Ironwood Glacier LS42SB User manual

0709
LIBRARY SHELVING UNIT
LS42SB LS48SB
LS60SB LS72SB
LS84SB
SINGLE
BASE UNIT
BY
IMPORTANT!
Assembly may require the assistance of
another person.
Before you begin assembly:
READ THE DIRECTIONS all the way through one
time. This will speed up the process and help you
understand the sequence of steps.
COUNT THE PARTS AND HARDWARE before
assembly. This ensures you have received all
necessary parts before you begin.
TOOLS: You may need a Phillips head screwdriver,
a medium slotted screwdriver or a plastic mallet. To
protect your new furniture from damage during
assembly, it is recommended to work on a
carpeted surface.
CAUTION: On assemblies requiring glue, make
sure the unit is assembled correctly before gluing.
Once this unit is assembled with glue, the
manufacturer will not be responsible for damaged
parts. Keep a damp cloth or sponge handy to wipe
off excess glue.
To care for this furniture, simply wipe with a cloth
dampened with glass cleaner containing ammonia-D.
In the event any parts are missing from
this package, send your name, address,
telephone number, and a description of
the missing part(s) to: PARTS, Box 1420,
Missoula, MT 59806 or call:
1-800-769-5693 or FAX [phone].

PARTS DIAGRAM
AB
CE
Right Side - LS42SB
Right Side - LS48SB
Right Side - LS60SB
Right Side - LS72SB
Right Side - LS84SB
01200141
01200241
01200341
01200441
01200541
1 ea.
1 ea.
1 ea.
1 ea.
1 ea.
Left Side - LS42SB
Left Side - LS48SB
Left Side - LS60SB
Left Side - LS72SB
Left Side - LS84SB
01200141
01200241
01200341
01200441
01200541
1 ea.
1 ea.
1 ea.
1 ea.
1 ea.
Top 01200101 1 ea.
LS42SB - 3 ea.
LS48SB - 3 ea.
LS60SB - 4 ea.
LS72SB - 5 ea.
LS84SB - 6 ea.
412226
H2 Book Stop
H5 Varianta Bolt 988060 8 ea.
LS42SB - 25 ea.
LS48SB - 25 ea.
LS60SB - 30 ea.
LS72SB - 35 ea.
LS84SB - 40 ea.
988056
H3 # 8 x 5/8"
Panhead
Screw
H6 Metal Frame 412026 1 ea.
Fixed/
Adjustable
Shelf 01200124
3 ea.
3 ea.
4 ea.
5 ea.
6 ea.
LS42SB
LS48SB
LS60SB
LS72SB
LS84SB
LS42SB - 8 ea.
LS48SB - 8 ea.
LS60SB - 12 ea.
LS72SB - 16 ea.
LS84SB - 20 ea.
909932
H7 Tab-V Metal
Shelf Clip
H4 Tab-V Metal
Flange 909931 8 ea.
LS42SB - 16 ea.
LS48SB - 16 ea.
LS60SB - 20 ea.
LS72SB - 24 ea.
LS84SB - 28 ea.
909930
H1 Tab-V
Plastic
Housing
HARDWARE

it is important to read all the way through the Adder instructions
(enclosed in the Adder carton) before beginning. It will be necessary
to substitute a Divider (J) for a Right Side (B) during assembly.
NOTE:
The diagrams show one size for ease of viewing.
Any differences will be indicated in each step
’ s text.
If you have purchased an Adder unit
to be assembled in conjunction with this Base unit,
it is important to read through the Back option
and/or Toe Space option directions before beginning.
If you have purchased the Back option or the Toe Space option
to be assembled in conjunction with this Base unit,

Using a plastic mallet, tap in the
plastic housings with the flat
edge facing outwards until flush
with the surface.
IMPORTANT! The flat
edge of the plastic
housing must be
aligned with the shelf
edge. Plastic Housings
cannot be repositioned
once installed.
For a Fixed Shelf or Top,
install the metal flange using a
System (Varianta) Screw as
shown. DO NOT over tighten!
For an Adjustable Shelf, use
the Metal Shelf Clip.
Slide the shelf into place over
the Metal Flanges and push
down until fully seated.
Turn the rotating portion (Cam)
1/2 turn to lock in place.
To remove, simply turn the
Cam counter clockwise 1/2
turn and lift the shelf off of the
Metal Flanges.
ALIGNED
FLAT
EDGE
USING THE TAB-V SYSTEM:
ADJUSTABLE
FIXED

#1
#2
Install four Plastic Housings
(H1) into each shelf. Attach a
Book Stop (H2) to each
Fixed/Adjustable Shelf (E)
using five Panhead Screws
(H3) in the pre-drilled holes.
H2
H3
E
H1
H1
Install four Plastic
Housings (H1) into the
Top Panel (C) as shown. C
H1
H1
H1
H1
H1
#3 Place both Sides (A & B) on a clean, carpeted surface as shown.
Install Metal Flanges (H4) using Varianta Screws (H5) in each Side
Panel into the selected pre-drilled holes as indicated.
A
B
H4/H5 H4/H5
H4/H5
H4/H5
TOP SET OF HOLES
FOURTH SET OF HOLES FROM BOTTOM TOP SET OF HOLES
FOURTH SET OF HOLES FROM BOTTOM
FRONT
FRONT
TOP
H4
H5

METAL FRAME 3/4" BACK
H6
H3
#4 Attach a Metal Frame (H6) or Back Panel (D).
#5
BA
METAL FRAME 3/4" BACK
H3
H8
With the assistance of another person, stand the assembly upright and
install the other side panel (B).
H3
Use five #8 x 5/8"
Panhead Screws (H3). Follow the instructions included
with the Back Panel.
Use five #8 x 5/8"
Panhead Screws. Turn Rafix Cams (H8) 1/2 turn
clockwise to tighten.
NOTE: If you are installing an Adder, follow the instructions for an Adder unit at this time.

C
E
C
E
METAL FRAME 3/4" BACK
#6 Attach the Top Panel (C) and the Fixed Shelf (E) using the Tab-V System.
Turn the Cams 1/2 turn to tighten.
Insert shelf pins (H7) at desired shelf
heights. Place the Adjusting Shelves (E)
in the unit.
Review the instructions for installing
shelves, “Using the Tab-V System”
on the 4th page of these
instructions.
NOTE: If you are installing the Toe Space option, it is recommended to install the Toe
Space at this time. Follow the directions included with the Toe Space option.
FINISHED
EDGE
G
G
H6
H6
#7
H7
H7

#8 Your Glacier Library Shelving Unit is now assembled and ready for use.