Impex BBPB-1106 User manual

NOTE:
Please read all
instructions carefully
before using this product
Table of Contents
Safety Notice
Important Assembly
Information
Care and Maintenance
Parts List
Warranty
Ordering Parts
Model
BBPB-1106
Retain This
Manual for
Reference
161003
OWNER'S
&
ASSEMBLY
MANUAL
BIONIC BODY
PLYOMETRIC BOX
BBPB-1106
IMPORTANT: Please read this manual before commencing
assembly of this product.
IMPEX®INC.
2801 South Towne Avenue, Pomona, California 91766
Tel: [phone] Fax: [phone]
www.marcypro.com
[e-mail]

©IMPEX INC. www.marcypro.com
1
TABLE OF CONTENTS
BEFORE YOU BEGIN....................................................................................………… 1
IMPORTANT SAFETY NOTICES...................................................................……….. 2
EXERCISE GUIDELINES…………………………………………………………………. 3
IMPORTANT ASSEMBLY INFORMATION, CARE AND MAINTENANCE.................. 5
WEIGHT CAPACITY, OPERATING NOTES …………………………………………… 5
PARTS LIST…………………………………………………………………………………. 6
ASSEMBLY INSTRUCTIONS…………………………………………………………….. 7
WARRANTY.................................................................................................…………… 11
ORDERING PARTS.......................................................................................…………. 11
BEFORE YOU BEGIN
Thank you for selecting the Bionic Body BBPB-1106 by IMPEX®INC. For
your safety and benefit, read this manual carefully before using the
equipment. As a manufacturer, we are committed to provide you complete
customer satisfaction. If you have any questions, or find there are missing
or damaged parts, we guarantee you complete satisfaction through direct
assistance from our factory. To avoid unnecessary delays, please call our
TOLL-FREE customer service number. Our Customer Service Agents will
provide immediate assistance to you.
Toll-Free Customer Service Number
1-800-999-8899
Mon. – Fri. 9 a.m. – 5 p.m. PST
www.marcypro.com
[e-mail]

©IMPEX INC. www.marcypro.com
2
IMPORTANT SAFETY NOTICE
This exercise equipment is built for optimum safety. However, certain precautions apply
whenever you operate a piece of exercise equipment. Be sure to read the entire manual
before you assemble or operate your equipment. In particular, note the following safety
precautions:
1. Keep children and pets away from the equipment at all times. DO NOT
Leave children unattended in the same room with the equipment.
2. Only one person at a time should use the equipment.
3. If the user experiences dizziness, nausea, chest pain, or any other abnormal
symptoms, STOP the workout at once. CONSULT A PHYSICIAN
IMMEDIATELY.
4. Position the equipment on a clear, leveled surface. DO NOT use the equipment
near water or outdoors.
5. Always wear appropriate workout clothing when exercising. DO NOT wear
robes or other clothing that could become caught in the equipment. Running
or aerobic shoes are also required when using the equipment.
6. Use the equipment only for its intended use as described in this manual. DO
NOT use attachments not recommended by the manufacturer.
7. Do not place any sharp object around the equipment.
8. Disabled person should not use the equipment.
9. Before using the equipment to exercise, always do stretching exercises to
properly warm up.
10. Never operate the equipment if the equipment is not functioning properly.
11. A spotter is recommended during exercise.
12. This equipment is designed and intended for home and consumer use only, not
for commercial use.
WARNING: BEFORE BEGINNING ANY EXERCISE PROGRAM, CONSULT YOUR
PHYSICIAN. THIS IS ESPECIALLY IMPORTANT FOR INDIVIDUALS OVER THE
AGE OF 35 OR PERSONS WITH PRE-EXISTING HEALTH PROBLEMS. READ ALL
INSTRUCTIONS BEFORE USING ANY FITNESS EQUIPMENT. IMPEX INC.
ASSUMES NO RESPONSIBILITY FOR PERSONAL INJURY OR PROPERTY
DAMAGE SUSTAINED BY OR THROUGH THE USE OF THIS PRODUCT.
SAVE THESE INSTRUCTIONS.

©IMPEX INC. www.marcypro.com
3
EXECISE GUIDELINES
Building Muscle and Gaining Weight
Unlike aerobic exercise, which emphasizes endurance training, anaerobic exercise focuses on
strength training. A gradual weight gain can occur while building the size and strength of muscles.
While developing muscle mass, your body adapts to the stress placed upon it. You can modify
your diet to include foods such as meat, fish and vegetables. These foods help muscles recover
and replenish important nutrients after a strenuous workout.
Muscle Strength and Endurance
To achieve the greatest benefit from exercise, it is important to develop an exercise program that
allows you to work all of the major muscle groups equally.
To increase muscles strength; follow this principle:
Increasing resistance and maintaining the number of repetitions of an exercise results in
increased muscle strength.
To tone your body, follow the principle: Decreasing resistance plus increasing the number of
repetitions of an exercise results in increased body tone.
Once you feel comfortable with an exercise, you can change the resistance, the number of
repetitions, or the speed at which you do the exercise. It is not necessary to change all three
variables. For example, let’s say that you are training at 50 lbs and performing the exercise 10
times in 3 minutes. When this becomes too easy, you may decide to move up lifting 60 lbs for the
same number of repetitions in the same amount of time. Lifting more weights fewer times most
often develops muscle strength. To gain both muscle strength and endurance, it is recommended
that you perform each exercise 15 to 20 reps per set.
Training Intensity
How hard you begin to train depends on your overall level of fitness. The soreness you
experienced can be lessened by decreasing the load you place on your muscles and by
performing fewer sets. To avoid injury, you should gradually work into an exercise program and
set the load to your individual fitness level. The load should increase as your fitness level
increases.
Muscle soreness is common, especially when you first start exercising. If you are painfully sore for
a long time, it may be time to change your program. Eventually, your muscle system will become
accustomed to the stress and strain placed on it.

©IMPEX INC. www.marcypro.com
4
Beginning a Strength Building Program
Warming Up
To begin strength training, it is important to stretch and perform light exercise for 5 to 10 minutes.
This helps prepare the body for more strenuous exercise by increasing circulation, raising your
body temperature and developing more oxygen to your muscles.
Workout
For each workout, to keep in mind that muscle soreness that lasts for a long period in not
desirable and may mean that injury has occurred.
Cool Down
At the end of each workout, perform slow stretching exercises for 5 to 10 minutes. Ease into each
stretch only going as far as you can. This stage allows your muscles wind down after training.
To provide a total workout program it is also recommended that 2 to 3 days of aerobic exercise is
performed in addition to the strength training.
Drinking Water
For the body to function properly, it must be properly hydrated. If you are exercising, you should
increase your fluid intake. The reason for this is that the water you take in will leave your system
through the sweating mechanism that cools your body during exercise. The water you lose
through exercise must be replaced so that the muscles can recover properly.
Rest Day
Although you may not feel like doing it, taking a rest day at least once a week is important
because it gives you body a chance to heal it self. Continuously working your muscle will result in
over training which will not benefit in the long run.

©IMPEX INC. www.marcypro.com
5
IMPORTANT ASSEMBLY INFORMATION
Tools Required for Assembly: Electrical Drill
NOTE: It is highly recommended that this equipment is assembled by two or
more people to avoid possible injury.
Ensure all board edges are aligned when screwing boards together.
Ensure to attach the correct Foam Sheet to correct Board.
CARE AND MAINTENANCE
1. Inspect and tighten all parts before using the equipment.
2. The Vinyl Cover can be cleaned using a damp cloth and mild non-abrasive detergent.
DO NOT use solvents.
3. Examine the equipment regularly for signs of damages or wear.
4. Replace any defective components immediately and/or keep the equipment out of use until
repair.
5. Failure to examine regularly may affect the safety level of the equipment.
WEIGHT CAPACITY AND DIMENSION
1. Maximum weight capacity (including user weight) on Box: 250 lbs.
2. Box assembled dimension: 20” x 16” x24”.
3. Training Area: 6’ x 6’ x 10’ (L x W x H)

©IMPEX INC. www.marcypro.com
6
BBPB-1106 PARTS LIST
PART
NO.
DESCRIPTION
SIZE
QUANTITY
1
Board-1
21 ⅛” x 17 ¼”
2
2
Board-2
18 ⅜” x 14 ½”
2
3
Board-3
21 ⅛” x 14 ½”
2
4
Board-4 (Support Board)
17 ¼” x 13 ¼”
1
5
Foam Sheet-1
22 ½” x 18 ½”
2
6
Foam Sheet-2
19 ⅝” x 15 ⅝”
2
7
Foam Sheet-3
22 ½” x 15 ⅝”
2
8
Self-Taping Screw
M4 x 1 ⅜”
44
9
Box Vinyl Cover
1

©IMPEX INC. www.marcypro.com
7
ASSEMBLY INSTRUCTIONS
STEP-1
A.) Attach two Board-1s (part #1) to one Board-3 (part #3) from each side. Align the edges and
secure them together with twelve Self-taping Screws (part #8).
B.) Attach Board-4 (part #4) onto the Board-3. Secure it to Board-3 with two Self-taping Screws
from bottom of Board-3.
C.) Attach two Board-2s (part #2) to Board-3 and Board-1from each side. Secure them together
with twelve Self-taping Screws.

©IMPEX INC. www.marcypro.com
8
STEP-2
A.) Attach one Board-3 (part #3) onto Board-1, 2, and 4. Secure them together with eighteen Self-
taping Screws (part #8).

©IMPEX INC. www.marcypro.com
9
STEP-3
A.) Peel off the adhesive coating from Foam Sheet-1 (part #5) and attach the two Foam Sheet-1s
to the two Board-1s (part #1).
B.) Peel off the adhesive coating from Foam Sheet-2 (part #6) and attach the two Foam Sheet-2s
to the two Board-2s (part #2).
C.) Peel off the adhesive coating from Foam Sheet-3 (part #7) and attach the two Foam Sheet-3s
to the two Board-3s (part #3).

©IMPEX INC. www.marcypro.com
10
STEP-4
A.) Insert the Box into Box Vinyl Cover (part #9). Pull up until snug and close the cover with the
zipper on cover.

©IMPEX INC. www.marcypro.com
11
IMPEX®INC.
LIMITED WARRANTY
IMPEX Inc. ("IMPEX®") warrants this product to be free from defects in workmanship and material, under
normal use and service conditions, for a period of two years on the Frame from the date of purchase. This
warranty extends only to the original purchaser. IMPEX's obligation under this Warranty is limited to
replacing or repairing, at IMPEX's option.
All returns must be pre-authorized by IMPEX. Pre-authorization may be obtained by calling IMPEX
Customer Service Department at 1-800-999-8899. All freights on products returned to IMPEX must be
prepaid by the customer. This warranty does not extend to any product or damage to a product caused by
or attributable to freight damage, abuse, misuse, improper or abnormal usage or repairs not provided by an
IMPEX authorized service center or for products used for commercial or rental purposes. No other warranty
beyond that specifically set forth above is authorized by IMPEX.
IMPEX is not responsible or liable for indirect, special or consequential damages arising out of or in
connection with the use or performance of the product or other damages with respect to any economic loss,
loss of property, loss of revenues or profits, loss of enjoyments or use, costs of removal, installation or other
consequential damages or whatsoever natures. Some states do not allow the exclusion or limitation of
incidental or consequential damages. Accordingly, the above limitation may not apply to you.
The warranty extended hereunder is in lieu of any and all other warranties and any implied warranties of
merchantability or fitness for a particular purpose is limited in its scope and duration to the terms set forth
herein. Some states do not allow limitations on how long an implied warranty lasts. Accordingly, the above
limitation may not apply to you.
This warranty gives you specific legal right. You may also have other rights which vary from state to state.
Register on-line at www.marcypro.com
IMPEX®INC.
2801 South Towne Avenue
Pomona, CA 91766
ORDERING REPLACEMENT PARTS
Replacement parts can be ordered by calling our Customer Service Department toll-free at 1-800-999-8899
during our regular business hours: Monday through Friday, 9 am until 5 pm Pacific standard time.
[e-mail]
When ordering replacement parts, always give the following information.
1. Model
2. Description of Parts
3. Part Number
4. Date of Purchase