Ironwood TCW User manual

0307
TCW
TOWER
COMPUTER
STATION
IMPORTANT!
Assembly may require the assistance of
another person.
Before you begin assembly:
READ THE DIRECTIONS all the way through one
time. This will speed up the process and help you
understand the sequence of steps.
COUNT THE PARTS AND HARDWARE before
assembly. This ensures you have received all
necessary parts before you begin.
TOOLS: You may need a Phillips head screwdriver,
a medium slotted screwdriver or a plastic mallet. To
protect your new furniture from damage during
assembly, it is recommended to work on a
carpeted surface.
CAUTION: On assemblies requiring glue, make
sure the unit is assembled correctly before gluing.
Once this unit is assembled with glue, the
manufacturer will not be responsible for damaged
parts. Keep a damp cloth or sponge handy to wipe
off excess glue.
To care for this furniture, simply wipe with a cloth
dampened with glass cleaner containing ammonia-D.
In the event any parts are missing from
this package, send your name, address,
telephone number, and a description of
the missing part(s) to: PARTS, Box 1420,
Missoula, MT 59806 or call:
1-800-769-5693 or FAX [phone].

PARTS DIAGRAM
Back 05831360 1 ea.
Right Side 05831341 1 ea.
A
B
Monitor Shelf 05831331 1 ea.
Left Side Panel 05831341 1 ea.
I
J
F
G
P
L
K
E
C
D
Bottom 05831311 1 ea.
Keyboard Shelf 05831328 1 ea.
Divider 05831344 1 ea.
Printer Shelf 05831329 1 ea.
Horizontal Panel 05831305 2 ea. Hutch Back 05831357 1 ea.
Hutch Divider 05831345 2 ea.
Hutch Shelf 05831336 1 ea.

H4 #6x5/8”
Panhead Screw 901216 8 ea.
H3 Minifix Bolt 909834 30 ea.
H2 Wood Dowel 195000 24 ea.
H1 Minifix Cam 909810 30 ea.
H8 #14x3/4”
Panhead Screw 901241 20 ea.
H9 #6x5/8”
Flathead Screw 901120 4 ea.
H10 Grommet 286580 1 ea.
H5 CD Rack 286420 2 ea.
H6 Varianta Screw 988060 12 ea.
H7 Caster 402640 5 ea.
Shelf Slide 490260 2 pr. Slide Channel 490260 2 pr.
S3
S4
S1
S2
HARDWARE

Place the Divider (G) on
a clean, carpeted surface
with the pre-drilled holes
facing up. Insert two
Minifix Cams (H1) into
the Divider with the
arrows of the cams facing
out.
#1
G
H1 H1
H1
ASSEMBLED DISASSEMBLED
Using the Minifix System:
Insert the Minifix Cams into the
appropriate holes with the arrow
facing outwards as shown.
Using the #2 Phillips screwdriver,
rotate the Cam Devices a half turn
clockwise until snug.
To disassemble, turn the Cam
Devices counter-clockwise and
remove panels.
When screwing post into hole, Do
Not over tighten. Screw post down
until bottom face of post flange just
touches board surface.
F
H1
H2
Place both Hutch Dividers (F) with
the pre-drilled holes facing up. Insert
two Minifix Cams (H1) into each
Hutch Divider with the arrows of the
cams facing out. Insert two Wood
Dowels (H2) as shown.
#2
H2
H1

Insert two Dowels (H2) and
screw two Minifix bolts (H3)
into each Horizontal Panel
(I) where indicated.
#4
I
H3
H2
#5
I
J
H2
H2
IH1
H1
Insert four Minifix Cams
(H1) into each Horizontal
Panel (I) with the arrows
of the cams facing out.
#3
H2 H3
H1
Insert six Dowels (H2) into the Hutch Back (J) where
indicated. Position the dowels of the Hutch Back into
the pre-drilled holes of a Horizontal Panel (I) as shown
and press into place.
F
F
L
Position the Hutch Shelf
between the Hutch Dividers (F)
as shown and press into place.
#6

J
I
LI
F
H1
J
F
Position the Hutch Divider (F)
and Hutch Shelf (L) assembly
onto the bolts of the Horizontal
Panel (I) as shown. Turn the
cams (H1) of the Hutch Dividers
clockwise to secure in place.
#7
D
H1
Insert four Minifix Cams
(H1) into the Back (D) with
the arrows of the cams
facing out.
#9
H1
Position the bolts of the other
Horizontal Panel (I) into the
corresponding cams of the
Hutch Dividers (F) as shown.
Turn the cams (H1) clockwise to
secure in place.
#8
J
I
LI
F
H1
J
F
I
Insert six Minifix
Cams (H1) into the
Monitor Shelf (C)
with the arrows of
the cams facing out.
#10
CH1
H1
H1

H1 H1
AB
Place the Left Side (A) and Right Side (B)
with the pre-drilled holes facing up. Insert
three Minifix Cams (H1) into each Side (A
& B) with the arrows of the cams facing
out.
#11
H1
Insert two Dowels (H2) each into the Left
Side (A) and the Right Side (B) where
indicated.
#13
AB
H2 H2
AB
H5
Attach a CD Rack (H5) to the Left Side
Panel (A) and Right Side Panel (B)
using #6x5/8” Flathead Screws (H9) as
shown.
NOTE: The nubs on the CD Rack
should face up as indicated.
#12
H2
H9 H5

Screw nine Minifix Bolts (H3)
into the Left Side (A) and the
Right Side (B) where
indicated.
#14
AB
H3
H3 H3
H3
H3
A
S1
Attach the two left Shelf Slides (S1) to the Left Side (A)
using six Varianta Screws (H6) into the pre-drilled holes
where indicated.
#15
S1
FRONT
2ND HOLE
FROM ROLLER
6TH HOLE
FROM ROLLER LAST HOLE
AT END
H6
Attach the two right
Shelf Slides (S2) to the
Right Side (B) and the
Divider (G) using six
Varianta Screws (H6)
into the pre-drilled holes
where indicated.
#16
B
S2
FRONT
S2
2ND HOLE
FROM ROLLER
6TH HOLE
FROM ROLLER
1ST HOLE
FROM END
H6
G
S2
2ND HOLE
FROM ROLLER
6TH HOLE
FROM ROLLER
LAST HOLE
AT END
H6
H6
H6

H1
H1
A
With the aid of an assistant, position the cams of
the Horizontal Panel (I) assembly onto the bolts
and dowels of the Left Side (A) as shown. Turn
the arrows of the cams (H1) clockwise to secure.
#18
Place the Bottom (E) with
the top surface facing up.
Insert six Dowels (H2) and
screw eight Minifix Bolts (H3)
into the Bottom (E) as
shown.
#17
H3
E
H2
H2 H2
H3
H3 H3
#19
A
D
I
I
H1
Position the Back (D) onto the Left Side
(A) as shown and turn the arrows of the
cams (H1) clockwise to secure.
H2

With the help of an assistant, position the bolts and
dowels of the Right Side (B) into the cams of the
Horizontal Panels (I), Back (D), and Monitor Shelf
(C) as shown. Turn the arrows of the cams (H1)
clockwise to secure in place.
H1
A
A
D
C
H1
I
I
Position the Monitor Shelf (C) with the front
edge as shown onto the Left Side (A). Turn
the arrows of the cams (H1) clockwise to
secure.
#20
#22
B
E
A
H1
H1
A
D
C
B
#21
Position the bolts and dowels of the Bottom
(E) into the cams of the Left Side (A) and
Right Side (B) as shown. Turn the arrows of
the cams (H1) clockwise to secure in place.