J D Williams 011 9435 Series User manual

Assembly Instructions - Please keep for future reference
Width - 42.0cm
1 Door Storage Cabinet
Important - Please read these instructions fully before starting assembly
If you need help or have damaged or missing parts, call the Customer Helpline: 01709 534123
Please turn to back page for important information when contacting Customer Helpline.
Dimensions
Depth - 35.0cm
Height - 79.0cm
Rev A - 20/06/19
011 xx 9435
MADE IN
GREAT BRITAIN

Important - Please read these instructions fully before starting assembly
Safety and Care Advice
Check you have all the
components and tools listed on
pages 2 and 3.
Remove all fittings from the
plastic bags and separate them
into their groups.
Keep children and animals
away from the work area, small
parts could choke if swallowed.
Make sure you have enough
space to layout the parts before
starting.
Do not stand or put weight on
the product, this could cause
damage.
Assemble the item as close
to its final position (in the same
room) as possible.
Assemble on a soft level
surface to avoid damaging the
unit or your floor.
Parts of the assembly will be
easier with 2 people.
We do not
recommend the
use of power
drill/drivers for
inserting screws,
as this could damage the unit.
Only use hand screwdrivers.
Care and maintenance
Always lift furniture when
moving it (do not drag)
otherwise the joints may be
damaged.
From time to time check that
there are no loose screws on
this unit.
This product should not be
discarded with household
waste. Take to your local
authority waste disposal centre.
1
Dust surfaces with a soft, dry,
lint free cloth.
More stubborn marks can be
removed using a damp
(not wet) cloth. Wipe the
surface dry immediately
using a soft lint free cloth.
Do not use detergents, abrasive
cleaning products or cleaning
products that contain ammonia,
solvents or silicone as these
may damage the surface finish.
To protect the furniture,
position the furniture out of
direct sunlight and away from
direct heat sources such as
radiators and fires.
Do not place the furniture in
excessively dry and humid
conditions.
Do not place hot or cold
objects on the surface, always
use protective mats to avoid
marking the furniture.
Clean spills up immediately
Dispose of all packaging
carefully and responsibly
when assembly complete.
Do Not dispose of packaging
until assembly complete.

Please check you have all the panels listed below
Components -Panels
2
Important - Thick lines indicate finished edges
End Panel x 2
(79x35cm)
1492
Shelf x 3
(39x34.8cm)
1491
Door Panel
(36.6x38.4cm)
1493
Back Panel
(78.5x41.6cm)
1494

3
70 80 90 100 110 120
010 20 30 40 50 60
mm
130 140 150 160 170
Ruler - Use this ruler to help correctly identify the screws
Please check you have all the fittings listed below
Components - Fittings
Note: The quantities below are the correct amount to complete the assembly, In some cases more
fittings may be supplied than are required.
Tools required
If you have damaged or missing components, call the
Customer Helpline: 01709 534123 Please turn to back page
for important information when contacting Customer Helpline.
Cross headed screwdriver
(medium & large )
Small Hammer
Tape Measure
Bradawl
Eye protection
(when using a
hammer)
Hingeplate x 2
Code 653006000
Screw x 12
Code 690001075
ABC
E
D
I
G
HJ
Screw x 4
Code 690001008
Fully cranked 26mm
hinge x 2
Code 652001120
18mm bolt x 2
Code 700002021
KM
L Bracket x 1
Code 760001901
12mm Screw x 2
Code 690001099
Handle x 1
Code 643003506
Panel pin x 24
Code 760001012
Panel pin guide x 1
Code 684004501
Cover cap x 12
N
Door Stopper x 1
Code 680362030

Exploded View
4
1492
1494
1491
1491
1491
1492
1493