hygena Alto 414/3475 Datasheet

Assembly lnstructions - Please keep for future reference
Alto Lamp Table
Width - 46cm
Depth - 38cm
Height -70cm
Dimensions
If you need help or have damaged or missing parts, call the Customer Helpline: 0345 6400 800
Important - Please read these instructions fully before starting assembly
Issue 1-20-05-15
414/3475
hygena

Safety and Care Advice
Check you have all the
components and tools listed on
pages 2 and 3.
Remove all fittings from the
plastic bags and separate them
into their groups.
Keep children and animals
away from the work area, small
parts could choke if swallowed.
Make sure you have enough
space to layout the parts before
starting.
Assemble the item as close
to its final position (in the same
room) as possible.
Assemble on a soft level
surface to avoid damaging the
unit or your floor.
Assembly requires 2 people.
Do not stand or put excessive
weight on the product,this could
cause damage.
We do not
recommend the
use of power
drill/drivers for
inserting screws,
as this could damage the unit.
Only use hand screwdrivers and
Allen keys.
Dispose of all packaging
carefully and responsibly.
1
Only clean using a damp cloth
and mild detergent, do no use
bleach or abrasive cleaners.
From time to time check that
there are no loose screws on
this unit.
This product should not be
discarded with household
waste. Take to your local
authority waste disposal centre.

Components - Parts lf you have damaged or missing components.
call the Customer Helpline: 0345 6400 800
2
6
5Leg x 4
(4.5/3x3cm)
4
12
Base panel
(46x38x1.5cm)
Side panel (left)
(37x37x1.5cm)
3
Side panel (right)
(37x37x1.5cm)
Back panel
(43.7x37.7x0.3cm)
Top panel
(46x38x1.5cm)
7Drawer back panel x 2
(37.9x14x1.2cm)
8Drawer side panel (right) x 2
(30x14x1.2cm)
10
9
(30x14x1.2cm)
Drawer base panel x 2
(38.6x29.5x0.3cm)
11
(42.3x18x1.2cm)
Drawer side panel (left)x 2
Drawer front x 2
inside
underside
inside underside
underside

3
0345 6400 800
B C
D
G
E F
A
F
Ruler - Use this ruler to help correctly identify the screws
0 5 10 15 20 25 30 35 40 45 50 55 60 65 70 75 80 85 90 95 100 105 110 115 120 125 130 135 140 145 150 155 160 165 170
Tools required
0
0 5 10 15 20 25 30 35 40 45 50 55 60 65 70 75 80 85 90 95 100 105 110 115 120 125 130 135 140 145 150
1 2 3 4 5 6 Ruler/tape measure
Components - Fittings
Metal dowel x 16 Small locking nut x 8
Wooden dowel x 8 (6X30mm)
Phillips screwdriver
(Not supplied)
Drawer runner x 2sets (L300mm)
Wood screw x 8 (4x30mm)
Screw x 16 (3x12mm)
Screw x 20 (3x12mm)
H
Large locking nut x 8
J
Metal bracket x 4
K
Screw x 12 (2.2x10mm)

4
Assembly Instructions
1
4
4
2
3
BD
BB
BD
X2
11
B
B
B
BA
Preparing panels
Place top panel , base
panel , and drawer fronts
flat onto the floor with the
fixing holes facing up.
Screw metal dowels into
each panel as shown.
Screw metal dowels as far
as shown. Do not overtighten.
Assembling side panels
Insert wood dowels into
base panel as shown.
Carefully locate side panels
and onto base panel
.
Note: Ensure the cut out
edges on side panels
and and base panel
are correctly located at the
back.
Insert large locking nuts
into side panels and .
Turn locking nuts clockwise
to secure.
BA
Back
Front
cut out edges at back
1
4
11
B
BA
4
2 3
4
2
3 4
23
BD

5
Assembly Instructions
2
3
BF
2
3
BD 1
BA
BD
BE
BE
Assembling top panel
With help, carefully locate top
panel into position as
shown.
Note: Ensure the cut out edge
on the top panel is
correctly located at the back.
Insert large locking nuts
into side panels and .
Turn locking nuts clockwise
to secure.
Assembling drawer runners
3
2
BE
BF
BF
BF
BE
BF
BE BE
Insert wood dowels into
the top edges of side panels
and .
BA
2 3
Attach one half of drawer
runners onto side panels
, as shown. Secure
with screws .
BF
23
BE
1
1
BD
2 3
Note: the correct fixing hole
positions are shown on the
drawings.

6
Assembly Instructions
4
BH
6
BK
BJ
Assembling back panel
With help, carefully turn the
unit onto it’s front.
Place back panel into the
recess around the back of the
unit. Secure using screws .
Preparing base
Secure metal brackets to
base panel using screws
.
Base
Note: Ensure the unit is
straight and square before
securing back panel .
6
BK
BJ
BH
4
6

Assembly Instructions
7
8
5
5
5
5
X2
9
8
11
10
7
8
9
BC
BG
BE
BF
Attaching legs
Screw legs onto metal
bracket until they are
secure.
Assembling drawers
a: Locate drawer side panels
and onto drawer front
panel .
Note: Ensure all grooves are
correctly located at the bottom.
Insert small locking nuts
into drawer side panels
and . Turn locking nuts
clockwise to secure.
b: Slide drawer base panel
into the groove.
c: Locate drawer back panel
in between drawer side
panels and . Secure
using screws .
d: Locate drawer runners
onto each side of the drawer
body. Secure using screws .
Repeat for both drawers.
a: b:
c:
d:
Do not overtighten.
BE
BE
8
BF
BJ
5
89
11
8
9
BC
10
8 9
7
BG
BF
BE

Assembly Instructions
8
If you need help or have damaged or missing parts, call the Customer Helpline: 0345 6400 800
Home Retail Group. 489-499 Avebury Boulevard. Saxon Gate West. Central Milton Keynes. MK9 2NW
9
Locating drawers
With help, turn the whole unit
upright.
Carefully slide drawers into
position as shown.