IWILL mp4s Original operating instructions

1
mP4S Version 1.0A
Table of Content
FB11462000000
Quick Installation ....................................................... .3
Before Installation........................................................................3
Layout...........................................................................................4
Item Checklist.......................................................................4
Jumpers/ Connectors..................................................................5
Feature ....................................................................... 10
Motherboard Components Placement......................................10
Block Diagram..............................................................................12
Specifications..............................................................................13
Hardware Setup......................................................... 15
Install the Processor...................................................................15
Install Memory Modules..............................................................17
ATX Power Supply Connector....................................................18
Back Panel...................................................................................19

Chapter 1 Quick Installation
2
BIOS Setup ................................................................ 20
BIOS Setup.................................................................................20
Main Menu...................................................................................22
Standard CMOS Features..........................................................22
Advanced BIOS Features ...........................................................26
Advanced Chipset Features........................................................29
Integrated Peripherals...............................................................31
Power Management Setup..........................................................36
PnP/ PCI Configurations.............................................................40
PC Health Status.........................................................................42
IWILL Smart Setting....................................................................42
Load Fail Safe Defaults..............................................................44
Load Optimized Defaults............................................................44
Set Supervisor/ User Password Setting....................................45
Save & Exit Setup.......................................................................46
Exit Without Saving....................................................................46
On board Audio ......................................................... 47
Audio Features............................................................................47
IWILL 6ChannelsAudio/SuperAudio(Optional)..........................49
Driver Installation.......................................................................51
The Audio Rack..........................................................................53

3
Chapter 1 Quick Installation
Quick Installation
Before Installation
For installation, you may need some or all of the following tools:
Medium size flat blade screwdriver
Medium size Phillips head screwdriver
A 3/16 inch nut driver or wrench
ehterusneotsenilediugesehtwolloftsumsresU .noitallatsnigniruddetcetorpsidraobrehtom
.ffo-derewopsiretupmocruoyerusekaM.1
,tnempiuqecinortcelerehtollaekil,draobrehtomehT.2 snoituacerpreporpehtekatesaelP.citatsotevitisnessi agnihcuotybflesruoydnuorg,elbissopfI.tignildnahnehw evitcudnocstinidraobehtpeek.ksedroelbatlatem nidellatsniebotydaerdnaderugifnocsitilitnugnipparw .metsysruoy
yppolfdnadrahruoyhtobmorfyawastengamllapeeK.3 htobpeeK.srevirdwercscitengamyllaicepse,sevirdksid .debmessasidfitrapasksiddrahdnayppolf
stidnaretupmocruoymorfyawasdiuqildnaretawpeeK.4 .stnenopmoc

Chapter 1 Quick Installation
4
Item Checklist
[ V ] The motherboard
[ V ] I/O shield
[ V ] Operation manual
[ V ] ATA 100/66 IDE cable
[ V ] Floppy cable
[ V ] Power Installer CD
[ V ] 6CHG(6 channel audio bracket)
[ V ] 6CH1394 (1394 bracket, mP4S-1394 only)
Optional
[ ] USB riser kit
[ ] IWILL Super Audio (for SPDIF)
Layout
intel
IEEE1394
Controllor
Ethernet
Controllor
mP4S
mPGA478B

5
Chapter 1 Quick Installation
Jumpers/Connectors
PS2_SB
Clear CMOS
Flash Protect jumper
Disabled
(Default) Enabled
Clear CMOS
Flashable Protected by H/WControl by BIOS
(Default)
Normal
(Default)
Ethernet
Controllor
mPGA478B
Ethernet
Controllor
mPGA478B
Audio Jumper
LAN Setting
Case Open
Disabled
Disabled
Enabled
(Default)
Enabled
(Default)
123
123
123
123

Chapter 1 Quick Installation
6
Ethernet
Controllor
mPGA478B
CPU Fan
Auxiliary Fan
System Fan
PINAssignment
1: GND
2: 12V
3: Sensor
1
2
3
Ethernet
Controllor
mPGA478B
Infrared connector (IR)
Internal USB connector
SMBus connector
PINAssignment
1: SMBUSCLK
2: NC
3: GND
4: SMBDATA
5: VCC
PINAssignment
1: 5V 6: NC
2: NC 7: CIRRX
3: IRRX 8: 5VSB
4: GND 9: NC
5: IRTX 10: NC
PINAssignment
1: 5V 6: 5V
2: USBDT2- 7: USBDT3-
3: USBDT2+ 8: USBDT3+
4: GND 9: GND
5: GND 10: NC
1
2
3
4
5
1
678910
2345
1
678910
2345

7
Chapter 1 Quick Installation
Ethernet
Controllor
mPGA478B
Aux_In/ CD_In Connector
SPDIF & IWILL 6CH bracket
PINAssignment
1: +12V 2:NC
3: NC 4: SPDIFO
5: SPDIFI 6: GND
7: NC 8: SPGPIO
9: NC 10: NC
11: BASS 12: XREARR
13: GND 14: GND
15: CENTER 16: XREARL
PINAssignment
1: Left Channel
2: GND
3: GND
4: Right Channel
1234
SPDIF 6CH
1
6
7
8
9
10
11
12
13
14
15
162
3
4
5
Ethernet
Controllor
mPGA478B
1
2
3
4
5
6
1
2
3
4
AT-PWR connector
ATX12V connector
PINAssignment
1: GND
2: GND
3: GND
4: 3.3V
5: 3.3V
6: 5V
PINAssignment
1: GND
2: GND
3: 12V
4: 12V

Chapter 1 Quick Installation
8
.oNNIPnoitinifeDoNNIPnoitinifeD
1V3.3+11V3.3+
2V3.3+21V21-
3dnuorG31dnuorG
4V5+41nOylppuSrewoP
5dnuorG51dnuorG
6V5+61dnuorG
7dnuorG71dnuorG
8dooGrewoP81V5-
9V5+91V5+
01V21+02V5+
ATX power connector
Ethernet
Controllor
mPGA478B
ATX connector
1
10
11
20

9
Chapter 1 Quick Installation
noitcnuF.ONNIPnoitinifeD
NO_RWP )ffO_tfoS/rewoP( 31,1
)DELIPCA(IPCA4,3 edonA:3NIP edohtaC:4NIP
)DELEDI(DELA8,7 edonA:7NIP edohtaC:8NIP
)TESER(TSR21,11 TSR:11NIP DNG:21NIP
DELP )DELrewoPmetsyS( 71,61,51 CCV:51NIP CN:61NIP DNG:71NIP
LK )kcoLdrarobyeK( 91,81 LK:81NIP DNG:91NIP
)rekaepS(RKPS42,32,22,12
CCV:12NIP CN:22NIP CN:32NIP KAEPS:42NIP )ZZUB(
Front panel connectorFront panel connector
Front panel connectorFront panel connector
Front panel connector
Ethernet
Controllor
mPGA478B
Front Panel
1
24
13
12

10
Chapter2 Feature
Features
Motherboard Components Placement
intel
IEEE 1394 Controllor
Ethernet Controllor
mP4S
mPGA478B
12 3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
4

11
Chapter2 Feature
[
.ONnoitpircseD
1)niP874(tekcoSUPC
2tespihc548i
3stekcosMMID
4V21XTA/rewoPTA/rotcennocrewoPXTA
5rotcennocCDF
6rotcennocEDI
72HCIletnItespihc
8HWFSOIBelbammargorproftespihc
9stolsICP
01IMCpihcdnuos
11tolsPGA
21enohporciM,tuOeniL,nIeniL
31troPlellaraP
411MOC
512MOC
61BSU
71draobyeK/esuoM2SP

12
Chapter2 Feature
Block Diagram
AGP4X SDRAM
IDE Channel x 2
Socket 478 CPU
Super I/O
i845 Chipset
(North Bridge)
ICH2 82801BA
(South Bridge)
PCI x2
6 Channel sound
H/WMonitoring Serial Port x2
Infrared Port
Parallel Port
FDC
2xUSB Ports
Internal USBx2 Keyboard & Mouse
SMBus

13
Chapter2 Feature
Specifications
Processor / (Socket478)
Supports single processor
Supports 400M FSB ( Front Side Bus)
Supports Intel Pentium 4 CPU from 1.4 to 2.0 GHz and higher.
CPU Frequency/Voltage Selection
Supports CPU Multiplier selection from BIOS
Supports CPU External Frequency selection from BIOS
Memory
Supports PC100/PC133 SDRAM
Supports ECC DIMMs
(Single bit error Correction, Multiple bit error Detection)
Supports 16M/64M/128M/256M/512M DRAM technology
System memory maximum up to 3GB
Supports DIMM type 64Mb/128Mb/256MB
Graphics
Supports AGP 4X 1.5V ONLY
General I/O
PCI 2.1/2.2 compliance
Supports 32-bit/33MHz PCI interface
Supports LPC interface
Supports ATA33/ATA66/ATA100 IDE interface
Supports floppy interface
Supports 16550A UART interface
Supports ECP/EPP interface
Supports PS2 interface
Supports SIR/FIR/CIR interface
Supports USB interface
Sound support
C-Media 8738 HW Sound controller
Supports 6 Channel
Supports Game/MIDI interface
Supports Win9X/ WinNT/ Win2000/ Linux/ Net Ware.

14
Chapter2 Feature
Management
Supports voltage monitoring
(+12V/-12V/+5V/-5V/Vcore/Vcore2/VTT/VIO/Vbat/Vsb)
Supports fan control signal (CPU/AUX/SYS1)
Supports temperature sensor (CPU/AUX/SYS)
Supports Chassis Intrusion
Supports Power on by LAN/Ext. Modem/Int. Modem/PS2 Keyboard/
PS2 Mouse/RTC/PME
Supports Resume by LAN/Ext. Modem/Int. Modem/PS2 Keyboard/
PS2 Mouse/RTC/PME
Supports ACPI
Supports APM
Supports DMI
Supports SMBUS
Supports PnP
Supports BIOS ROM Flash Control
(3-pin jumper provide H/W & S/W protection)
Supports “AC-Loss Recovery”
Supports Manually Assign PCI IRQ
Supports PS2 mouse and PS2 keyboard auto swapping
Power requirement
Onboard DC/DC switching voltage regulator supports VIO up to 10A
current
Discrete voltage regulator for AGP port
Supports adjustable VIO (Normal/Increase 5%/Increase 10%,
Normal=3.4V, jumper/BIOS)
Supports 150A//us Icc slew rate
Expansion Slot, Sockets and Connectors
One Socket478 socket
Three DIMM sockets
One AGP 1.5V AGP slots
Two 32bit/33MHz Bus Master PCI slots
Two IDE connectors
One FDC connector
One Internal USBx2 connectors
One ATX 20-pin power connector
One ATX 4-pin power connector (ATX 12v for Vcore)
One AT 6-pin power connector

15
Chapter 3 Hardware Setup
Intel Pentium 4 Processor Installation Procedure
The motherboard comes with a surface mount 478-pin ZIF socket.
This socket is specifically designed for Intel Pentium 4 478
processor.
Hardware Setup
Install the processor retention mechanism following the illustration.
A. Open thesocket handle.
B. Install the processor by carefully aligning the pins to the socket
C. Close the socket handle
Unlock the socket by pressing the
lever sideways, then lift it up to a
vertical angle
Position the CPU above the socket
such that its marked corner matches
the base of the socket lever.
Press it firmly on the socket while you
push down the socket lever to secure
the CPU.

16
Chapter 3 Hardware Setup
CPU Cooler and heatsink Installation Notes
The Intel Pentium 4 processor requires a specially designed heatsink and
fan assembly to ensure optimum thermal condition and performance.
mPGA478B
Theheatsink may havethermal interfacematerial attached to thebottom as shown in
Fig. 1. (Be careful not to damage the thermal interface material.) If not, use the enclosed
syringe andapply all of thethermal interface material to the top of theprocessor as
shown in Fig.2.
Connection the CPU fan cable
When the fan, heatsink and the retention mechanism are in place,
connect the CPU fan cable to the conner on the fan connector.
Ethernet
Controllor
mPGA478B

17
Chapter 3 Hardware Setup
Install Memory Modules
IWILL mP4S comes with PC133 memory module (DIMM) sockets. These
sockets support up to 3GB system memory using unbuffered ECC or
non-ECC PC133 memory.
Make sure to unplug the power supply before adding or removing
memory module. Failure to do so may cause damage to
motherboard.Follow these steps to install memory modules.
A
li
g
n the "Notch" on the DIMM memor
y
to
the"Break"ontheSocket.
Firml
y
insert the DIMM into the socket until
theretaining clips snap back in placeand
theDIMMis properlyseated.
Makesurethememoryislockedonthe
DIMM socket with "Both Chips"
Step: 3 Step: 4
Unlock a DIMM socket by pressing the
retaining clips outward.
Step:
1
Step: 2
Notch
Breaks

18
Chapter 3 Hardware Setup
ATX Power Supply Connector
PETSnoitpircseD
1esacmetsysehtesolc,edamerasnoitcennocllaretfA .revo
2.ffoerasehctiwsllatahteruseB
3detacolylpppusrewopehtotnidrocrewopehttcennoC .esacmetsysruoyfokcabehtno
4deppiuqesitahtteltuorewopadrocrewopehttcennoC .rotcetorpegrusahtiw
5aybV022/V011troppusylppusrewopehtfoynaM tcerrocehtotylppusrewopruoyhctiwS.gnitteshctiws .egatlovylppus
6
redrogniwollofehtnimetsysruoynonruT rotinomehT.a .secivedlanretxeehT.b .metsysretupmocehT.c
Power on procedures
lliwsissahcehtfolenaptnorfehtnoDELrewopehT -rewopnurnehtlliwmetsyseht,sdnoceswefretfA.thgil ehtnoraeppalliwsegassemlanoitiddaemoS.stsetno nihtiwgnihtynaeestonoduoyfI.tsetehtgnirudneercs eht,rewopehtnonrutuoyemitehtmorfsdnoces03 ehtkcehceR.tsetno-rewopadeliafevahyammetsys rofreliaterruoyllacrosnoitcennocdnasgnittesrepmuj .ecnatsissa

19
Chapter 3 Hardware Setup
6 Channel, Firewire 1394 and SPDIF Modules
6CH1394 6CHaudio +Game/Midi port, Firewire ( ) mP4S-1394 only
6CH1394
6CHG 6CHaudio+ Game/Midi port ( ) mP4S only
6CHG
SuperAudio 6CHaudio+SPDIF( ) Optional

20
Chapter 4 BIOS Setup
BIOS Setup
Upgrade BIOS
The BIOS can be upgraded from a diskette with theAward Flash
utility — AWDFLASH.EXE. The BIOS image file, and update utility
are available from IWILL’s WEB site: support.iwill.net
Enter BIOS setup program
Power-on the system by either pressing the Power-On button, or
by using any of the power-on features provided by the
motherboard. Then, press the <Del> key after the Power-On Self
Test (POST), and before the scanning of IDE devices. Simply look
for the message “Press DEL to enter SETUP” displayed at the
bottom of the screen during the boot up process. If the message
disappears before you’ve had a chance to respond, you can restart
the system byturning off the system power then turn it on again,
orPressing the “RESET” button on the system case, or
Pressing <Ctrl>, <Alt> and <Del> keys simultaneously.
ylluferacneebevahsgnittestluafedSOIBeht,yllareneG etulosbaehtedivorpsreenignEs'LLIWIybnesohc yrevsitI.ytilibailerdnaecnamrofrepmumixam lluftuohtiwgnittesynaegnahcotsuoregnad .uoytahtdnemmocerylgnortseW.gnidnatsrednu .yltcefrepskrowmetsysehtfiSOIBetadpuTONOD yllufuoysselnugnittesynaegnahcTONOD .snaemtitahwdnatsrednu
BIOS Setup