INNOVAPLAS AQUARIUS 5010 User manual

REV. 26/09/14
PN: 110-073
115-014 (3/4 IN.)
x12
x2
x4
115-010
x2
x2
105-005
x2
115-018 (2 1/2 in.)
x2
A
115-005
105-005 105-012
x6
x6
x6
PG. 1
x2
50 lbs
x6
105-005
x6 x6 x2
115-005
115-018
105-012
x2
x2
x1
x3
x2
115-015
115-014
x14 x8
x1
Screw Kit 140-028
x2
Screw Kit 140-016
AQUARIUS 5010 WITH SELF-LATCHING 9600
Required tools and supplies (not included)
Contents of Self-Latching box SKU # 9600
WARNING
Do not dive or jump from step or ladder.
Use BATTERY operated tools to avoid electric shocks.
Install step on flat surface, following the manufacturers
instructions.
Remove step from pool during freezing climate season.
Manufacturer cannot be held responsible for injuries caused
by abusive use of product.
Ask your city about specific regulations that apply to your
above-ground pool and ladder.
use small locking
pliers / vice grip
or a wrench 7/16''
Sand
(not included)
Sand
A weather resistant padlock is
recommended. Maximum functional
width is 1/4 inch.
1) Assemble the two main modules with the six screws,
nuts and washers provided.
2) Snap the door between the top and bottom modules
within the slots provided.
3) Snap the 3 post ends into the step making sure that
the cylindrical part is vertical and that the ends are
placed and fitted properly in their respective housings.
4) Snap the filler cap into the bottom step as illustrated.
Contents of the Aquarius box SKU # 5010
Security Strap
http://innovaplas.com
*** Caution : File off all stripped or sharp edges before assembly to avoid injuries and pool damage.
To ease the installation of rails and bolts, use a screwdriver to line up the holes.

E
115-010
x2
x8
115-014 (3/4 IN.)
F
105-005
x2
BC
50 lbs
D
x2
115-018 (2 1/2 in.)
x2
PG. 2
G
x14
115-014
50 lbs
1) Insert the 2 posts into
the rear holes of the step.
2) Force the posts to a
vertical position flush with
the rear surface and
secure in place with the
bolts and nuts provided.
3) Insert the post covers.
1) Slide the Self
Latching posts
through the platform
and small handrails.
2) Secure the
platform using the
screws provided.
3) Secure the small
handrails to the posts
with the screws
provided.
WARNING
LOCK THE DOOR TO THE
STEP WITH A PADLOCK
WHEN THE POOL IS NOT
IN USE TO PREVENT
DROWNING AND
UNAUTHORIZED ENTRY.
1) snaps the 2 feet to th bottom of
the step.
2) Insert the three posts into the post
ends and secure them in place with
the screws provided.
3) Insert the platform over the 2 rear
posts.
4) Insert the small and large
handrails as illustrated. Secure the
large handrails with the screws
provided. Place the small handrails
at the base of the large and secure
them in place with the screws
provided.
Sand
1) Install the four
post covers.
2) Insert a bag of sand
onto surface provided
at the rear of the step.
1) Slowly submerge the
Step in the pool. Make
sure you do not damage
the liner in the process.
Security strap
2) Once the step is in
the pool secure the
platform to the top seat
(see illustration) using
the two straps provided.
OPTIONAL:
Once the pool step has been
completely assembled and secured
to the pool, attach the 2 screws
supplied through the platform to the
top seat of your pool to provide a
more rigid assembly.
35 inch
post
REV. 26/09/14
PN: 110-076
1 Year on the
Self-Latching system
1 year on the hardware
MANUFACTURER
WARRANTY
850 de l’Industrie,
St-Jérome (Québec),
Canada J7Y4B8