IWILL DN800-SATA User manual

IWILL
DN800-SATA/DN800-L
Motherboard
User’s Manual
Overview Hardware Installation BIOS Setup
FB25633000

DN800-SATA/-LMotherboard IWILL
2 IWILL DN800-SATA/-L Series

IWILL DN800-SATA/-L Series 3
Disclaimer
The manufacturer makes no representations or warranties regarding the contents of this manual
and specifically disclaims any implied warranties of merchantability or fitness for any particular
purpose. Furthermore, the manufacturer reserves the right to revise this publication or make
changes in the specifications of the product described within it at any time without notice and
without obligation to notify any person of such revision or change.
Trademarks
Microsoft and Windows are registered trademarks of Microsoft Corp. Intel and Xeon are
registered trademarks of Intel Corporation. Other product names used in this manual are the
properties of their respective owners and are acknowledged.
Copyright
This publication, including all photographs, illustrations and software, is protected under
international copyright laws, with all rights reserved. Neither this manual, nor any of the material
contained here in, may be reproduced without the express written consent of the manufacturer.
IWILL ©Copyright 2004
All produce specs are subject to change without prior notice. The actual specs will be
according to the actual product.
IWILL User’s Manual

DN800-SATA/-LMotherboard IWILL
4 IWILL DN800-SATA/-L Series
Table of Contents
CHAPTER 1 OVERVIEW...........................................................................................................................6
DN800-SATA/DN800-L PACKAGE CONTENT.............................................................................................7
SAFETY NOTICE...........................................................................................................................................8
GETTING HELP ..........................................................................................................................................10
DN800-SATA/DN800-L SPECIFICATIONS.................................................................................................11
CHAPTER 2 COMPONENTS AND JUMPER SETTING......................................................................13
MOTHERBOARD LAYOUT:..........................................................................................................................14
COMPONENTS LIST ....................................................................................................................................15
JUMPER SETTING .......................................................................................................................................16
JP1: Clear CMOS Header...................................................................................................................16
JP3; JB3A: FSB Jumper ......................................................................................................................17
JP16: BIOS Protection Jumper............................................................................................................17
J42 Case Open Pin Header..................................................................................................................17
J57: Front Audio Jumper.....................................................................................................................18
REAR PANEL I/O PORTS.............................................................................................................................19
ADDITIONAL I/O CONNECTORS .................................................................................................................21
J32: COM2 Header..............................................................................................................................21
J43: Front Panel Switch Header..........................................................................................................21
J45: IrDA Connector ...........................................................................................................................23
J46: Color Connector ..........................................................................................................................24
J48: SMBus Connector ........................................................................................................................24
SERIALATA CONNECTOR..........................................................................................................................25
USB HEADER ............................................................................................................................................27
J60A, J60B: IEEE 1394 (FIREWIRE) HEADER..........................................................................................28
DN800-SATA/-L POWER SUPPLY..............................................................................................................29
IDEAND FLOPPY CONNECTORS ................................................................................................................30
CHAPTER 3 HARDWARE INSTALLATION.........................................................................................32
MOTHERBOARD INSTALLATION .................................................................................................................33
INSTALLING THE CPUAND HEATSINK PROCEDURES..................................................................................34
MEMORY INSTALLATION PROCEDURE........................................................................................................41
INSTALLING EXPANSION CARDS ................................................................................................................43
POWERING ON YOUR SYSTEM....................................................................................................................45

IWILL DN800-SATA/-L Series 5
CHAPTER 4 BIOS SETUP ........................................................................................................................46
BIOS SETUP..............................................................................................................................................47
USING THE BIOS SETUP UTILITY..............................................................................................................49
MAIN MENU ..............................................................................................................................................51
ADVANCED MENU .....................................................................................................................................52
BOOT MENU ..............................................................................................................................................53
BOOT SETTING CONFIGURATION SUBMENU...............................................................................................54
EXIT MENU................................................................................................................................................56
CHAPTER 5 OS AND DRIVERS INSTALLATION ...............................................................................57
OS INSTALLATION .....................................................................................................................................58
DRIVERS INSTALLATION ............................................................................................................................59
IWILL User’s Manual

DN800-SATA/-LMotherboard IWILL
6 IWILL DN800-SATA/-L Series
Chapter 1 Overview

IWILL DN800-SATA/-L Series 7
DN800-SATA/DN800-L Package Content
1. DN800-SATA/DN800-L Motherboard
 Professional workstation system board
2. Three jumper caps
 Extra caps in case original caps get lost
3. One Power Installation CD
 Includes support software, drivers and bundled software utilities.
4. Rear panel I/O shield
 Covers the area around the rear panel I/O ports when the board is installed in a
system housing.
5. Two sets of SATA cables
 Connector cable for onboard SATA connectors. (DN800-L only one set)
6. Two ATA-66/100 IDE cables
 Connects IDE devices to one of the onboard IDE connectors.
7. One floppy disk drive cable
 Connects floppy disk drives to the onboard floppy disk connector.
8. Two Hat Springs for CPU cooler
 Sustain and connect between CPU cooler and chassis
9. One iron backplate
 The iron backplate connects the motherboard and chassis, and sustain the mass of
CPU heatsink.
10. Two CPU Plastic backplates
 It can fix the third party CPU heatsink. Please refer to Chapter 3 for detail
information.
11. Two heatsink retention modules
 It can buckle up the CPU heatsink. Please refer to Chapter 3 for detail information.
IWILL User’s Manual

DN800-SATA/-LMotherboard IWILL
8 IWILL DN800-SATA/-L Series
Safety Notice
GENERAL SAFETY PRECAUTIONS
 Keep the area around the Server clean and free of clutter.
 Servers weigh a lot. When lifting the system, two people should lift slowly from
opposite ends with their feet spread out to distribute the weight. Always keep your
back straight and lift with your legs.
 Place the chassis top cover and any system components that have been removed
away from the system or on a table so that they won’t accidentally be stepped on.
 While working on the system, do not wear loose items such as neckties and
unbuttoned shirtsleeves. They can come into contact with electrical circuits or get
pulled into a cooling fan.
 Remove any jewelry or metal objects from your body, which are excellent metal
conductors and can create short circuits and harm you if they come into contact with
printed circuit boards or areas where power is present.
ESD PRECAUTIONS
Electrostatic discharge (ESD) is generated by two objects with different electrical charges
coming into contact with each other. An electrical discharge is created to neutralize this
difference, which can damage electronic components and printed circuit boards. The
following measures are generally sufficient to neutralize this difference before contact is
made to protect your equipment from ESD:
 Use a grounded wrist strap designed to prevent static discharge.
 Keep all components and printed circuit boards (PCBs) in their antistatic bags until
ready for use.
 Touch a grounded metal object before removing the board from the antistatic bag.
 Do not let components or PCBs come into contact with your clothing, which may
retain a charge even if you are wearing a wrist strap.
 Handle a board by its edges only; do not touch its components, peripheral chips,
memory modules or contacts.

IWILL DN800-SATA/-L Series 9
 When handling chips or modules, avoid touching their pins.
 Put the motherboard and peripherals back into their antistatic bags when not in use.
 For grounding purposes, make sure your computer chassis provides excellent
conductivity between the power supply, the case, the mounting fasteners and the
motherboard.
 After accessing the inside of the system, close the system back up and secure it to
the rack unit with the retention screws after ensuring that all connections have been
made.
OPERATING PRECAUTIONS
 Check package contents
 Missing or damaging accessories
Please contact your vendor immediately
 Motherboard damage
Please contact your vendor immediately
 Prepare minimum system components
 Intel Xeon @800MHz FSB Processor
 At least one Registered DDR2 memory module
 At least one SATA or IDE HDD
 EPS12V Power Supply with 460W or above
Important: You must have enough system integration knowledge before
the installation
IWILL Overview

DN800-SATA/-LMotherboard IWILL
10 IWILL DN800-SATA/-L Series
Getting Help
If a problem arises with your system during Installation or Operation, you should first ask
your dealer for help as they have most likely configured your system. They generally
have the best grasp of your issues and the fastest response for your symptoms. If your
dealer is near your location, it is recommended that you first bring your system to them to
have it serviced instead of attempting to solve the problem yourself.
If those options don't work for you, IWILL also provides some helpful resources to help
you.
1. Visit IWILL® website at Http://www.iwill.net and navigate to this product’s page
which contain links to product updates such as Jumper settings or BIOS updates.
2. The FAQ (Frequently Asked Questions) sections in the IWILL website are often
helpful since other users often have the same questions.
3. Email us at: [e-mail] and we will try to answer your questions within 5
business days.

IWILL DN800-SATA/-L Series 11
DN800-SATA/DN800-LSpecifications
Processor  Intel® Dual Xeon Socket 604 CPUs
 Supports 800MHz FSB
Chipset  Intel E7525 Chipset MCH
 Intel Hance Rapids
 Winbond 83627 THF
Memory  4 DIMMs for 240-pin DDR2 DIMM sockets
 Uses Registered DDR2 with ECC or Non-ECC memory
 Supports total system memory size of up to 8GB
On-Board
LAN
 Intel GbE Controller
 One RJ-45 connectors for GbE
 Support PME
USB  4 x external USB 2.0 ports by NEC USB controllor
 4 x internal USB 2.0 headers by HR
IEEE-1394  3 x IEEE-1394 ports ( 1x external port, 2x internal headers)
Serial ATA
 4 Serial ATA ports supported by Silicon Image with RAID 0, 1, 10
(DN800-SATA Only)
 2 Serial ATA ports supported by HR
 Support Adaptec Host RAID
 Support hot swap
Expansion
Slots
 One PCI Express x16 slot
 One PCI Express x8 slot
 Three PCI 32/33 slots
Internal I/O
connector
 1 x 34-pin Floppy Connector
 4-pin CD-In and Aux-In audio input connector
IDE Bus
 2x 40-pin IDE connectors, supports up to four (4) Enhanced IDE
devices
 Dual Channel Master Mode
 Ultra DMA 100/66/33
IWILL Overview

DN800-SATA/-LMotherboard IWILL
12 IWILL DN800-SATA/-L Series
External I/O
 PS/2 mouse and keyboard connectors
 1 x UART 16550 serial port (COM1)
 1 x 25-pin parallel port with ECP/EPP support
 4 x USB 2.0 ports
 1 x Gigabit Ethernet LAN RJ-45 port
 1 x IEEE-1394 port
 1 x S/PDIF Out
 Rear Out and Center Out
 Audio Phone Jacks - Line Out, Mic In, Line-In.
Internal I/O
 1 x UART by 9-pin header
 1 x Smbus connector
 1 x WOL connector
 1 x IR connector
System BIOS
 AMI BIOS
 Flash write protection by BIOS and one jumper
 ACPI 1.1
 APM 1.2
 Support ACPI S1
 Support ASF2.0
System Management
 Hardware Monitor control by ADT-7460
 Fan speed control method: DC FAN
 Support AC power failure
Form Factor
 ATX form factor
 12’’x10’’
 EPS 12V power connectors (24 pin + 8 pin)

IWILL DN800-SATA/-L Series 13
Chapter 2 Components and Jumper Setting
IWILL Components and Jumper Setting

DN800-SATA/-LMotherboard IWILL
14 IWILL DN800-SATA/-L Series
Motherboard Layout:

IWILL DN800-SATA/-L Series 15
Components List
CPU1; CPU2 Intel Xeon Socket604 Processor
Primary; Secondary IDE Driver Connectors
Floppy Floppy Disk Driver Connector
PCI Slots PCI-Express x16, x8 Slots; PCI 32/33
DIMM A1~B2 Memory Socket for DDR2 Memory
JP1 Clear CMOS Jumper
JP3, JP3A FSB Jumper
JP16 BIOS Protect Jumper
J32 COM2 Port
J34, J34A USB 2.0 Headers
J42 Case Open Pin Header
J43 Front Panel Connector
J45 IrDA Connector
J46 WOL Connector
J48 SMBus Connector
J53 AUX-IN
J54 CD-IN
J57B Audio Jumper
J58, J58A, J58B, J58C, J58D, J58E Serial ATA Connectors
J60A, J60B IEEE-1394 Headers
IWILL Components and Jumper Setting

DN800-SATA/-LMotherboard IWILL
16 IWILL DN800-SATA/-L Series
1
2
Jumper Setting
JP1: Clear CMOS Header
The onboard button cell battery powers the CMOS RAM. It contains all the BIOS setup
information. Keep the jumper connected to pins 1-2 (Default) to retain the RTC data as
shown below.
Under certain circumstances, you will need to reset system settings. Follow these
instructions to clear the CMOS RTC data:
1. Turn off the computer.
2. Short pins 2 and 3 with a jumper for a few seconds.
3. Replace the jumper to pins 1 and 2.
4. Turn on your computer by pressing the power-on button.
5. Hold down <F2> during boot and select either <Load Optimal Defaults> or
<Load Failsafe Defaults> in the “Exit” section. Then go through the BIOS setup
to re-enter user preferences.
1-2 2-3
Normal (Default) Clear CMOS
3

IWILL DN800-SATA/-L Series 17
1
JP3; JB3A: FSB Jumper
This header lets you set your memory speed. Depend on the memory you choose, please
adjust this jumper in order to optimize your memory utilize.
JP16: BIOS Protection Jumper
This jumper protects the system from unnecessary updating or flashing of the BIOS. It
secures the BIOS therefore prevents accidental overwriting of the data stored in flash
memory.
JP16
1-2 By Soft (default)
2-3 Lock
Open Unlock
J42 Case Open Pin Header
Case Open is a security function. This can detect whether the chassis (case) had been
opened or not. If the case had been opened, the open record would show on the screen
until you delete this message.
FSB JP3A JP3 MEMORY
800MHz (Default) Pin1-2 Pin1-2 DDRII-400
Setting J42
Open Disable
Close Enable
12
3
12
3
IWILL Components and Jumper Setting

DN800-SATA/-LMotherboard IWILL
18 IWILL DN800-SATA/-L Series
J57: Front Audio Jumper
This header lets you enable or disable the function of the front audio connector.
J57 W/O FRONT
AUDIO
CONNECTOR
WITH FRONT
AUDIO
CONNECTOR
5-6 SHORT OPEN
9-10 SHORT OPEN

IWILL DN800-SATA/-L Series 19
Rear Panel I/O Ports
This is an illustration of the Mainboard rear I/O port array
PS/2 Mouse Connector (6-pin Female)
The system will direct IRQ12 to the PS/2 mouse if one is detected. If no mouse is
detected, IRQ12 will be free for expansion cards to use.
PS/2 Keyboard Connector (6-pin Female)
This connection is for standard keyboards using a PS/2 (mini DIN) plug. This connector
will not accept standard AT size (large DIN) keyboard plugs. You may need a DIN to
mini DIN adapter for standard AT keyboards.
Parallel Printer Connector (25-pin Female)
You can enable the parallel port and choose an IRQ through the BIOS. You can choose
between ECP and EPP support through the BIOS setup.
Serial Port (COM1) Connector (9-pin Male)
The COM1 serial port can be used for pointing devices or other serial devices.
Universal Serial Bus Ports (4-pin Female)
Four onboard external USB 2.0 ports are available for connecting USB devices. Refer to
USB 2.0 Ports & Header for more information.
IWILL Components and Jumper Setting

DN800-SATA/-LMotherboard IWILL
20 IWILL DN800-SATA/-L Series
IEEE 1394/ FireWire Connector (6-pin Male)
You have one (1) onboard IEEE 1394 connector port for connecting FireWire devices.
Refer to IEEE 1394 Ports & Header for more information.
Onboard LAN Port (RJ-45)
This Mainboard uses Intel Gigabit Ethernet Controller. Refer to the Onboard LAN User
Guide for further information.
Audio Jacks (Phone Jacks)
The interface is supported by the onboard Analog Device AD1980. It has 3 phone jacks
for Line-Out, Microphone In, and Line-In.
S/PDIF Port
DN800-SATA/ DN800-Lalso provide the S/PDIF out, Rear Out, and Center Out
function.