Intermec PB50 User manual

PB50
Belt Clip Instructions
The PB50 belt clip makes it easy for you to attach the PB50 printer to your
belt. The belt clip kit contains these parts:
•Beltclipaccessory
• Two Phillips screws
• This instruction sheet
To install the belt clip
1Attach the belt clip to the back of the PB50 with the two Phillips screws.
2Attach the PB50 to your belt with the belt clip.

WorldwideHeadquarters
6001 36th Avenue West
Everett, Washington 98203
U.S.A.
tel [phone]
fax [phone]
www.intermec.com
©
2008 Intermec Technologies
Corporation. All rights reserved.
PB50 BeltClip Instructions
*943-125-003*
P/N 943-125-003