended purpose.
Crossover / 90222
1 Overall Length 73 cm
2 Overall Width 66 cm
3 Handle Height min 86 cm
4 Handle Height Max 98.5 cm
5 Seat height 53cm/21in cm/in
6 Seat size 45x20 cm
7 Fold width 24 cm
8 Width between handles 48 cm
9 Front wheel 20cm/8in cm/in
10 Rear wheel 20cm/8in cm/in
11 Net weight 8 kgs
12 Carton size 74 x 25 x 88 cm
13 Max user weight 136 kgs/300lbs kgs/lbs
14 Bag loading 5 kgs

7
Distributed by :
Manufacturer:
Ralon Medical Equipment CO., Ltd.
Add: XiLian Development Zone, Danzao, Nanhai, Foshan, Guangdong, China.
Distributed by:
Human Care Canada
Phone: - 613.723.6734
Email: [e-mail]
99999, Rev 02, User manual Crossover, Oct 2021