J D Williams Corner TV Unit User manual

Assembly Instructions - Please keep for future reference
Width - 98.4cm
Corner TV Unit
Important - Please read these instructions fully before starting assembly
If you need help or have damaged or missing parts, call the Customer Helpline: 01709 534123
Please turn to back page for important information when contacting Customer Helpline.
Dimensions
Depth - 38.8cm
Height - 41.6cm
Rev A - 12/04/19
033 xx 9410
MADE IN
GREAT BRITAIN

Important - Please read these instructions fully before starting assembly
Safety and Care Advice
Check you have all the
components and tools listed on
pages 2 and 3.
Remove all fittings from the
plastic bags and seperate them
into their groups.
Keep children and animals
away from the work area, small
parts could choke if swallowed.
Make sure you have enough
space to layout the parts before
starting.
Do not stand or put weight on
the product, this could cause
damage.
Assemble the item as close
to its final position (in the same
room) as possible.
Assemble on a soft level
surface to avoid damaging the
unit or your floor.
Parts of the assembly will be
easier with 2 people.
We do not
recommend the
use of power
drill/drivers for
inserting screws,
as this could damage the unit.
Only use hand screwdrivers.
Care and maintenance
Always lift furniture when
moving it (do not drag)
otherwise the joints may be
damaged.
From time to time check that
there are no loose screws on
this unit.
This product should not be
discarded with household
waste. Take to your local
authority waste disposal centre.
1
Dust surfaces with a soft, dry,
lint free cloth.
More stubborn marks can be
removed using a damp
(not wet) cloth. Wipe the
surface dry immediately
using a soft lint free cloth.
Do not use detergents, abrasive
cleaning products or cleaning
products that contain ammonia,
solvents or silicone as these
may damage the surface finish.
To protect the furniture,
position the furniture out of
direct sunlight and away from
direct heat sources such as
radiators and fires.
Do not place the furniture in
excessively dry and humid
conditions.
Do not place hot or cold
objects on the surface, always
use protective mats to avoid
marking the furnture.
Clean spills up immediately
Dispose of all packaging
carefully and responsibly
when assembly complete.
Do Not dispose of packaging
until assembly complete.

Please check you have all the panels listed below
Components -Panels
2
Important - Thick lines indicate finished edges
Left End Panel
(40x26.6cm)
1171
Right End Panel
(40x26.6cm)
1172
Back Rail Panel
(56,4x22.4cm)
1177
Drawer Bottom
(54.2x29.8cm)
9818
Top Panel
(98.4x38.8cm)
1169
Plinth Panel
(95x7.6cm)
9148
Bottom Panel
(95x24.9cm)
1170
Left Divider Panel
(30.7x36.9cm)
1173
Right Divider Panel
(30.7x36.9cm)
1174
Shelf Panel
(56.4x36.9cm)
1175
Small Shelf Panel x2
(17.6x24.7cm)
1176
Draw Front Panel
(59x15.7cm)
1198
Left drawer side (30x10cm)
Drawer back (53.1x10cm)
Right drawer side (30x10cm)
622xx7002
624xx7029
623xx7002
Back Panel x2
(31.9x16.8cm)
1179

3
70 80 90 100 110 120
010 20 30 40 50 60
mm
130 140 150 160 170
Ruler - Use this ruler to help correctly identify the screws
Please check you have all the fittings listed below
Components - Fittings
Note: The quantities below are the correct amount to complete the assembly, In some case more
fittings may be supplied than are required.
Tools required
If you have damaged or missing components, call the
Customer Helpline: 01709 534123 Please turn to back page
for important information when contacting Customer Helpline.
Cross headed screwdriver
(medium & large )
Cross headed
small screwdriver
Small Hammer
Tape Measure
Eye protection
(when using a
hammer)
Large cam x 20
Code 760001103
Metal dowel x 22
Code 760003004
ABC
E
DF
I
Small cam x 2
Code 760003005
8mm screw x 4
Code 700003510
Panel pin x 10
Code 760001012
Panel pin guide x 1
Code 684004501
G
Runner x 2
Code 760001040
H
Handle x 1
Code 644005520
JKL
M
9mm bolt x 2
Code 690001078
Wooden dowel x 2
Code 770001006
Shelf stud x 8
Code 681003001
45mm screw x 8
Code 690001075
20mm bolt x 2
Code 700002006

Exploded View
4
1169
1171
1172
1173
1174
1170
9148
1177
1176
1176
1175
1178
9818
1179
1179
622xx7002
623xx7002
624xx7029

Step 1
Assembly Instructions
5
A
x4
A
A
A
A
1170
A
Fitting cams to the
bottom panel.
Insert 4 metal cams
into the bottom panel
.
Note: Ensure cam arrow
points towards the edge
with the hole.
1170
A
A
x4
A
x4
Step 2
Fitting cams to the
shelf panel.
Insert 4 metal cams
into the shelf panel
.
1175
A
Step 3
Fitting cams to the
plinth panel.
Insert 4 metal cams
into the plinth panel
.
9148
A
A
A
A
A
1175
A
A
A
9148
A

B
B
Assembly Instructions
6
Step 4
Step 5
Attach dowels, cams
and shelf studs to left
end panel.
x8
B
x4
B
B
B
B
B
B
B
BB
B
B
B
BB
BB
A
A
K
K
K
K
A
A
x2
K
K
x2
x4
BA
x2
K
x2
A
A
Fitting dowels to the
top panel.
B
B
Insert 8 metal dowels
into the top panel
Note: Insert metal
dowels as far as
shown by arrows. Do not
over tighten.
Insert 4 metal dowels ,
2 shelf studs and 2
cams into the end
panel .
1169
1171
Step 6
Attach dowels, cams
and shelf studs to right
end panel.
B
A
K
Insert 4 metal dowels ,
2 shelf studs and 2
cams into the end
panel .
1172
B
1169
1171
1172

Assembly Instructions
7
x2
BA
x2
H
E
Front of Runner
H
E
Back of Runner
Step 7
Attaching runners to
the right divider.
A: Position the runner so
that the second hole
from the front of the
runner lines up with the
pre-drilled hole nearest
to the edge of the panel.
Use screws to secure
the runner.
Slide the runner forward
revealing the back of the
runner. The second hole
to the back of the runner
will now line up with the
second pre-drilled hole.
B: Insert 2 metal dowels
and 2 cams and
1 wooden dowel into
the end panel .
E
Front of runner
B
B
B
B
A
A
H
x1
E
x2
G
x1
x2
BA
x2
H
x1
E
x2
A
G
B
1174
Step 8
Attaching runners to
the left divider.
A: Position the runners
as detailed in the previous
step.
B: Insert 2 metal dowels
and 2 cams and
1 wooden dowel into
the end panel .
A
G
B
1173
A
A
E
E
H
E
E
H
G
x1
G
1174
1173
G
A
B
A
B

Assembly Instructions
8
x2
B: Insert wooden dowels
in drawer back
into holes in
left
right hand
drawer sides.
A: Insert small cams
into left
and right
drawer sides.
Note: Ensure cam arrow
points towards the edge
with hole.
Left hand side
Right hand side
Left hand side
Right hand side
Drawer Back
622xx7002
624xx7029
623xx7002
622xx7002
623xx7002
622xx7002
623xx7002
623xx7002
624xx7029
622xx7002
A
B
C
C
C
C: Slide drawer bottom
into grooves in the left
and right drawer sides
and the drawer back.
Drawer images
reduced in size
for illustration
purposes.
SLIDE!
9818
622xx7002
623xx7002
624xx7029
C
Plain chipboard surface
to underside.
Step 9 x2
B
x1
I
x2
M

Assembly Instructions
9
B
1178
B
B
D:Insert 2 metal dowels
into the the drawer
front .
1178
E:Locate the metal
dowels (already inserted)
in the drawer front into the
small cams in the left and
right hand drawer sides.
Turn cams 180 degrees to
lock.
D
1178
F
F: Secure handle to
drawer front
using bolts .
I
M
1178
1178
E
623xx7002
624xx7002

Assembly Instructions
10
Step 10
Connect the bottom
and plinth panel to the
right end panel.
FINISHED EDGES TO
THE FLOOR!
Connect the cams in the
bottom panel and
the plinth panel to
the dowels in the right
end panel .
Step 11
1170
9148
1172
Connect the bottom
and plinth panel to the
left end panel.
Connect the cams in the
bottom panel and
the plinth panel to
the dowels in the left
end panel .
1170
9148
1171
1172
1170
1170
1171
9148
9148
Ensure plinth is
not overhanging.
Ensure plinth sits
flush.

Assembly Instructions
11
Step 13
Secure the back rail
to the divider panels.
Step 14
Step 12
Connect the shelf
panel to the divider
panels.
Connect the cams in the
shelf panel to the
dowels in the right divider
panel and the left
divider panel .
1173
1174
1175
Using screws fix
the back panel to
the right divider panel
and the left divider
panel .
1173
1174
1177
L
L
L
Connect the top panel
to the divider panels.
Connect the cams in the
right divider panel
and the left divider panel
to the cams in
the top panel .
1173
1174
1169
L
L
L
x4
1173
1177
1169
1173
1174
1175
1174
1173
1174

Assembly Instructions
12
Step 15
Connect the wooden
dowels in the right divider
panel and the left
divider panel to
the middle holes in the
bottom panel .
Connect the cams in the
right end panel and
the left end panel
to the dowels in the top
panel .
Connect the dividers
and top panels to the
left and right end
panels and the bottom
panels.
L
L
L
L
L
x4
1172
1170
1170
1171 1174
1173
1169
1174
1173
1173
1174
1170
1172
1171
1169
Step 16
Secure the divider
panels.
Using 4 screws fix
the bottom panel to
the right divider
and the left divider
.
1173
1174
1170
L

Assembly Instructions
13
Step 17
Step 18
D
F
D
D
x10
F
x1
Attach the back panel
to the unit.
Plain chipboard surface.
Slide the back panels into
the grooves from the
bottom and push the
back panel up to the top
panel.
Use the panel pin guide
when locating the panel
pins. This will hold the
panel pins vertical and
ensure the correct
distance from the edge.
Stand the unit upright
once this step is
complete.
2nd Hole
J
Fitting the drawer.
For this step we
recommend you follow
the helpful hints on the
next page.

Assembly Instructions
14
Step 19
Locate drawers helpful
hints
PULL SLIDING PART OF DRAWER RUNNERS
OUT SO THEY ARE FULLY EXTENDED. LOCATE DRAWER ONTO RUNNERS
WHILST KEEPING RUNNERS EXTENDED.
LINE UP THE FRONT HOLE IN THE DRAWER SIDE WITH THE 2ND THREADED
HOLE IN THE RUNNER.
WHILE PUSHING THE RUNNER AGAINST THE DRAWER SIDE, SCREW THE
BOLT FROM THE INSIDE OF THE DRAWER, THROUGH THE HOLE IN THE DRAWER SIDE
AND INTO THREADED HOLE IN THE RUNNER.
REPEAT ON OPPOSITE DRAWER SIDE
2nd HOLE
C
AB
Step 20
Insert remaining shelf
studs into the divider
panels.
Insert 4 of the shelf studs
into the divider panels.
K
K
x4
Slide the shelves into
the unit so that they sit
onto the shelf studs.
1176
1176

Assembly Instructions
Congratulations! Your unit is complete.
Important Information
If you need help or have damaged or missing parts, call the Customer Helpline:
01709 534123 8am - 4.30pm (Monday toThursday)
8am - 2.30pm (Fridays)
Please have the following information to hand:
>> Unit Description
>> Product Code
>> Product Colour
>> Place of Purchase
>> Catalogue Ref. No.
>> Item Code
>> Assembly Instructions
You can also e-mail your requests to us at:
[e-mail]
Alternatively, you can write to us at: Customer Service Department, Addspace Furniture Limited,
Braithwell Way, Hellaby Industrial Estate, Hellaby, Rotherham, SouthYorkshire, S66 8QY.
We do have an answer machine should you contact us out of office hours, so in addition to
the above information could you leave your name, address, daytime telephone number and
the nature of your call on the answerphone. All calls will be actioned asap.
(by contacting the customer service line your statutory rights are not affected)