human care Fellow Classic Instructions for use

1
Fellow Classic
To secure that the walking-aid will function safely for the user, once per
year review of the walking-aid should be done.Therefore is the following
interventions recommended.
CE-marking
Make sure that the CE-marking is still there and readable.
Wing nut
Control function.
Reectors
Make sure the reectors are there and visible.
Hub caps
Make sure that they are not missing
Wheels
Make sure the wheels are not worn-out
and are spinning easily without any noice.
Fork hub och locking washer
Make sure that the fork hub and locking washer are attached. Note! The locking
washer must be replaced when disassembling (for rollators with older front fork
design).
Front forks
Control that attachments and bearings does not t loosely and spins easily.
Seat
Make sure that the seat is kept in place and the nuts are tightened.
Folding mechanism
Should be intact and the locking should function.
Safety catch
Check that the safety catch falls of its own weight.
Stability
Control that all wheels are steadily on the ground and that there are no chassis
distortion.
Test driving
Make a nal control by test driving.
Cleaning
When cleaning the walker it is recommended machine washing, 60 degrees for
10 minutes.When using a pressure washer, do not wash directly to the bearings.
In addition to machine washing, regular cleaning with a mild cleanser is
recommended. Note! Do NOT use thinner, petrol or other solvents.
Post treatment
After washing, all connections, tight spaces and drainage holes should be blown
dry and sprayed with thin oil. If degreaser is used, should the moving parts be
lubricated.
The Paint
Control damages to the paint.To prevent corrosion, improve scratches.Touch-up
paint can be ordered from Human Care HC AB.
Pipe frame
Control weldings and screw attaches. If the corrosion is extensive shall the
rollator be replaced.
Handle
Must be xed. Make sure the handle pipes can be pushed
down to the chassis. Change the grip if needed.
Brakes
Control that both brakes and parkingbrakes are working.
Wires should be intact and stapped to the chassis.
RECONDITIONING MANUAL

2
Spareparts list
Product number:
Owner:
Notes:
Attended by:
Place and date:
Note!
Recondition must be done by a person how has good knowledge about how the
job should be performed.An incorrect performed recondition could result an
accident/incident. Don´t hesitate to contact your retailer if questions come up.
When exchanging parts of the rollator, use only Human Care parts to ensure
continued CE-validation.
When disassembling of a wheel, the wheel nut must be replaced since it contain
a self-locking that will be destroyed when disassembling.
If the corrosion is more than a lm of rust the rollator shall be discarded and
return for recycling.
Intended use
The rollator should only be used as support whilst walking or as seating whilst
stationary. Do not alter the rollator yourself.
RECONDITIONING MANUAL
No Designation Quantity Art. no Other information
1
2
3
4
5
6
7
8
9
10
11
Front fork and wheel
Fork hub
Locking washer
Washer
Wave washer
Nylon washer
Nylon washer
Slide bearing with ange
Front fork
Wheel complete
Flange nut
Hub
2
2
2
6
4
4
12
1+1
4
2
2
93015075
93013012
00856
93012008
93015026
93015025
930130013
200.1010
93017025
93011008
93017024
Until 201209
Must be replaced when disassembling.
t=0,8mm
t=2mm
Need no lubrication.
State right or left.
Complete with slide bearing.
Must be replaced when disassembling.
12
13
3
4
5
6
7
14
15
9
10
11
Front fork and wheel
Fork hub
Locking nut
Washer
Wave washer
Nylon washer
Nylon washer
Slide bearing with ange
Front fork right
Front fork left
Wheel complete
Flange nut
Hub
2
2
2
6
4
4
12
1
1
4
2
2
89305
00888
00856
93012008
93015026
93015025
930130013
89310
89300
93017025
93011008
93017024
From 201210
t=0,8mm
t=2mm
Need no lubrication.
Complete with slide bearing.
Must be replaced when disassembling.
16
17
18
19
10
Brake
Wire complete
Brake spring
Brake gear
Nut cover
Flange nut
2
2
2
4
6
00891
AL-10142
AL-10139
200.1005
93011008
Complete with adjustment casing.
Must be replaced when disassembling.
20
Handle
Complete handle brake, (handle, brake, screws, wire, housing, spring, handle pipes included).
Right side
Left side
Right side
Left side
00902
00903
00904
00905
Standard, narrow, wide and high
Standard, narrow, wide and high
Fellow low
Fellow low
21
22
23
Wing nut
Screw
Washer
Wing nut
2
2
2
00071
000124
20-052 Lubricate when needed.

3
18
19
10
16
20
21
22
23
17
24,25
26
27
12
13
3
4
5
6
7
714,15
9
10
67
7
5
4
11
1
2
3
4
5
7
6
78
99210-Rev G, (2013-04-12)
RECONDITIONING MANUAL
• Årstaängsvägen 21C, SE-117 43 Stockholm, Sweden •
• Tel. +46(0)8 - 510 132 00 • Fax +46(0)8 - 655 35 10 •
• www.humancaregroup.com •
24
25
Seat
Seat
Steel screw
1
5
93015086
93010007 Make sure that the screws are
tightened.
26 Locking frame complete 1 200.2100 Complete with safety catch.
27 Reex 3 00028
Touch-up paint F4
From 201210
Until 201209