iNels RF KEY-40/W User manual

WIRELESS SWITCHES
KEY FOB
Combination of iNELS switching element for universal use. It can be used to control
electrical appliances, lights, sockets, garage doors, etc.
EN

Package
Switch unit, 1-channel RFSAI-11B-SL
The individual elements in the iNELS set are paired and their functions are preset. iNELS kit with key fob
enables the basic function of controlling electrical appliances - ON / OFF. The appliances can be controlled
independently by a key fob.
Controller – key fob RF KEY-40/W, RF KEY-40/B
ON function of
switching unit no. 1
OFF function of
switching unit no. 1
ON function of
switching unit no. 2
OFF function of
switching unit no. 2
EAN 8595188182997 (Controller – key fob White + 2x Switch unit, 1-channel)
EAN 8595188182980 (Controller – key fob Black + 2x Switch unit, 1-channel)
EAN 8595188184588 (Controller – key fob Black + 1x Switch unit, 1-channel)

+
123
RF KEY 40
+
RF KEY 40/B – 4 button controller - keychain (remote control), black
RF KEY 40/W – 4 button controller - keychain (remote control), white
Detailed manual
Characteristics
• Key fob-sized remote control - used to control, lights, gate, garage door, shitters, etc.
• 4 buttons, each of which allows you to control an unlimited number of components.
• Replaceable battery (3 V CR 2032 - included in the package) with a service life of approx. 5 years (depen-
ding on the frequency of use).
Insertion and replacement of a battery RF KEY-40
Safe handling
When handling a device unboxed it is important to avoid contact with liquids. Never place the device
on the conductive pads or objects, avoid unnecessary contact with the components of the device.
Use a coin to open the key fob and
remove the front cover. Carefully tap
the device out of the bottom cover.
Slide the CR2032 battery into the
battery holder. Observe the polarity.
Insert the device into the bottom
cover. Attach the front of the cover
and click.
Controller – key fob RF KEY-40

RF KEY-40
Supply voltage:
Battery life:
Transmission indication:
Number of buttons:
Communication Protocol:
Frequency:
Signal transmission method:
Range:
Other data
Operating temperature:
Operating position:
Colour design
Protection:
Pollution degree:
Dimensions:
Weight:
Related standards:
3 Vbattery CR 2032
about 5 years depending on the frequency of use
red LED
4
RFIO2
868,5 MHz
one-way addressed message
in the open up to 200 m
-10 ... +50 °C (14 ... 122 °F)
any
white, black
IP20
2
64 x 25 x 10 mm
16 g
EN 60669, EN 300 220, EN 301489,
No 426/2000 Coll.
Technical parameters
Attention
When you install iNELS RF Control system, you have to keep a minimal distance of 1 cm (0.4“) between each
unit. Between the individual commands must be an interval of at least 1s.

RFSAI-11B-SL
Characteristics
• The switching unit with 1 output channel is used to control appliances, lights, etc.
• The BOX design lets you mount it right in an installation box, a ceiling or a controlled appliance cover.
• The switched load up to 8 A (2.000 W).
• Single-function design - switch on/o .
• The output on the switching unit can be controlled by up to 25 channels (1 channel represents one button on
the controller).
• The programming button on the unit is also used for manual control of the output.
• Memory status can be pre-set in the event of a power failure.
• For components labeled as iNELS RF Control2 (RFIO2), it is possible to set the repeater function via the
RFAF/USB service device.
• Communication frequency with bidirectional protocol iNELS RF Control2(RFIO2).
Installation options
In to the installation box into the ceiling light cover under ceiling mounted
Detailed manual
Switch unit, 1-channel
RFSAI-11B-SL

RFSAI-11B-SL
230 V AC
50-60 Hz
7 VA / cos φ = 0.1 / 0.7 W
1x switching contacts (AgSnO2)
8 A / AC1 / 2000 VA
10 A / <3 s
250 V AC1
button PROG (ON/OFF)
868.5 MHz
-15 ... + 50 °C (5 ... 122 °F)
free at lead-in wires
IP40
III.
43 x 44 x 22 mm
31 g
EN 60730, EN 63044, EN 300 220, EN 301 489
Supply voltage:
Supply voltage frequency:
Power apparent / dissipated:
Output:
Number of contacts:
Rated current: / switching power
Peak current:
Max. switching voltage:
Communation:
Manual:
Frequency:
Other data:
Operating temperature:
Mounting:
Protection:
Overvoltage category:
Dimensions:
Weight:
Related standards:
Technical parameters

L
N
RFSAI-11B-SL
8 mm
20~16 AWG
0.2 ~1.5 mm2
SLIDE IN
PUSH IN
RELEASE
Solid conductor
Compatibility
The device can be combined with devices of iNELS RF Control2with RFIO2protocol.
Connection
The screw-less terminal
S - external input
N - neutral wire
L - phase wire
V - output
i- programing button
- manual controll
- output status indication

60 - 90 % 80 - 95 % 20 - 60 % 0 - 10 %
x
RFRP-20
80- 90 %
Radiofrequency signal penetration through various construction materials
Range up to 200 m (2 inch) in open space, if the signal is insucient between the controller and unit, use the
signal repeater RFRP-20 or protocol component RFIO2that supports this feature.
brick walls wooden structures
with plaster boards reinforced concrete metal partitions common glass

Warning
Instruction manual is designated for mounting and also for the usage of the device. It is always a part of its pac-
king. Installation and connection can be carried out only by a person with adequate professional qualification
with understanding this instruction manual and functions of the device, and while observing all valid regulations.
Trouble-free function of the device also depends on transportation, storing and handling. In case you notice any
sign of damage, deformation, malfunction or missing part, do not install this device and return it to its seller.
It is necessary to treat this product and its parts as electronic waste after its lifetime is terminated. Before
starting installation, make sure that all wires, connected parts or terminals are de-energized. While mounting
and servicing observe safety regulations, norms, directives and professional, and export regulations for working
with electrical devices. Do not touch parts of the device that are energized – life threat. Due to transmissivity
of RF signal, observe correct location of RF components in a building where the installation is taking place. RF
Control is designated only for mounting in interiors. Devices are not designated for installation into exteriors
and humid spaces. The must not be installed into metal switchboards and into plastic switchboards with metal
door – transmissivity of RF signal is then impossible. RF Control is not recommended for pulleys etc. – radio-
frequency signal can be shielded by an obstruction, interfered, battery of the transceiver can get flat etc. and
thus disable remote control.

.................................................................................................................................................................................................................................................
.................................................................................................................................................................................................................................................
.................................................................................................................................................................................................................................................
.................................................................................................................................................................................................................................................
.................................................................................................................................................................................................................................................
.................................................................................................................................................................................................................................................
.................................................................................................................................................................................................................................................
.................................................................................................................................................................................................................................................
.................................................................................................................................................................................................................................................
.................................................................................................................................................................................................................................................
.................................................................................................................................................................................................................................................
.................................................................................................................................................................................................................................................
.................................................................................................................................................................................................................................................
.................................................................................................................................................................................................................................................
.................................................................................................................................................................................................................................................
.................................................................................................................................................................................................................................................
.................................................................................................................................................................................................................................................
.................................................................................................................................................................................................................................................
.................................................................................................................................................................................................................................................
.................................................................................................................................................................................................................................................
.................................................................................................................................................................................................................................................
.................................................................................................................................................................................................................................................
.................................................................................................................................................................................................................................................
.................................................................................................................................................................................................................................................
.................................................................................................................................................................................................................................................
.................................................................................................................................................................................................................................................
.................................................................................................................................................................................................................................................
.................................................................................................................................................................................................................................................
Notes

Backend
CLOUD
Smart watch
Smart TV
Smart RF gateway
Wi-Fi
iNELS rádiójel
A smart RF gateway is required for control via the iNELS application.
Designed & Manufactured by:
ELKO EP, s.r.o. Palackého 493, 769 01 Holešov, Všetuly,
Czech republic, www.elkoep.com, Hotline: [phone]