Ironwood Glacier LFPD User manual

0620
LIBRARY FURNITURE
LFPD
PAPERBACK
DISPLAY
IMPORTANT!
Assembly may require the assistance of
another person.
Before you begin assembly:
READ THE DIRECTIONS all the way through one
time. This will speed up the process and help you
understand the sequence of steps.
COUNT THE PARTS AND HARDWARE before
assembly. This ensures you have received all
necessary parts before you begin.
TOOLS: You may need a Phillips head screwdriver,
a medium slotted screwdriver or a plastic mallet. To
protect your new furniture from damage during
assembly, it is recommended to work on a carpeted
surface.
CAUTION: On assemblies requiring glue, make
sure the unit is assembled correctly before gluing.
Once this unit is assembled with glue, the
manufacturer will not be responsible for damaged
parts. Keep a damp cloth or sponge handy to wipe
off excess glue.
To care for this furniture, simply wipe with a cloth
dampened with glass cleaner containing ammonia-D.
In the event any parts are missing from
this package, send your name, address,
telephone number, and a description of
the missing part(s) to: PARTS, Box 1420,
Missoula, MT 59806 or call:
1-800-769-5693 or FAX [phone].
BY

Left Panel 07010742 1 ea.
A
BRight Panel 07010742 1 ea.
Toeboard 07010772 1 ea.
C
Sloped Back 07010755 1 ea.
Back
Spanner 07010760 1 ea.
E
Fixed/Adj.
Shelf 07010724 5 ea.
F
PARTS DIAGRAM
Rafix Bolt 909925 22 ea.
H3
Rafix Flush
Cam 909911 18 ea.
H2
PARTS DIAGRAM
D
H4 Rafix Cam 909909 20 - ea.
H6
Rafix Shelf
Pin 909924 16 ea.
H5

#1
A
B
H3
H3
H3 H3
H3
H3
H3
H3
H3
H3
Screw in Rafix Bolts (H3) into corresponding holes.
H3
ASSEMBLE DISASSEMBLE
Using the Rafix System:
Insert the Rafix Cams into the
appropriate holes. The flat edge of
the cam should be facing the edge
of the panel.
Slide Rafix Cams of the panel to be
attached onto the corresponding posts.
Using a #3 Phillips screwdriver, turn the
rotating portion of the Rafix Cam a 1/2
turn clockwise to secure. IMPORTANT!
Do not exceed 1/2 turn when tightening
cams. Turn 1/2 turn counterclockwise
to disassemble and remove panel.
When screwing post
into hole, Do Not
over tighten. Screw
post down until
bottom face of post
flange just touches
board surface.
Flat
edges
must be
aligned

C
H2
#2 Insert Rafix Flush Cams(H2).
#3
D
H2
H2
H2
H2
H2
H2 H2
H2
H2
H2
Insert Rafix Flush Cams (H2).
H2
#4
E
H2
H2 H2
H2
Insert Rafix Flush Cams (H2).
H2
H2

F
H4
H4
#5
#6
#7
D
C
B
H2
H2
H2
H2
H2
Insert Rafix Cams(H4).
Attach Toeboard (C) to Right Panel (B) and
secure by turning Rafix Flush Cam (H2).
Attach Sloped Back Panel (D) to Right Side
Panel (B) Secure by turning Rafix Flush Cam
(H2).
C
B
H2
H4
H6

#8
D
E
C
B
H3
H3
#9
Attach Back Spanner (E) to Right Side Panel (B).
Secure by turning Rafix Flush Cam(H2).
Attach Left Panel (A) to Sloped Back Panel (D),
Toeboard (C) and Back Spanner (E). Secure by
turning Rafix Flush Cam (H2).
#10 Attach fixed shelf (F) to Left/
RIght Panel (A/B). Secure by
turning screw in Rafix Cam
(H4). A
C
B
F
C
E
H6
H4
H4
H6
H6
H6
TURN SCREW
TO SECURE

#11 Screw in Rafix bolt(H3) and
attached fixed shelf.
F
H3
H3
#12 Push in rafix bolt(H5) for
remaining adjustable
shelves
Assembly is Complete
H3
H3