Invacare SOLO 2 User manual

SOLO2™ Quick Reference Guide 1 Part No 1163220
NAVIGATING THE SOLO2™ LCD SCREEN
QUICK REFERENCE GUIDE
NOTE:Thisguideismeanttobeusedonlyasabrief,general
reference.Forcompleteoperatinginstructions,alwaysrefer
totheOperator’sManual.
Turning Concentrator On/Off
NOTE:Forthisprocedure,refertoFIGURE1.1.
1. ToturntheSOLO2concentratoron,pressandholdthe
On/Offbuttonuntilthethreewarninglightsdisplay
andtheunitbeeps.
2. ToturntheSOLO2concentratoroff,pressandholdthe
On/Offbutton.
NOTE:GREENlightwillflashandyouwillhearthemachinestop
running.
FIGURE 1.1 Turning Concentrator On/Off
Menu Screens Navigation
NOTE:Forthisprocedure,refertoFIGURE1.1.
1. Afterturningonunit,pressandholdtheReturn/Highlight
ButtontoscrollthroughthethreeSOLO2concentrator
menuscreens.
NOTE:ScreenswillcontinuescrollinguntiltheReturn/Highlight
Buttonisreleased.
Normal Operating/Standby Screen
TheNormalOperating/Standbyscreenshowseitherbattery
strengthgauge,fanoperating,externalpoweronandbattery
chargingicons,whenapplicable,orthecurrent/lastmodeof
operationandoutputflowlevelselected.
On/Off
Button
Return/Highlight
Button

Part No 1163220 2 SOLO2™ Quick Reference Guide
LCD Adjust Screen
TheLCDAdjustscreenallowsusertochangethebrightness
andcontrastofthescreen(FIGURE1.2).
FIGURE 1.2 LCD Adjust Screen
LCD Adjust Screen Navigation
NOTE:Forthisprocedure,refertoFIGURE1.2.
1. Performoneofthefollowing,whiletheLCDAdjustscreen
isdisplayed:
A. TaptheReturn/HighlightButtontomovetheblack
highlightbarfromlefttoright,orrighttoleft.
B. TaptheUp/IncreaseButtonortheDown/Decrease
Buttonwhiletheblackhighlightbarisonthe
“LEFTSIDE”ofthescreentomovethehighlightbarup
ordown.
C. TaptheUp/IncreaseButtonorDown/Decrease
Buttonwhilethehighlightbarisonthe“RIGHT
SIDE”ofthescreentochangethevalueoftheitem
highlighted.
D. HolddowntheReturn/HighlightButtonto
continuescrollingthroughthethreemenuscreens.
NOTE:Ifnobuttonsarepressedforapproximately10seconds,the
screenwillchangebacktotheStandby/NormalOperatingscreen.
AnychangesmadewillNOTbesaved.
Return/Highlight
Button
Up/Increase
Button
Down/Decrease
Button

SOLO2™ Quick Reference Guide 3 Part No 1163220
2. TosavechangesmadeontheLCDAdjustscreen:
A. PressandholdtheReturn/HighlightButtonuntila
differentscreenappears.
Mode & Flow Adjust Screen
TheMode&FlowAdjustscreenallowsusertochangethe
currentmodeofoperationandoutputflow(FIGURE1.3).
FIGURE 1.3 LCD Adjust Screen
Changing Mode
NOTE:Forthisprocedure,refertoFIGURE1.3.
1. PressandholdtheReturn/HighlightButtonuntilthe
Mode&FlowAdjustscreenappears.
NOTE:Verifythat“MODE”ishighlightedbytheblackhighlight
barbeforeproceeding.
2. TaptheReturn/HighlightButtontomovethehighlight
bartotheright.Thecurrentmode(“CONTINUOUS”or
“PULSE”)shouldnowbehighlighted.
A. If“CONTINUOUS”ishighlighted,pressthe
Down/DecreaseButtontochangethemodeto
“PULSE”.
B. If“PULSE”ishighlighted,presstheUp/Increase
Buttontochangethemodeto“CONTINUOUS”.
3. TosavechangesmadeontheMode&FlowAdjustscreen:
A. PressandholdtheReturn/HighlightButtonuntila
differentscreenappears.
Return/Highlight
Button
Up/Increase
Button
Down/Decrease
Button

Adjusting Flow
NOTE:Forthisprocedure,refertoFIGURE1.3.
1. PressandholdtheReturn/HighlightButtonuntilthe
Mode&FlowAdjustscreenappears.
2. TaptheDown/DecreaseButtontomovethehighlight
bardown.“FLOW”shouldnowbehighlighted.
3. TaptheReturn/HighlightButtontomovethehighlight
bartotheright.Thecurrentflowrateshouldnowbe
highlighted.
4. TapDown/DecreaseButtontodecreaseflow,ortapthe
Up/IncreaseButtontoincreaseflowasneeded.
5. TosavechangesmadeontheMode&FlowAdjustscreen:
A. PressandholdtheReturn/HighlightButtonuntila
differentscreenappears.
*NOTE:Ifnobuttonsarepressedforapproximately10seconds,the
screenwillrevertbacktotheNormalOperating/Standbyscreen,
undoinganyun‐savedchanges.
*NOTE:TheSOLO2concentratorwilldefaulttothelastflowrate
savedforeachmodesetting.
*NOTE:TheLCDAdjustscreenfollowsthesameprinciples
describedabove.
Invacare Corporation www.invacare.com
USA
One Invacare Way
Elyria, Ohio USA
44036-2125
800-333-6900
Technical Services
800-832-4707
All rights reserved. Trademarks are
identified by ™ and ®. All trademarks are
owned by or licensed to Invacare
Corporation or its subsidiaries unless
otherwise noted.
© 2009 Invacare Corporation
Part No 1163220 Rev A - 8/09