INNOVAPLAS THE TUX User manual

THE TUX IN GROUND POOL STEP
Sandbags
Contents of the Tux package SKU # 2002
Sand
50 lbs
Tools required (not included)
(not included)
x1 x3
x2 x3
REV. 10/02/10
PN: 950-017
Use a cordless drill
with a 5/16" drill bit.
Use 7/16"
wrench
WARNING
Do not dive or jump from step or ladder.
Use BATTERY operated tools to avoid electric shocks.
Install step on flat surface, following the manufacturers
instructions.
Remove step from pool during freezing climate season.
Manufacturer cannot be held responsible for injuries caused
by abusive use of product.
Ask your city about specific regulations that apply to your
above-ground pool and ladder.
105-012
105-005
115-011 (2 in.)
SCREW BAG 140-017
115-010 (1 in.)
PG. 1
250 industrial blv,
St-Germain (Québec),
Canada J0C1K0

1) Slide the support arm onto the
handrail prior to installation.
2) Insert the nuts and washers in
place
3) Secure the handrails in place with
the 2 screws provided.
A
B
C
1) Place the sandbags into the
underside of the step.
Immerse the assembly into
water.
1) Fasten the arm in
place with pool manufacturer
recommended screws and inserts.
2) Drill two holes through
the handrail to secure
the support arm in place.
Sable
Sable
60 lbs
Sable
60 lbs
Sand
50 lbs
3) Secure the support arm
in place with the nut and
bolt included.
REV. 10/02/10
USE APPROPRIATE
FASTENERS AS
SPECIFIED BY
THE POOL MANUFACTURER.
(SCREWS NOT INCLUDED)
MANUFACTURER
WARRANTY
1 Year on The Tux
1 year on the hardware
To prevent injuries use
a minimum of two individuals
to move the assembly into
the pool once the sandbags
are inside the step.
WARNING
x2
x2
x2
105-012
105-005
115-011 (2 in.)
x1 x1
105-005
Use a cordless drill with
a 5/16" drill bit.
115-010 (1 in.)
PG. 2
250 industrial blv,
St-Germain (Québec),
Canada J0C1K0