Igloohome Deadbolt 2S Installation and maintenance instructions

1
Installers &
User guide
Deadbolt 2S.
Version 0.3 12/18

As our igloohome app is frequently updated, there may be changes to this manual.
Please refer to our website igloohome.co/support for the latest version of the manual.
Welcome!
This guide will get you up and running with your igloohome
Deadbolt 2S. In the meantime, you should follow igloohome on
Facebook and Youtube!
Visit our YoutubeLike us on Facebook

Table of Contents
What’s Included 3
Specifications 4
Installation Guide
Requirements 5
Prepare Door for Installation 6
Prepare Lock for Installation 7
Installation Instructions 9
Test Lock 13
Prepare the Door Frame 14
User Guide
Lock Anatomy 15
Features 16
Unlocking and Locking 18
App Onboarding 19
Managing Access in App 20
Lock Tutorial 21
Lock Behaviour 22
Airbnb Connect 23
Troubleshooting 24

4
What’s Included
Front Assembly
& Rubber Gasket
Back Assembly
Rubber Gasket
Back Assembly
AA Alkaline Batteries x4
Bolt Assembly
Keys x5
Screw Holder
Back Plate
Strike Plate Housing &
Strike Plate
Drill Sheet 43mm (1-11/16”)
Bolt Screw x3
5mm (13/64”)
Bolt Screw x2
15mm (19/32”)
Wood Screw x4
8mm (5/16”)
Bolt Screw x2
20mm (25/32”)
Bolt Screw
Door Sensor & Magnet
Edge of the door Face of the door
Fold this line
60mm (2-3/8”) backset
70mm (2-3/4”) backset
Centerline
10mm (Optional)
54mm
Door Thickness
Drillfor:
Drillfor:
35mm (1-3/8”)
Drillfor:
45mm (1-3/4”)
Drillfor:
60mm (2-3/8”)
Drillfor:
70mm (2-3/4”) backset60mm (2-3/8”) backset
Drillfor: Drill for:
Drill a25mm (1”)hole atthe center
of door edge based onyour
DoorThickness measurements
25mm
Drill Sheet
Version 0.2 03/18

5
Specifications
Model igloohome Smart Deadbolt 2S
Material Zinc Alloy, ABS
Current Rating (Standby) ~30uA
Current Rating (Active) ~200mA
Batteries 4 x AA Alkaline
Battery Life Up to 9 months
Unlock Mechanism Bluetooth, PIN code, Physical Keys, Thumbturn
Front BackSide
145mm (5-11/16”)
60mm (2-23/64”) 11mm (7/16”) 51mm (2-1/64”) 64.5mm (2-35/64”)
160mm (6-19/64”)
* DO NOT USE: Heavy Duty, Eveready, GP, or rechargeable batteries. Duracell & Energizer alkaline batteries
recommended. Please note that using better batteries will improve the performance and lifespan of the lock.

6
Installation Guide
144.5mm (5-11/16”)
160mm (6-19/64”)
Requirements
Measurements
35mm (1-3/8”) to 60mm (2-3/8”)
10mm (25/64”)
20mm (25/32”)
>110mm (4-21/64”) for 60mm (2-3/8”) / >120mm (4-23/32”) for 70mm (2-3/4”) backset
50mm (2”)
a
b
c
d
e
a
bb
b
c
e
d
Clearance
Door Thickness

7
Please ensure that there is an existing handle on your door for push - pull access.
Not for: metal gates, glass doors or sliding doors.
If you are unsure if your door is suitable, send us web links to your door pictures to [email protected]
Prepare Door for Installation
Items needed:
Recommended
Door and door frame material : Wood
Recommended
Gap between door and door frame: <3mm (1/8”)
DrillDrill Sheet 10mm (25/64”)
Drill Bit
54mm (2-1/8”)
Hole Saw
25mm (1”)
Spade Bit
#2 Phillips Screw Driver 20mm (25/32”)
Chisel
Hammer

8
How to use the Drill Sheet
Mark the center of the holes and then drill for accuracy.
Drilling (Door)
Make sure this is
aligned to the centre
of door edge
Door edge
Fold here
before drilling
holes for side
Chiselling
Depth:
4.5mm (11/64”)
or until bolt
assembly plate
is flush against
door
Put the bolt tongue in &
chisel around the edge
54mm (2-1/8”)
Hole Saw
25mm (1”)
Spade Bit
20mm
(25/32”)
Chisel
20mm (25/32”)
Chisel

9
Prepare Lock For Installation
Set Back Assembly for Left / Right Installation
Remove Battery Cover from the Back Assembly
LR
Press the button on the
top of the battery cover,
and pull outwards.
L R
Set the toggle to ‘R’ for
right-side installation.
Right Installation
Set the toggle to ‘L’ for
left-side installation.
Left Installation
Top View of Battery Cover

10
Installation Instructions
Measure
If you are replacing your current deadbolt lock, industry standards are 60mm (2-3/8”) or 70mm
(2-3/4”) backset. To determine which backset length you should use, so measure the distance (x)
between the center of 54mm (2-1/8”) hole to door edge.
Prepare bolt assembly based on the distance (x)
Bolt ships with bolt assembly in 60mm (2-3/8”) position. If required, twist the bolt and pull to
extend (simultaneously) to 70mm (2-3/4”) backset position.
Twist upwards
Pull
Twist downwards
to lock backset position
X
54mm
(2-1/8”)
Hole

11
Insert bolt and front assembly into door edge
The ‘+ ‘ hole on the backset should be in the middle of the hole.
Screw Holder
Screws
15mm (19/32”)
Measure and cute the tailpiece if necessary
After inserting the tailpiece, measure the distance of protrusion from the door.
c
c
Please ensure that tailpiece is in vertical position.
Door thickness (mm) No. of notch to cut
60 0
55 1
45 2
40 3
35 4
Notch The recommended tailpiece
protrusion from the door is 15mm.

12
Screws
43mm (1-11/16”)
Door Sensor Installation
Adjust the position of the door sensor according to the door handling (left or right installation).
Use the 2 x 5 (13/64) mm screws to secure the door sensor to the back plate.
Screws
5mm (13/64”)
Right InstallationLeft Installation
e
d
e
e
e
e
Secure the Front Assembly using the Back Plate.
To do this, place the Back Plate (ensuring the correct side placement).
Follow this orientation
d
d
d
5
Do not overtighten the screws

13
Fit in the Rubber Gasket
Insert the front assembly cable through the rectangular hole on the rubber gasket.
The hole should be on the right side of the rubber gasket.
Assembly Cable
Door Sensor Cable
goes through the
arched hole on the
Rubber Gasket
Right InstallationLeft Installation
6

14
Connect Assembly Cable
Connect the sensor cable to the Back Assembly then connect the assembly cable from
the Front assembly through the 54mm hole to the Back Assembly. Ensure that the wire is
installed properly and securely.
LR
Fit Back Assembly to the Door Tailpiece
Left Installation Right Installation
Ensure thumbturn position is turned to ‘unlock’ position.
Thumbturn
is in vertical
position
Thumbturn is
in horizontal
position
Door Sensor
Cable
Assembly
Cable
7
8

15
Insert 4 AA Alkaline Batteries and push the battery case lid
inwards to close
Secure the Back Assembly
Screws
8mm (5/16”)
20mm (25/32”)
9
Do not overtighten the screws
Side View
10

16
Still experiencing issues?
Test Lock
Place hand over your lock to activate touchpad and hold # to lock.
Does your bolt lock?
Yes No
Congrats!
Your lock is correctly installed.
Proceed to next steps.
Bummer!
Does the bolt lock and unlock
when you turn the thumbturn?
Yes
Left-Right toggle
incorrectly set
No
Tailpiece and/or thumbturn
incorrectly set
Troubleshoot: Try Setting the
left-right toggle on your back
assembly to the correct side.
(See Pg. 10)
Troubleshoot: Dissemble lock
and install it again.
Go to igloohome.co/support for more help

17
Prepare the Door Frame
Ensure to align the lock to the door frame
and mark it down.
Same height
Door
Frame
Mark out where the bolt tongue locks then
drill a corresponding hole on door frame.
Chisel to fit the strike plate in as well.
Mark & Drill Hole
Secure strike plate housing and strike plate using 2x 25mm (1”) wood screws.
1mm
(11/64”)
25mm (1”)
Spade Bit
20mm (25/32”)
Chisel
26mm
(1-1/32”)
58mm
(2-9/32”)

18
Outer Body
Touch Screen
Keypad
Key hole Cover
(Remove cover
to access
physical key
unlock)
9V Jumpstart
Thumbturn
Privacy
Lockout Button
Battery Cover
Release
Battery Cover
User Guide
Lock Anatomy

19
Features
Timer Re-lock
After successfully unlocking, the
igloohome Deadbolt 2S will re-lock
after a period of time (between 5 to 120
seconds). The owner sets this function.
Bluetooth Master Key
The igloohome Smart Deadbolt 2S
unlocks with Bluetooth via the app.
Master PIN Code
The igloohome Smart Deadbolt 2S
unlocks with a permanent Master PIN
Code.
User PIN Code
The mobile app can generate user
PIN codes, with validity duration from
One-Time, Permanent, or a Duration
based on Date-time.
Manual Locking
Hold the ‘#’ key for 2 seconds to lock
the igloohome Deadbolt 2S.
PIN / Bluetooth Unlock
Lock
Bluetooth Guest Key
Bluetooth keys based on duration can
be generated and shared with guests.
Sensor Re-lock (Recommended Accessory)
The Sensor detects when the door is
closed and locks automatically.

20
Security Lockout Mode
After 5 consecutive unsuccessful
attempts at entering a PIN code,
the igloohome Smart Deadbolt 2S
will be unresponsive for 5 minutes.
Physical key and Bluetooth Unlock
can be used to unlock in this state.
Privacy Lockout Mode
Activate this from indoors to prevent
entry from outsiders. Physical key can
be used to unlock in this state.
Activity Logs
Entry via PIN codes and Bluetooth Key
will be logged in the app.
Bluetooth key access logs are updated
in real-time and PIN code access logs
are updated when the owner uses a
bluetooth key or update logs.
Security / Alarms
Tamper Alarm
The lock will sound if intruders try to
pry the lock from the door.
Features
Battery
Emergency Jump-Start
If battery power is drained, an
external 9 Volt battery can be used
to provide emergency power. The 2
contact points of the battery must be
aligned with the 2 contact points on
the Deadbolt 2S.
Decoy PIN Code
A total of 16 decoy digits including PIN
code can be entered to prevent the
PIN code from being exposed.