Hytera PD3 Series Installation and operation manual

PD3 Series Commercial Radio
Upgrade Guide

Copyright Information
Hytera is the trademark or registered trademark of Hytera Communications Corporation Limited (the
Company) in PRC and/or other countries or areas. The Company retains the ownership of its trademarks
and product names. All other trademarks and/or product names that may be used in this manual are
properties of their respective owners.
The product described in this manual may include the Company’s computer programs stored in memory
or other media. Laws in PRC and/or other countries or areas protect the exclusive rights of the Company
with respect to its computer programs. The purchase of this product shall not be deemed to grant, either
directly or by implication, any rights to the purchaser regarding the Company’s computer programs. Any
of the Company’s computer programs may not be copied, modified, distributed, decompiled, or
reverse-engineered in any manner without the prior written consent of the Company.
Disclaimer
Hytera Communications Corporation Limited (the Company) endeavors to achieve the accuracy and
completeness of this manual, but no warranty of accuracy or reliability is given. All the specifications and
designs are subject to change without notice due to continuous technology development. No part of this
manual may be copied, modified, translated, or distributed in any manner without the express written
permission of us.
We do not guarantee, for any particular purpose, the accuracy, validity, timeliness, legitimacy or
completeness of the Third Party products and contents involved in this manual.
If you have any suggestions or would like to learn more details, please visit our website at:
http://www.hytera.com.

Upgrade Guide
Contents
i
Contents
Documentation Information...................................................................................................................1
1. Overview .............................................................................................................................................3
1.1 Upgrade Instructions.......................................................................................................................3
1.2 Confirming the Firmware Version....................................................................................................3
1.3 Applicable Models and Versions .....................................................................................................3
2. PD35X/PD36X Upgrade Guide .........................................................................................................10
2.1 Upgrade Procedure.......................................................................................................................10
2.1.1 Starting Upgrade.................................................................................................................10
2.1.2 After-upgrade Check...........................................................................................................10
2.1.3 Upgrade Failure ..................................................................................................................11

Upgrade Guide
Documentation Information
1
Documentation Information
This section describes the conventions and revision history of this document.
Conventions
Icon Conventions
Icon Description
Tip Indicates information that can help you make better use of your product.
Note Indicates references that can further describe the related topics.
Caution Indicates situations that could cause data loss or equipment damage.
Warning Indicates situations that could cause minor personal injury.
Danger Indicates situations that could cause major personal injury or even death.
Notation Conventions
Notation Description
“ ”
The quotation marks enclose the name of a software interface element. For
example, click “OK”.
Bold
The text in boldface denotes the name of a hardware button. For example, press the
PTT key.
->
The symbol directs you to access a multi-level menu. For example, to select “New”
from the “File” menu, we will describe it as follows: “File -> New”.
Revision History
Version Release Date Description
R2.05.05 2017-04
Product versions are upgraded to the latest version:
Radio: V2.05.05.001; RCDB: D2.05.01.002; Baseband: V2_01_05PD
R2.03.01 2016-12
Product versions are upgraded to the latest version:
Radio: V2.03.01.001; RCDB: D2.03.01.001; Baseband: V2_01_05PD

Documentation Information
Upgrade Guide
2
Version Release Date Description
R2.02.11 2016-10
Product versions are upgraded to the latest version:
Radio: V2.02.11.001; RCDB: D2.02.01.002; Baseband: V2_01_05PD
R1.4.14 2016-03
Product versions are upgraded to the latest version:
Radio: A1.04.14.001; RCDB: D1.04.02.006; Baseband: No Upgrade
R1.4.2 2015-12
Product versions are upgraded to the latest version:
Radio: A1.04.12.001; RCDB: D1.04.02.003; Baseband: No Upgrade
R1.4.1 10-2015
Product versions are upgraded to the latest version:
Radio: A1.04.10.001; RCDB: D1.04.02.003; Baseband: No Upgrade
R1.4 06-2015
Product versions are upgraded to the latest version:
Radio: A1.04.07.001; RCDB: D1.04.02.002; Baseband: No Upgrade
R1.2 12-2014
Product versions are upgraded to the latest version:
Radio: A1.02.09.001; RCDB: D1.02.05.001; Baseband: V2.01.03P8
R1.1 07-2014
This document is used to instruct the customers to upgrade the PD3
series radio software to the latest version A1.01.02.023.

Upgrade Guide
Overview
3
1. Overview
1.1 Upgrade Instructions
To ensure successful upgrade, please read the following instructions carefully before upgrading:
This document is only used to instruct customers to upgrade the software of specific radio to
R2.05.05Please refer to 1.3 Applicable Models and Versions for more details.
Make sure that USB to Uart driver is installed on the computer; if not, please install the driver before
upgrading.
After successful upgrade, use V2.05.02.001or later CPS to reprogram the radio.
To ensure successful upgrade, do not run other applications of the Company during upgrade. If the
upgrade process is interrupted by running other applications, please restart the radio and try again.
Do not disconnect the power supply of the radio during upgrade. If the power supply is cut off or
upgrade failure occurs, please restart the radio and try again.
If the prompt “Reading data error!” or “Writing data error!” appears during upgrade, please restart the
radio and try again.
1.2 Confirming the Firmware Version
Caution
Please confirm the following conditions before upgrading. If the conditions are not satisfies, stop
upgrading the radio; otherwise, the radio may be damaged.
Firmware version of the radio to be upgraded must comply with the upgrade requirements.
Firmware version of the radio must be upgraded to later version.
Step 1 Use the CPS of earlier version to read the radio to be upgraded.
Step 2 Click “Radio Information” to check whether the Firmware Version and Model Number comply
with the requirements in 1.3 Applicable Models and Versions.
Step 3 Disconnect the CPS and the radio.
Step 4 Turn off the radio.
1.3 Applicable Models and Versions
R5.6 Version and Model Number

Overview
Upgrade Guide
4
Firmware Version Model Number
A1.01.02.020
A1.01.02.023
A1.01.02.024
A1.01.02.025
These firmware versions are corresponding to firmware with the
old SCT3928DD_UpdateFlash version. After the firmware is
upgraded, the related functions cannot be improved or added.
Such issues include:
TDMA feature is not supported
Mixed Receiving feature is not supported
CTCSS unexpected enabling/Tail tone issue is not solved
Noise issue upon releasing the PTT key is not solved
Referred Configuration List:
PD350-00000000-N00000-Ua-0-D
PD350-00000000-N00000-Uc-0-D
PD355-00000000-N00000-B1-0-D
PD360-00000000-N00000-Ua-0-D
PD360-00000000-N00000-Uc-0-D
PD365-00000000-N00000-B1-0-D
A1.02.09.001
A1.02.10.001
These firmware versions are corresponding to firmware of
V2_01_03P8 version. After the firmware is upgraded, the related
functions cannot be improved or added. Such issues include:
Mixed Receiving feature is not supported
CTCSS unexpected enabling/Tail tone issue is not solved
Referred Configuration List:
PD350-00000000-N00000-Ua-0-D
PD350-00000000-N00000-Ua-0-F
PD350-00000000-N00000-Uc-0-D
PD350-00000000-N00000-Uc-0-F
PD355-00000000-N00000-B1-0-D
PD355-00000000-N00000-B1-0-F
PD360-00000000-N00000-Ua-0-D
PD360-00000000-N00000-Ua-0-F
PD360-00000000-N00000-Uc-0-D
PD360-00000000-N00000-Uc-0-F
PD365-00000000-N00000-B1-0-D
PD365-00000000-N00000-B1-0-F
A1.03.04.001
A1.03.06.001
A1.03.07.001
These firmware versions are corresponding to firmware of
Referred Configuration List:
PD350-00000000-N00000-Ua-0-D
PD350-00000000-N00000-Ua-0-F
PD350-00000000-N00000-Uc-0-D

Upgrade Guide
Overview
5
Firmware Version Model Number
V2_01_03P8 version. After the firmware is upgraded, the related
functions cannot be improved or added. Such issues include:
Mixed Receiving feature is not supported
CTCSS unexpected enabling/Tail tone issue is not solved
PD350-00000000-N00000-Uc-0-F
PD355-00000000-N00000-B1-0-D
PD355-00000000-N00000-B1-0-F
PD360-00000000-N00000-Ua-0-D
PD360-00000000-N00000-Ua-0-F
PD360-00000000-N00000-Uc-0-D
PD360-00000000-N00000-Uc-0-F
PD365-00000000-N00000-B1-0-D
PD365-00000000-N00000-B1-0-F
PD370-00000000-N02000-Ub-0-F
PD370-00000000-N02000-Uf-0-F
A1.04.04.001
A1.04.05.001
These firmware versions are corresponding to firmware of
V2_01_03N3 version, which is the same as the firmware version
of the upgrade package. You can upgrade the firmware directly.
Referred Configuration List:
PD350-00000000-N00000-Ua-0-D
PD350-00000000-N00000-Ua-0-F
PD350-00000000-N00000-Uc-0-D
PD350-00000000-N00000-Uc-0-F
PD355-00000000-N00000-B1-0-D
PD355-00000000-N00000-B1-0-F
PD360-00000000-N00000-Ua-0-D
PD360-00000000-N00000-Ua-0-F
PD360-00000000-N00000-Uc-0-D
PD360-00000000-N00000-Uc-0-F
PD365-00000000-N00000-B1-0-D
PD365-00000000-N00000-B1-0-F
PD370-00000000-N02000-Ub-0-F
PD370-00000000-N02000-Uf-0-F
A1.04.07.001
These firmware versions are corresponding to firmware of
V2_01_03N3 version, which is the same as the firmware version
Referred Configuration List:
PD350-00000000-N00000-Ua-0-D
PD350-00000000-N00000-Ua-0-F

Overview
Upgrade Guide
6
Firmware Version Model Number
of the upgrade package. You can upgrade the firmware directly. PD350-00000000-N00000-Uc-0-D
PD350-00000000-N00000-Uc-0-F
PD355-00000000-N00000-B1-0-D
PD355-00000000-N00000-B1-0-F
PD360-00000000-N00000-Ua-0-D
PD360-00000000-N00000-Ua-0-F
PD360-00000000-N00000-Uc-0-D
PD360-00000000-N00000-Uc-0-F
PD365-00000000-N00000-B1-0-D
PD365-00000000-N00000-B1-0-F
PD370-00000000-N02000-Ub-0-F
PD370-00000000-N02000-Uf-0-F
A1.04.12.001
These firmware versions are corresponding to firmware of
V2_01_03N3 version, which is the same as the firmware version
of the upgrade package. You can upgrade the firmware directly.
Referred Configuration List:
PD350-00000000-N00000-Ua-0-D
PD350-00000000-N00000-Ua-0-F
PD350-00000000-N00000-Uc-0-D
PD350-00000000-N00000-Uc-0-F
PD355-00000000-N00000-B1-0-D
PD355-00000000-N00000-B1-0-F
PD360-00000000-N00000-Ua-0-D
PD360-00000000-N00000-Ua-0-F
PD360-00000000-N00000-Uc-0-D
PD360-00000000-N00000-Uc-0-F
PD365-00000000-N00000-B1-0-D
PD365-00000000-N00000-B1-0-F
PD370-00000000-N02000-Ub-0-F
PD370-00000000-N02000-Uf-0-F

Upgrade Guide
Overview
7
Firmware Version Model Number
V2.02.11.001
These firmware versions are corresponding to firmware of
V2_01_05PD version, which is the same as the firmware version
of the upgrade package. You can upgrade the firmware directly.
Referred Configuration List:
PD350-00000000-N00000-Ua-0-D
PD350-00000000-N00000-Ua-0-F
PD350-00000000-N00000-Ua-0-G
PD350-00000000-N00000-Uc-0-D
PD350-00000000-N00000-Uc-0-F
PD350-00000000-N00000-Uc-0-G
PD355-00000000-N00000-B1-0-D
PD355-00000000-N00000-B1-0-F
PD355-00000000-N00000-B1-0-G
PD360-00000000-N00000-Ua-0-D
PD360-00000000-N00000-Ua-0-F
PD360-00000000-N00000-Ua-0-G
PD360-00000000-N00000-Ub-0-F
PD360-00000000-N00000-Uc-0-D
PD360-00000000-N00000-Uc-0-F
PD360-00000000-N00000-Uc-0-G
PD365-00000000-N00000-B1-0-D
PD365-00000000-N00000-B1-0-F
PD365-00000000-N00000-B1-0-G
PD370-00000000-N02000-Ub-0-F
PD370-00000000-N02000-Uf-0-F.
V2.03.01.001
These firmware versions are corresponding to firmware of
V2_01_05PD version, which is the same as the firmware version
of the upgrade package. You can upgrade the firmware directly.
Referred Configuration List:
PD350-00000000-N00000-Ua-0-D
PD350-00000000-N00000-Ua-0-F
PD350-00000000-N00000-Ua-0-G
PD350-00000000-N00000-Uc-0-D
PD350-00000000-N00000-Uc-0-F
PD350-00000000-N00000-Uc-0-G