Ironwood M2424 User manual

M2424 M3030
CORNER
CONNECTOR
IMPORTANT!
Assembly may require the assistance of
another person.
Before you begin assembly:
READ THE DIRECTIONS all the way through one
time. This will speed up the process and help you
understand the sequence of steps.
COUNT THE PARTS AND HARDWARE before
assembly. This ensures you have received all
necessary parts before you begin.
TOOLS: You may need a Phillips head screwdriver,
a medium slotted screwdriver or a plastic mallet. To
protect your new furniture from damage during
assembly, it is recommended to work on a
carpeted surface.
CAUTION: On assemblies requiring glue, make
sure the unit is assembled correctly before gluing.
Once this unit is assembled with glue, the
manufacturer will not be responsible for damaged
parts. Keep a damp cloth or sponge handy to wipe
off excess glue.
To care for this furniture, simply wipe with a cloth
dampened with glass cleaner containing ammonia-D.
In the event any parts are missing from
this package, send your name, address,
telephone number, and a description of
the missing part(s) to: PARTS, Box 1420,
Missoula, MT 59806 or call:
1-800-769-5693 or FAX [phone].
03/07

PARTS DIAGRAM
A
Left Back
Panel
M2424 02320153
M3030 02320553
1 ea. Top Panel
M2424 02320101
M3030 02320501
1 ea.
C
H1 Minifix Bolt 909834 9 ea.
H5 Leveler Insert 274650 4 ea.
H8 Minifix Cam 909810 9 ea.
H7 Leveler 300870 4 ea.
H2 Wood Dowel 195000 4 ea.
H4 #8 x 3/4"
Panhead Screw 901208 40 ea.
H6 Small Leveler
Bracket 402303 4 ea.
H3 18” Connector
Plate 411270 2 ea.
H9 J-Bracket 411470 2 ea.
B
Right Back
Panel
M2424 02320154
M3030 02320564
1 ea.

Place the Top Panel (C) on a
clean, carpeted surface or
foam padding with the pre-
drilled holes facing up. Using a
screwdriver, screw six Minifix
Bolts (H1) into the Top Panel
where indicated.
Insert four Wood Dowels (H2)
into the Top Panel where
indicated.
#1
H2 H1
ASSEMBLED DISASSEMBLED
Using the Minifix System:
Insert the Minifix Cams into the
appropriate holes with the arrow
facing outwards as shown.
Using the #2 Phillips screwdriver,
rotate the Cam Devices a half turn
clockwise until snug.
To disassemble, turn the Cam
Devices counter-clockwise and
remove panels.
When screwing post into hole, Do
Not over tighten. Screw post down
until bottom face of post flange just
touches board surface.

Insert the Leveler Inserts (H5) and
Leveler Brackets (H6) into the holes in
the bottom edges of Left Back Panel (B)
and Right Back Panel (A) and tap into
place.
Screw the Levelers (H7) into the Leveler
Inserts.
Adjust Levelers when the assembled
unit is in place.
#3
Position the 24” Connector
Plates (H3) on both sides of the
Top Panel (C) as shown. Secure
the 24” Connector Plates in
place using #8 x 3/4” Panhead
Screws (H4) in the pre-drilled
holes of the Top Panel.
#2
H4
H7
H5 H6
Insert Minifix Cams (H8)
into the Left Back Panel (B)
and Right Back Panel (A)
facing out as shown.
Insert three Minifix Bolts
(H1) into the Right Back
Panel (A) as shown.
H1
H8 H1

Attach the Left Back )A) to the
Right Back (B) as shown. Turn the
cams (H8) clockwise to secure.
#4
Position the Back Panels (A & B)
onto the posts and dowels of the Top
Panel (C) and turn the cams (H8)
clockwise to secure.
#5

#6
Attach a “J” Bracket (H9)
to Left Back Panel (B)
and Top Panel (C) using
#8 x 3/4” Panhead
Screws (H4) into the
pre-drilled holes.
Attach a “J” Bracket (H9) to
the Right Back Panel (A) and
the Top Panel (C) using #8 x
3/4” Panhead Screws (H4)
into the pre-drilled holes.
#7

Position the top panel and the
back panel of the desk shell
simultaneously into the “J” Bracket
and onto the Connector Plate of
the corner unit. Slide the back
panel of the desk into the “J”
Bracket of the corner unit. Secure
the desk shell to the corner unit
using #8 x 3/4" Panhead Screws
through the Connector Plate and
into the pre-drilled holes of the
underside of the desk shell top.
CONNECTING TO OTHER UNITS:
Secure the “J” Bracket to
the desk shell using two #8
x 3/4" Panhead
Screws(H4).
Attach the adjoining unit to
the other side of the
Modular Bridge in the
same manner.