Igloohome Deadbolt 2S Installation and maintenance instructions

1
Installers &
User guide
Deadbolt 2S
Metal Grey.
Version 0.5 07/22

We’re always updating our guides because we want to keep things fresh! You can visit
igloohome.co/support periodically to view the latest version, unless, this is the latest
version. Hello you, igloohomie from the future, wow!
Hi there!
We’re so glad you’ve decided to join us on this journey to create a world
without keys. You’re officially an igloohomie!
In this guide, you’ll find everything you need to get started with your lock.
We hope that we’ve been as comprehensive and informative as possible.
Afterall, we’re here to make life easier for you (at least when it comes to your
home’s access).
If you do not find what you’re looking for, we’re working on updating it. Or… you
could reach out to us at [email protected] because we love interacting
with you! Speaking of interaction, let’s stay connected regardless. Why don’t
you join the community of igloohomies worldwide?
Watch us on
YouTube
Maybe network with
us on LinkedIn
Follow us on
Facebook
Or stalk us on
Instagram

Table of Contents
What’s Included 4
Specifications 5
Installation Guide
Requirements 6
Prepare Door for Installation 7
Prepare Lock for Installation 9
Installation Instructions 10
Test Lock 16
Prepare the Door Frame 17
User Guide
Lock Anatomy 18
Features 19
Modes of Access 21
App Onboarding 23
Managing Access via the app 26
Manage Ecosystem Products via the app 28
Manage Lock Features 31
Manage Lock Settings 33
View Activity Logs 34
Emergency Jumpstart 35
Physical Key 36
Connect with Airbnb 37
Audio and LED Indications 38
Intergrations 39
Troubleshooting 40

4
What’s Included
Front Assembly
& Rubber Gasket
Back Assembly
Rubber Gasket
Back Assembly
AA Alkaline Batteries x4
Bolt Assembly
Keys x4
Screw Holder
Back Plate
Strike Plate Housing &
Strike Plate
Drill Sheet 43mm (1.69”)
Bolt Screw x3
5mm (0.019”)
Bolt Screw x2
22mm (0.87”)
Wood Screw x4
8mm (0.03”)
Bolt Screw x2
20mm (0.78”)
Bolt Screw
Keyhole
Cover x1
Door Sensor & Magnet
Edge of the door Face of the door
Fold this line
60mm (2-3/8”) backset
70mm (2-3/4”) backset
Centerline
10mm (Optional)
54mm
Door Thickness
Drill for:
Drill for:
35mm (1-3/8”)
Drill for:
45mm (1-3/4”)
Drill for:
60mm (2-3/8”)
Drill for:
70mm (2-3/4”) backset60mm (2-3/8”) backset
Drill for: Drill for:
Drill a 25mm (1”) hole at the center
of dooredge based onyour
DoorThickness measurements
25mm
Drill Sheet
Version0.2 03/18

5
* DO NOT USE: Heavy Duty, Eveready, GP, or rechargeable batteries. Please note that using recommended
battery brands such as Panasonic, Duracell, or Energizer will improve the performance and lifespan of the lock.
Front BackSide
63mm (2.5”) 19mm (0.7”) 30mm (1.18”)
33mm (1.30”)
70mm (2.8”)
148mm (5.8”)
167mm (6.6”)
Model IGB4
Weight Net: 1.2kg, Gross: 1.6kg
Body Zinc Alloy, ABS, Acrylic
Modes of Access (Entry) PIN codes, Bluetooth keys, Mechanical keys
Modes of Access (Exit) Thumbturn
Power Type 4 AA alkaline batteries
Battery Life Up to 10 months
Emergency Power 9V Alkaline Battery
Battery Operating Temp. -20°C to 54°C / -4°F to 129°
Operation Temp. -25°C to 50°C / -13°F to 122°F
Certifications IP65, CE, FCC, Giteki, ANSI Grade 2
Protocols Bluetooth 4.2, algoPIN™ technology
Usage Advised to be installed under sheltered areas,
not to be exposed to wet weather conditions.
Specifications

6
Installation Guide
145mm (5.70”)
160mm (6.29”)
Requirements
Measurements
35mm (1.37”) to 60mm (2.36”)
10mm (0.39”)
20mm (0.78”)
>110mm (4.33”) for 60mm (2.36”) / >120mm (4.72”) for 70mm (2.75”) backset
50mm (1.96”)
a
b
c
d
e
a
bb
b
c
e
d
Clearance
Door Thickness

7
Please ensure that there is an existing handle on your door for push - pull access.
Not for: metal gates, glass doors or sliding doors.
If you are unsure if your door is suitable, send us web links to your door pictures to [email protected]o
Prepare Door for Installation
Items needed:
Recommended
Door and door frame material : Wood
Recommended
Gap between door and door frame: <3mm (0.01”)
DrillDrill Sheet 10mm (0.39”)
Drill Bit
54mm (2.12”)
Hole Saw
25mm (0.98”)
Spade Bit
#2 Phillips Screw Driver 20mm (0.78”)
Chisel
Hammer

8
How to use the Drill Sheet
Mark the center of the holes and then drill for accuracy.
Drilling (Door)
Make sure this is
aligned to the centre
of door edge
Door edge
Fold here
before drilling
holes for side
Depending on
Door type
Chiselling
Put the bolt tongue in &
chisel around the edge
54mm (2.12”)
Hole Saw
10mm (0.39“)
Drill Bit
60-70mm
(2.36 - 2.76”)
2.7mm (0.11”)
Deep
57mm
(2.25”)
25mm (0.98”)
25mm (0.98”)
Spade Bit
20mm
(0.78”)
Chisel
20mm (0.78”)
Chisel

9
Prepare Lock For Installation
Set Back Assembly for Left / Right Hand Installation
Set the toggle to ‘RH’ for
right-hand installation
Right Hand Installation
Set the toggle to ‘LH’ for
left-hand installation
* Hinge is on your left.
* Hinge is on your right.
Left Hand Installation
Remove Battery Cover from the Back Assembly
Press the button on the
top of the battery cover,
and pull outwards.
Top View of Battery Cover
Hinge
Outside
Outside
Hinge
Note: If your BT ID is greater than IGB412 please skip this step, Left/Right Hand
installation will be configured in the App.

10
Installation Instructions
Measure
If you are replacing your current deadbolt lock, industry standards are 60mm (2.36”) or 70mm
(2.75”) backset. To determine which backset length you should use, so measure the distance (x)
between the center of 54mm (2.12”) hole to door edge.
Prepare bolt assembly based on the distance (x)
Bolt ships with bolt assembly in 60mm (2.36”) position. If required, twist the bolt and pull to
extend (simultaneously) to 70mm (2.75”) backset position.
Twist upwards
Pull
Twist downwards
to lock backset position
XX
54mm
(2.12”)
Hole

11
Insert bolt and front assembly into door edge
The ‘+ ‘ hole on the backset should be in the middle of the hole.
Screw Holder
Screws
15mm (0.59”)
c
c
Please ensure that tailpiece is in vertical position.
Measure and cut the tailpiece if necessary
After inserting the tailpiece, measure the distance of protrusion from the door.
Door thickness (mm) No. of notch to cut
60 0
55 1
45 2
40 3
35 4
Notch
Note: If your BT ID is greater than IGB412 please skip this step,
Left/Right Hand installation will be configured in the App.

12
Screws
43mm (1.69”)
Door Sensor Installation
Adjust the position of the door sensor according to the door handling (left or right hand installation).
Use the 2 x 5mm (0.19”) screws to secure the door sensor to the back plate.
Screws
5mm (0.19”)
Right-hand Installation Left-hand Installation
e
d
e
e
e
e
Secure the Front Assembly using the Back Plate.
To do this, place the Back Plate (ensuring the correct side placement).
Follow this orientation
d
d
d
5
Do not overtighten the screws

13
Right-hand Installation Left-hand Installation
Fit in the Rubber Gasket
Insert the front assembly cable through the rectangular hole on the rubber gasket.
The hole should be on the right side of the rubber gasket.
Assembly Cable
Door Sensor Cable
goes through the
arched hole on the
Rubber Gasket
6

14
Connect Assembly Cable
Connect the sensor cable to the Back Assembly then connect the assembly cable from the
Front assembly through the 54mm (2.12”) hole to the Back Assembly. Ensure that the wire
is installed properly and securely.
Door Sensor
Cable
Assembly
Cable
7
8Remove Battery Cover from the Back Assembly
Press the button on the
top of the battery cover,
and pull outwards.
Top View of Battery Cover

15
Fit Back Assembly to the Door Tailpiece
Ensure thumbturn position is turned to ‘unlock’ position.
Thumbturn
is in vertical
position
Thumbturn is
in horizontal
position
Right-hand Installation Left-hand Installation
9
Secure the Back Assembly
Screws
8mm (0.31”)
20mm (0.78”)
Do not overtighten the screws
10

16
Insert 4 AA Alkaline Batteries and push the battery case lid
inwards to close
Side View
11

17
Still experiencing issues?
Test Lock
Place hand over your lock to activate touchpad and hold ‘Unlock’ icon to lock.
Does your bolt lock?
Ye s No
Congrats!
Your lock is correctly installed.
Proceed to next steps.
Bummer!
Does the bolt lock and unlock
when you turn the thumbturn?
Ye s
Left-Right toggle
incorrectly set
RHLH
No
Tailpiece and/or thumbturn
incorrectly set
Troubleshoot: Try Setting the
left-right toggle on your back
assembly to the correct side.
(See Pg. 10)
Troubleshoot: Dissemble lock
and install it again.
Go to igloohome.co/support for more help

18
Prepare the Door Frame
Ensure to align the lock to the door frame
and mark it down.
Same height
Door
Frame
Mark out where the bolt tongue locks then
drill a corresponding hole on door frame.
Chisel to fit the strike plate in as well.
Mark & Drill Hole
Secure strike plate housing and strike
plate using 2x 25mm (0.98”) wood screws.
Paste the magnet opposite the door
sensor.
1mm
(0.0039”)
25mm (0.98”)
Spade Bit
20mm (0.78”)
Chisel
26mm
(1.02”)
58mm
(2.28”)
4
Door Sensor
Magnet
Door
Sensor

19
Front & Back Assembly
Touch Screen
Keypad
Unlock
Key hole Cover
(Remove cover
to access
physical key
unlock)
9V Jumpstart
Clear
Thumbturn
Multi-Function
Button
Battery Cover
Release
Battery Cover
User Guide
Lock Anatomy

20
Features
Auto Lock
Emergency Jumpstart
Heighten security and throw o
onlookers by entering random digits
before your actual PIN code.
Easily jumpstart the lock with a 9V
battery if batteries are drained.
Manual Relock
Hold the ‘Unlock’ button for 1 second
to manually lock the Deadbolt 2S.
Lock
Battery
Master Bluetooth Key
The igloohome Deadbolt 2S unlocks
with Bluetooth via the app.
Master PIN Code
The igloohome Deadbolt 2S unlocks
with a permanent Master PIN Code.
Guest PIN Code
The igloohome mobile app can
generate multiple types of User Pin
codes, e.g. One-Time, Permanent &
Duration.
PIN / Bluetooth Unlock
Guest Bluetooth Key
The igloohome mobile app can
generate and share Bluetooth keys
(based on duration with guests to
unlock the Deadbolt 2S.
Low Battery Alert
An intuitive audio and LED alert will
prompt you to change the batteries
when it runs low.