Insportline IN 4526 ZEUS User manual

User Manual - EN
IN 4526 Bike inSPORTline ZEUS (SB-530)

Safety information
Important!
1. Class - HC (according to EN ISO 20957) for home use.
2. User weight should not exceed 110.
3. This training apparatus is intended for the standard and commonly practiced art of bike
riding only. Anything other than this is inappropriate
In order to prevent accidents and or injury, please read and follow these simple rules:
Do not allow children to platy in the area of this device, it is not a toy.
Control and tighten all screws, nuts, bolts and the saddle and pedals on a regular basis.
Check your equipment regularly for signs of ware. Replace defective parts immediately. In
the event of any defect, cease usage until fully repaired.
Keep hands and free clear of the chain and crank case in the absence of the housing cover.
Avoid wearing baggy clothing as this may get tangled up in the machinery. Choose only
appropriate trainings clothing.
Do not attempt to ride bare foot. Use only appropriate training shoes.
Do not stand on this device.
Place your home trainer on a solid flat surface for training.
Refrain from training directly before and or after meals.
Before starting any type of fitness training, consult your Doctor.
IMPORTANT!
Do not discard the carton until you have successfully completed the assembly
Please read the instructions carefully before starting
Take and audit of all existing parts that are found inside the carton, match them with the
included parts list.

Scheme

Part list
NO.
DESCRIPTION
SPECIFICATION
Q'TY
1
MAIN FRAME
1
2
REAR STABILIZER
40*97*2.0*498
1
3
REAR STABILIZER CAP
40*97 ABS
4
4
ROUND FOOT
M10*45*50
4
5
HEX HEAD BOLT
M10*60
4
6
WASHER
10*26*2
4
7
WASHER
10*26*2
12
8
NUT CAP
M10
4
9
FRONT STABILIZER
40*97*2.0*498
1
10
PU WHEEL
Φ58*20
2
11
BOLT
8*30*M6
2
12
BOLT
M6*12
2
13
PULLEY AXLE
25*124
1
14
PULLEY
Φ210
1
15
BELT
550EL
1
16
SPRING WASHER
10
4
17
BOLT
10*15
4
18
BEARINGS
6004ZZ SKF
2
19
SPACER
20.1*24*37
1
20
BEARINGS SPACER
Φ38*Φ48*12
2
21
NYLOCK NUT
M20*P1.0
1
22
PLASTIC CAP
42*13
1
23
CRANK L
170 BIKE
1
24
BOLT
8*20
2
25
NUT
17.5*8*M6
2
26
PEDAL L
D10
1
27
CRANK R
170 BIKE
1
28
PEDAL R
D10
1
29
FLYWHEEL
21kg
1
30
BEARINGS
6001ZZ SKF
6
31
BELT WHEEL
1
32
STEEL-PLATE
Φ42.5*4 SPHC
1
33
FLYWHEEL AXLE
14*185 SCM415
1
34
WASHER
12.2*16.6
4
35
NYLOCK NUT
M12*P1.5
6
36
ZIP
19*4
2
37
WASHER
13*20*2
2
38
FLYWHEEL SPACER
12.25*16*11
1
39
CAP
4
40
NUT
M8*P1.25
4
41
BOLT
M8*50*P1.25
2
42
BOLT
M4*10
8

43
BOLT
M8*20
2
44
BUSHING FOR SEAT TUBE
8*92
1
45
HANDLEBAR
1
46
BUSHING
36*93*259
2
47
UPPER UPRIGHT POST
30*60*1
1
48
BOLT
M5*9
1
49
ADJUSTABLE KNOB
2
50
SEAT POST
30*60*1.8*280
1
51
CHAIN COVER L
BIKE 左709*261
1
52
CHAIN COVER R
BIKE右715*269
1
53
FRONT CAP
248*138 ABS
1
54
PROTECT CAP
53.5*118/TPR
2
55
BOLT
5*16
17
56
WASHER
5*10
19
57
WASHER
6*12
4
58
PROTECT CAP FOR MAIN
FRAME
2
59
BEARINGS
608Z
4
60
L-ADJUSTABLE KNOB
2
61
LOWER CAP
4
62
BOLT
5*10
2
63
U-BAR FOR SEAT
1
64
BOLT
4*10
1
65
WASHER
8*19
2
66
BRAKE BOLT
10*133
1
67
BRAKE NUT
16.8*16.8*31
1
68
BOLT
M5*5 DIN
2
69
NUT
M10*P1.5
6
70
NYLOCK NUT
M8
1
71
ROUND STEEL-PLATE
16.8*3
2
72
SPRING
2*16*30
1
73
BOLT
10*101.5
1
74
SPRING
1.5*15*25
1
75
NUT
16.8*16.8*25
1
76
NUT
M8*P1.25
2
77
BRAKE ADJUST PIN
20*30
1
78
NUT
M6
2
79
BOLT
M6*20
2
80
U-TUBE
30*3*66.5
1
81
SPACER
Φ6.2*Φ10*6.2
2
82
FIXED CLIP
25*112
1
83
STRAP
25*7*115
1
84
WASHER
176*59*1.5 PVC
2
85
RUBBER PAD
12*92
1
86
WASHER
Φ8*Φ18*1.0
2

87
WASHER
14*20*0.5
2
88
SEAT
VL3125
1
89
ROLL
3.2*3.2*199
4
90
SPRING
10*10*1.0
2
91
BRAKE KNOB
1
92
NUT
M6
1
93
WASHER
10*26*1.5 不銹鋼
4

Parts:
Hex head bolt 10*60 (5)
4 X 4 X
Nut cap M10 (8)
Plastic washer 10*26*2 (6)
4 X
Flat washer 10*26*2 (7)
4 X
Adjustable knob (60)
1X
1X
14# X15# Screw Driver
1X
M3 Allen wrench
2X
19 # X17# Screw Driver
19

1X
Handle bar (45)
1X
Seat(88)
Main frame (1)
Steel plate (84) Rear stabilizer (2)
Pedal (26&28)
Front stabilizer (9)
2X 1X
1X 1X
1X
1X
Upright post (47) Seat post (50)

19# X17# Screw Driver-2 pcs
step1.
Attached the stabilizer (9&2) to the main frame(1).through the
steel plate (84).and fixed with hex head bolt (5).washer(7)
.plastic washer(6)& nut cap(8).by screw driver.
1
19
19

step 2.
Loosen the adjustable knob(49),a nd insert the upright post(47)
and seat post (50) into main fra me(1),then fixed tightly the
adjustable knob(49).
2

3
14# X15# Screw Driver
step 3.
Attach the pedal (26&28) to the crank (23).and fixed seat(88) to
the seat adjust tuble (63).with screw driver

4
step 4.
Attach the handlebar (45).to the upright post(47).and fixed with
plastic cap (39),bolt (43)& adjustable knob(60).
M3 Allen wrench

TERMS AND CONDITIONS OF WARRANTY, WARRANTY CLAIMS
General Conditions of Warranty and Definition of Terms
All Warranty Conditions stated hereunder determine Warranty Coverage and Warranty Claim Procedure.
Conditions of Warranty and Warranty Claims are governed by Act No. 40/1964 Coll. Civil Code, Act No.
513/1991 Coll., Commercial Code, and Act No. 634/1992 Coll., Consumer Protection Act, as amended, also in
cases that are not specified by these Warranty rules.
The seller is SEVEN SPORT s.r.o. with its registered office in Borivojova Street 35/878, Prague 13000,
Company Registration Number: 26847264, registered in the Trade Register at Regional Court in Prague, Section
C, Insert No. 116888.
According to valid legal regulations it depends whether the Buyer is the End Customer or not.
“The Buyer who is the End Customer” or simply the “End Customer” is the legal entity that does not conclude
and execute the Contract in order to run or promote his own trade or business activities.
“The Buyer who is not the End Customer” is a Businessman that buys Goods or uses services for the purpose of
using the Goods or services for his own business activities. The Buyer conforms to the General Purchase
Agreement and business conditions to the extent specified in the Commercial Code.
These Conditions of Warranty and Warranty Claims are an integral part of every Purchase Agreement made
between the Seller and the Buyer. All Warranty Conditions are valid and binding, unless otherwise specified in
the Purchase Agreement, in the Amendment to this Contract or in another written agreement.
Warranty Conditions
Warranty Period
The Seller provides the Buyer a 24 months Warranty for Goods Quality, unless otherwise specified in the
Certificate of Warranty, Invoice, Bill of Delivery or other documents related to the Goods. The legal warranty
period provided to the Consumer is not affected.
By the Warranty for Goods Quality, the Seller guarantees that the delivered Goods shall be, for a certain period
of time, suitable for regular or contracted use, and that the Goods shall maintain its regular or contracted
features.
The Warranty does not cover defects resulting from:
User’s fault, i.e. product damage caused by unqualified repair work, improper assembly, insufficient insertion of
seat post into frame, insufficient tightening of pedals and cranks
Improper maintenance
Mechanical damages
Regular use (e.g. wearing out of rubber and plastic parts, joints etc.)
Unavoidable event, natural disaster
Adjustments made by unqualified person
Improper maintenance, improper placement, damages caused by low or high temperature, water, inappropriate
pressure, shocks, intentional changes in design or construction etc.
Warranty Claim Procedure

The Buyer is obliged to check the Goods delivered by the Seller immediately after taking the responsibility for
the Goods and its damages, i.e. immediately after its delivery. The Buyer must check the Goods so that he
discovers all the defects that can be discovered by such check.
When making a Warranty Claim the Buyer is obliged, on request of the Seller, to prove the purchase and validity
of the claim by the Invoice or Bill of Delivery that includes the product’s serial number, or eventually by the
documents without the serial number. If the Buyer does not prove the validity of the Warranty Claim by these
documents, the Seller has the right to reject the Warranty Claim.
If the Buyer gives notice of a defect that is not covered by the Warranty (e.g. in the case that the Warranty
Conditions were not fulfilled or in the case of reporting the defect by mistake etc.), the Seller is eligible to
require a compensation for all the costs arising from the repair. The cost shall be calculated according to the
valid price list of services and transport costs.
If the Seller finds out (by testing) that the product is not damaged, the Warranty Claim is not accepted. The
Seller reserves the right to claim a compensation for costs arising from the false Warranty Claim.
In case the Buyer makes a claim about the Goods that is legally covered by the Warranty provided by the Seller,
the Seller shall fix the reported defects by means of repair or by the exchange of the damaged part or product for
a new one. Based on the agreement of the Buyer, the Seller has the right to exchange the defected Goods for a
fully compatible Goods of the same or better technical characteristics. The Seller is entitled to choose the form of
the Warranty Claim Procedures described in this paragraph.
The Seller shall settle the Warranty Claim within 30 days after the delivery of the defective Goods, unless a
longer period has been agreed upon. The day when the repaired or exchanged Goods is handed over to the Buyer
is considered to be the day of the Warranty Claim settlement. When the Seller is not able to settle the Warranty
Claim within the agreed period due to the specific nature of the Goods defect, he and the Buyer shall make an
agreement about an alternative solution. In case such agreement is not made, the Seller is obliged to provide the
Buyer with a financial compensation in the form of a refund.

Date of Sale: Stamp and Signature of
Seller: