Ihse Draco U-Switch 476 Series Specification sheet

Excellence in KVM and Video
Manual:
We continue to develop and improve our products, adding new
functions and features on a regular basis, so we want you to al-
ways have the latest manual. For this reason, we do not include
a manual in an electronic or printed form but kindly ask you to
download the latest manual using the following link:
http://www.ihse.de/leadmin/redakteur/pdf/manuals/m476.
pdf
Draco U-Switch
Quick Setup
Series 476
Quick Setup Quick SetupQuick Setup
Draco U-Switch Series 476 Draco U-Switch Series 476Draco U-Switch Series 476
3. Technical Support
Prior to contacting support please ensure you have read the quick
setup and manual, and then installed and setup your device as re-
commended.
3.1 Support Checklist
To efciently handle your request it is necessary to complete our
checklist for support and problem cases.
http://www.ihse.de/leadmin/redakteur/pdf/support/checklist.pdf
Please keep the following information available before you call:
■Company, name, phone number and email
■Type and serial number of the device (see bottom of device)
■Date and number of sales receipt, name of dealer if necessary
■Issue date of the existing manual
■Nature, circumstances and duration of the problem
■Involved components (such as graphic source/CPU, OS, gra-
phic card, monitor, USB-HID/USB 2.0 devices, interconnect
cable) including manufacturer and model number
■Results from any testing you have done
3.2 Shipping Checklist
1. To return your device, contact your dealer to obtain a RMA
number (Return-Material-Authorization).
2. Package your devices carefully, preferably using the original
box. Add all pieces which you received originally.
3. Note your RMA number visibly on your shipment.
Devices that are sent in without a RMA number cannot be
accepted. The shipment will be sent back without being
opened, postage unpaid.
!
IHSE GmbH
Maybachstrasse 11
88094 Oberteuringen
Germany
Phone [phone]
Fax [phone]
Web www.ihse.de
E-Mail [email protected]
Skype ihse.support
Oce hours:
Monday - Thusday 8:00 am to 4:30 pm
Friday 8:00 am to 3:00 pm

2.3.1. Switching via mouse (panning)
When panning the mouse cursor beyond the border of the monitor,
you can switch from your console to monitors located horizontally
or vertically.
Monitors that are only arranged horizontally or vertically (e. g. 4x1,
8x1, 1x4, 1x8) have to be operated with the one-dimensional Multi-
Screen mode. Monitors that are arranged vertically and horizontally
(e. g. 2x2, 4x2) have to be operated with the two-dimensional Multi-
Screen mode.
1. Activate the switching via mouse by executing the
following keyboard sequences:
■One-dimensional mode (horizontal):
‚Hot Key‘, <x>, <1>, <Enter>
■Two-dimensional mode:
‚Hot Key‘, <x>, <2>, <Enter>
■One-dimensional mode (vertical):
‚Hot Key‘, <x>, <3>, <Enter>
2. Move the mouse pointer beyond the border of the
monitor to the vertically or horizontally located
monitor.
Switching to the new monitor will occur instantly.
3. Deactivate the switching via mouse by executing the
following keyboard sequence:
‚Hot Key‘, <x>, <0>, <Enter>
Additional software for calibration and positioning of the
adjacent horizontal or vertical monitor.
When using sources (computers, CPUs) in multi-head
operation (e. g. dual-head), the switching is only working
manually via keyboard commands. Any non-observance
may have a negative inuence on the stability of the system.
The function cannot be guaranteed when using wireless
keyboards and mice.
2.3. Operation
2.3.1. Switching via keyboard
From your console, you can switch between different monitors
using a keyboard sequence as follows:
1. Open Command Mode with the ‚Hot Key‘ (2x <Right Shift>).
2. Enter the number of the specic source or monitor and con-
rm with the <Enter> key.
Command Mode will close and the keyboard LEDs will
return to their previous status.
Keyboard and mouse are connected to the specied source
or monitor.
When using the numeric keypad for switching, a conrmation
of the switching operation by using the <Enter> key is not
necessary.
2.2. System Overview
This section illustrates typical installations of the U-Switch:
!
Draco U-Switch Series 476 Draco U-Switch Series 476
Draco U-Switch Series 476
1. System Setup
First time users are recommended to carry out a test placement
by setting up the system in a single room. This will allow you to
identify and solve any cabling problems, and experiment with your
system more conveniently.
1. Switch off all devices.
2. Connect the USB cables to the CPUs (CON Units) and to
the U-Switch
3. Connect mouse and keyboard to the U-Switch
4. Connect the 5VDC power supply with the U-Switch
5. Power up the system. When powering the U-Switch, a
boot process will be enabled. The duration depends from
the size of the U-Switch (4 port version: ca. 30 sec, 8 port
version: ca. 50 sec).
6. Only after completion of the boot process, the U-Switch
can be used and keyboard and mouse will be enabled.
2. Specifications
2.1. Package Contents
Your extender package contains the following items:
■U-Switch
■5VDC international power supply unit
■Country specic power cord
■Quick Setup
■4x USB cable ( 1.8 m, USB type A to type B)
Additional content for K476-8U/ K476-4U2
■4x USB cable (1.8 m, USB type A to type B)
If anything is missing, contact your dealer.
!
!
!
Quick Setup Quick SetupQuick Setup
12 3
1. Sources (computers, CPU, KVM extender CON units)
2. CPU Unit
Keyboard, mouse