hygena 541/0530 User manual

Cortez Desk
Dimensions
Width - 120cm
Depth - 60cm
Height - 75cm
Important– Please read these instructions fully before starting assembly
If you need help or have damaged or missing parts, call the Customer Helpline: 03456 400800
Assembly Instructions- please keep for future reference541/0530
Issue 1 - 04/11/16

Safety and Care Advice
Important – Please read these instructions fully before starting assembly
Care and maintenance
• Check you have all the
components and tools listed on
the following pages.
plastic bags and separate them
into their groups.
• Keep children and animals
away from the work area, small
parts could choke if swallowed.
• Make sure you have enough
space to layout the parts before
starting.
• During assembly do not stand
or put weight on the product,
this could cause damage.
• Assemble the item as close
room) as possible.
• Assemble on a soft level
surface to avoid damaging the
• Parts of the assembly will be
easier with 2 people.
• To reduce the
likelihood of damaging
your product please
ensure that your
power drill is set on a low torque
setting.
• Only clean using a damp
cloth and mild detergent, do
not use bleach or abrasive
cleaners.
• From time to time check that
there are no loose screws on
this unit.
• This product should not be
discarded with household
waste. Take to your local
authority waste disposal
centre.
Handy Hints
• Assemble all parts and bolts
loosely during assembly.only
once the product is complete
should you fully tighten the bolts.
• Regularly check and ensure
that all bolts and fittings are
tightend properly.
Glass Safety
Glass Safety
• Keep these instrudion for future reference
• imported by:
Argos Ltd
489-499 Avebury Boulevard.
Saxon Gate West.
Central Milton Keynes
MK9 2t4W
• If the glass is chipped or broken: stop using the product and
consult the Manufacturer or Supplier
• Batch No:368403
• Date of Manufacture: Apr. 2016
• Type of glass used: 8mm toughened glass
1
Warning:
(a) Do not place very hot or very cold items on the glass surface(s) unless adequately thick table mats
are used to prevent such items from coming into contact with the glass.
(b) Do not sit or stand upon the glass surface(s).
(c) Do not use the glass as a chopping surface. Do not strike the glass with hard or pointed items.
(d) When cleaning glass panels use a damp cloth or leather with washing up liquid or soft soap if
necessary, do not use washing powders or any other substance containing abrasives since these
substances scratch glass.

Components - Panels
Please check you have all the panels listed below
1Glass Desktop x 1
(120(h)cm x 60(d)cm)
2Right side frame x 1
(72.5(h)cm x 59.5(d)cm)
3Left side frame x 1
(72.5(h)cm x 59.5(d)cm)
4Support bar x 2
(1.3/3.8(w)cm x 111.6(h)cm)
5Base x 1
(21.9(w)cm x 26.6(d)cm)
6Shelf x 2
(21.8(w)cm x 26(d)cm)
7Back x 1
(82(h)cm x 23.9(w)cm)
8Bottom rail x 1
(3(h)cm x 21.9(w)cm)
2
If you have damaged or missing components,
call the Customer Helpline: 03456 400800

Components - Fittings
Note:
may be supplied than are required.
ABCD
Plastic plugs x 8 23mm Bolt x 4 13mm Bolt x 8 Adjustable feet x 4
EFG H
Allen Key x 1 15mm Screw x 12 19mm Screw x 2 Rawl plug x 1
I J K
10mm Screw x 11 Handle x 1 120mm Wall strap x 1
Ruler – Use this ruler to help correctly identify the screws
0 5 10 15 20 25 30 35 40 45 50 55 60 65 70 75 80 85 90 95 100 110 115 120 125 130 135 140 145 150 155 160 165 170
105
3
If you have damaged or missing components,
call the Customer Helpline: 03456 400800
The screws length is measured from the head to the point(30mm screw shown).

4
A
AA
A
A
A
2
3
4
4
3
C
C
C
Assembly Instructions
Step 1
Step 2
Fitting Plastic Plug
Insert plastic plug A
into right side frame 2
and left side frame 3 .
Fitting Support bar
Attach left side frame 3
and support bar 4 using
bolts C .
Please do not fully tighten
the bolts at this stage.

5
2
3
1
B
B
B
B
D
D
D
D
C
C
Assembly Instructions
Step 3
Fitting Right Side Frame
Attach right side frame 2
and support bar 4 using
bolts C .
Please do not fully tighten
the bolts at this stage.
Step 4
Glass top should be placed
upside down on a protective
surface
Fitting Glass desktop
Attach glass desktop 1
and side part frames 2 3
using bolts B .
Screw adjustment feet D
into bottom of side part
frames 2 3 .
Fully tighten all bolts
assembled in previous
steps.