Ironwood GLACIER CDCCR User manual

CDCCR
RISER UNIT
0307
IMPORTANT!
Assembly may require the assistance of
another person.
Before you begin assembly:
READ THE DIRECTIONS all the way through one
time. This will speed up the process and help you
understand the sequence of steps.
COUNT THE PARTS AND HARDWARE before
assembly. This ensures you have received all
necessary parts before you begin.
TOOLS: You may need a Phillips head screwdriver,
a medium slotted screwdriver or a plastic mallet. To
protect your new furniture from damage during
assembly, it is recommended to work on a carpeted
surface.
CAUTION: On assemblies requiring glue, make
sure the unit is assembled correctly before gluing.
Once this unit is assembled with glue, the
manufacturer will not be responsible for damaged
parts. Keep a damp cloth or sponge handy to wipe
off excess glue.
To care for this furniture, simply wipe with a cloth
dampened with glass cleaner containing ammonia-D.
In the event any parts are missing from
this package, send your name, address,
telephone number, and a description of
the missing part(s) to: PARTS, Box 1420,
Missoula, MT 59806 or call:
1-800-769-5693 or FAX [phone].
BY

PARTS DIAGRAM
A
D
Left Side 01050941 1 ea.
E
Top 01050901 1 ea.
Right Side 01050941 1 ea.
Left Back 01050955 1 ea.
Right Back 01050954 1 ea.
C
B

H3 Dowel 195000 10 ea.
H2 Minifix Bolt 909834 16 ea.
H1 Minifix Cam 909810 16 ea.
MBD DMBD
Using the Minifix System:
net te Minifix Cam into te
aoiate ole wit te aow
fain otwa a own.
in te 2 illi ewie
otate te Cam Deie a alf tn
lowie ntil n.
o iaemle tn te Cam
Deie ontelowie an
emoe anel.
en ewin ot into oleDo
Not oe titen. ew ot own
ntil ottom fae of ot flane t
toe oa fae.
HARDWARE

Insert four Minifix Cams (H1) and
screw four Minifix Bolts (H2) into the
Top Panel (C) as shown.
#1
H2
H2
H1
H1
C

B
H
H
H
H2
H
H
H
H2
T I

IHT I
#2
Tap in four Wood Dowels (H3) and
screw four Minifix Bolts (H2) into
each Side Panel (A & B) as shown.

#3
#4
DE
H1
H1
H1 H1
H1
DE
H1
Insert Minifix Cams (H1)
into each Back Panel
(D,E) 12 ea. as shown,
making sure the arrow
faces out toward the edge
of the panel.
Attach the Right Back (D)
to the Left Back (E). Turn
the Minifix Cam (H1)
clockwise to tighten.
#5
C
E
D
Attach Back Panels to
the Top Panel.

C
A
E
D
Attach the Left Side
(A) as shown. Turn
the Minifix Cams (H1)
clockwise to tighten.
#6
C

A


Attach the Right Side
(B) as shown. Turn the
Minifix Cams (H1)
clockwise to tighten.
#7
The installation of your
Glacier Corner Riser Unit
is now complete and
ready to use.
#8