Ironwood VC-2 User manual

0920
VC-2 / VC-36
VIDEO CABINETS
IMPORTANT!
Assembly may require the assistance of
another person.
Before you begin assembly:
READ THE DIRECTIONS all the way through one
time. This will speed up the process and help you
understand the sequence of steps.
COUNT THE PARTS AND HARDWARE before
assembly. This ensures you have received all
necessary parts before you begin.
TOOLS: You may need a Phillips head screwdriver,
a medium slotted screwdriver or a plastic mallet. To
protect your new furniture from damage during
assembly, it is recommended to work on a carpeted
surface.
CAUTION: On assemblies requiring glue, make
sure the unit is assembled correctly before gluing.
Once this unit is assembled with glue, the
manufacturer will not be responsible for damaged
parts. Keep a damp cloth or sponge handy to wipe
off excess glue.
To care for this furniture, simply wipe with a cloth
dampened with glass cleaner containing ammonia-D.
In the event any parts are missing from
this package, send your name, address,
telephone number, and a description of
the missing part(s) to: PARTS, Box 1420,
Missoula, MT 59806 or call:
1-800-769-5693 or FAX [phone].
VC-36 VC-2

B
D G K
JI
E
A
C
D
PARTS DIAGRAM
B
D G K
JI
E
A
C
D
B
D G K
JI
E
A
C
D
B
D G
K
JI
E
A
C
D
B
D G
K
JI
E
A
C
D
Left Side VC-2
Left Side VC-36
05871641
05871741
1 ea.
1 ea.
B
D G K
JI
E
A
C
D
B
D G K
J
I
E
A
C
D
B
D G K
J
I
E
A
C
D
B
D G K
JI
E
A
C
D
Right Side VC-2
Right Side VC-36
05871641
05871741
1 ea.
1 ea.
Top VC-2
Top VC-36
05871601
05871701
1 ea.
1 ea.
Upper & Lower Back VC-2
Upper & Lower Back VC-36
05871660
05871760
1 ea.
1 ea.
Monitor Shelf VC-2
Monitor Shelf VC-36
05871621
05871721
1 ea.
1 ea.
Adjustable Shelf VC-2
Adjustable Shelf VC-36
05871621
05871721
1 ea.
1 ea.
Bottom VC-2
Bottom VC-36
05871611
05871711
1 ea.
1 ea.
Left Door VC-2
Left Door VC-36
05871673
05871773
1 ea.
1 ea.
Right Door VC-2
Right Door VC-36
05871673
05871773
1 ea.
1 ea.

H5 Varianta
screws 988060 12 ea.
H3 Minifix Bolt 909834 30 ea.
H2 Wood Dowel 195000 20 ea.
H1 Minifix Cam 909810 30 ea.
H4 Hinge H0590 6 ea.
H12 Door Pull 400870 2 ea.
H8 Plate Caster 402640 4 ea.
H9 #14 x 3/4"
Panhead Screws 901241 16 ea.
H14 #6 x 5/8"
Panhead Screws 901216 10 ea.
H11 1" Machine
Screw 920200 4 ea.
H15 #8 x 5/8"
Flathead Screws H2040 54 ea.
H7 #8 x 5/8"
Panhead Screws 988056 4 ea.
H13 Lock & Key Set
452310
452320
452350
1 ea.
H6 Catch Plate 52340 1 ea.
H10 Stop Plate 452330 1 ea.
LOCKSET 250-HP
PARTS DIAGRAM

16" Shelf Slide
(left & right) 490260 2 pr.
16" Side Channel
(left & right) 490260 2 pr.
ASSEMBLED DISASSEMBLED
Using the Minifix System:
Insert the Minifix Cams into the
appropriate holes with the arrow
facing outwards as shown.
Using the #2 Phillips screwdriver,
rotate the Cam Devices a half turn
clockwise until snug.
To disassemble, turn the Cam
Devices counter-clockwise and
remove panels.
When screwing post into hole, Do
Not over tighten. Screw post down
until bottom face of post flange just
touches board surface.
S3
S4
S2
S1
H1
Place the Left Side (A) and Right Side (B) on a clean,
carpeted surface with the pre-drilled holes facing up.
Insert three Minifix Cams (H1) into each Side with the
arrows of the cams facing out.
#1

Screw twelve Minifix Bolts (H3) into the Left Side
(A) and Right Side (B) where indicated.
#3
A B
H3
H3
H3
H3
Insert eight Dowels (H2) into the Left Side (A) and
Right Side (B) where indicated.
#2 H2
H2
A B
H2
H2
H3
H2
#4
With a screwdriver, attach the Hinges (H4)
to the Left Side (A) using the #8 x 5/8"
Flathead Screws (H15) in the pre-drilled
holes. The screws must
be centered in the slots
of the Hinges as shown.
A
H4
H15
H15
H15
H15
H15
H15

LAST HOLE
AT END
6TH HOLE
FROM ROLLER
2ND HOLE
FROM ROLLER
LAST HOLE
AT END
6TH HOLE
FROM ROLLER
2ND HOLE
FROM ROLLER
#5
With a screwdriver, attach the Hinges (H4) to
the Right Side (B) using the #8 x 5/8"
Flathead Screws (H15) in the pre-drilled
holes. The screws must be centered in the
slots of the Hinges as shown.
B
H15
#6
A
S1
Attach the two left Slide Channels (S1) to the Left Side (A) using six Varianta
Screws (H5) into the pre-drilled holes where indicated.
H5
H4
#7
B
S2
H15
H15
H15
H15
H15
H15
H5
Attach two right Slide Channels (S2) to the Right Side (B) using six
Varianta Screws (H5) into the pre-drilled holes where indicated.
H15

#9
#10 Insert six Minifix Cams (H1) into the Top (C), Upper Back (D), and Lower Back (F)
with the arrows of the cams facing out.
Insert four Dowels (H2) into the Bottom (E) where
indicated.
#8
Screw six Minifix bolts (H3) into the Bottom (E) where
indicated.
H2
H3
H1

#13
C
A
H1
H1
H1
FRONT
FRONT
#12
#11
Insert six Minifix Cams (H1) into the Monitor Shelf
(G) with the arrows of the cams facing out.
H1
With the aid of another person, position the cams of the Top (C) onto
the bolts and dowels of the Left Side (A) as shown. Turn the arrows
of the cams (H1) clockwise to secure.
Attach a Catch Plate (H6) to the Monitor Shelf (G)
as shown using two #8x5/8" Panhead Screws (H7).

Position the Lower Back (D) with the finished
(top) edge as shown onto the Left Side (A).
Turn the arrows of the cams (H1) clockwise to
secure in place.
#16
D
AH1
H1
H1
TOP
Position the Monitor Shelf (G) with the front edge
as shown onto the Left Side (A). Turn the arrows of
the cams (H1) clockwise to secure.
#15
G
A
H1
H1
H1
FRONT
#14
Position the Upper Back (D) onto the Left Side (A)
as shown and turn the arrows of the cams (H1)
clockwise to secure.
D
A
H1
H1
H1
TOP
FRONT
FRONT

Attach four Plate Casters (H8) to the Bottom (E) using the
#14x3/4" Panhead Screws (H9) in the pre-drilled holes as
shown.
With the assistance of another person, turn the unit
upright.
#19
Position the bolts and dowels of the Bottom (E)
into the cams of the Sides (A & B) as shown.
Turn the arrows of the cams (H1) clockwise to
secure in place.
#18
E
D
H1
H1
H1
H1
FRONT
#17
With the help of another person, position the bolts
and dowels of the Right Side (B) into the cams of the
Top (C), Upper Back (D), Monitor Shelf (G) and
Lower Back (D) as shown. Turn the arrows of the
cams (H1) clockwise to secure in place.
D
B
CD
G
H1
H1
H1
H1
FRONT