Javes JCD-720P User manual

JAVES JCD-720P
LED & LCOS Projector
User Manual

IMPOR AN SAFEGUARDS
1．Please read and understand all safety
instructions in the manual and keep it
appropriately for future reference.
2．Don’t look directly into the lens when
the lamp is turned on. Serious damage to
your eyes could result.
3．Refer all service to qualified service
personnel.
4．When the projector is under working,
be sure that lens cap is open. Don’t put
any object before the lens to block it,
which will cause the objects to become
hot.
5．The product is designed to operate on
a power supply of 100 to 240 V 50/60 Hz
AC. Ensure that your power supply fits

these requirements before attempting to
use the unit. If the voltage fluctuates
more than 10% or in an unstable voltage
and possible power-off area, you’re
suggested to use the Automatic Voltage
Regulator, SPD, or UPS to connect the
power cable.
6．Don’t put the projector on an unstable
cart, stand or table. The projector may
fall, causing serious damage.
7 ． disassemble or try to repair the
projector by yourself as opening or
removing covers, it may cause the
invalidation of product guarantee. Refer
all service to qualified service
personnel.
8．Don’t put the projector in any of the
places below:
①. Poorly ventilated or narrow spaces.

Please keep the projector at least 50 cm
away from wall and make sure that the air
is circulating around the projector.
②．Hot places like in a car with window
closed.
③．The places with excessive moisture,
dirt, dust, fog or others which will
pollute the optics components, shorten
the service life and make the screen get
darker.
④．The places nearby heat sources like
radiators, heat registers, stoves, or
other products (including amplifiers)
that produce heat, or put the product
exposed to direct sunlight.
⑤．The places where temperature is above
40°c / 104°f.
⑥．The places with elevation more than
3000 meters(10000 feet).
9．Don’t block ventilation openings.

10．Don’t put projector on blankets, pads
or other soft coverings that may block the
vents.
11．Don’t cover the projector with cloth
or other materials.
12．Don’t put any inflammable material
nearby the projector.
13．The thermovent should never be covered
or blocked. It is provided for
ventilation to ensure reliable operation
of the product and to protect it from
overheating.
14． Keep the product on a flat, level
surface when in using.
15．Don’t step on the projector or put
any objects on it, which may cause damage,
accident and body injury.

16．Don’t set liquids on the projector.
Spilled liquids may damage your projector.
In case the projector get wet by liquids,
unplug it and call the authorized service
center for servicing.
Brief introduction
Outstanding features:
1．
．．
．Small size design enhances the portability
2．
．．
．LED projector (typical 0,000hrs)
．
．．
．Hi-Definition Multimedia Interface
4．
．．
．HDCP supported
5．
．．
．Remote Control

Inventory:
1- Projector
1- Remote control
1- AV cable
1- VGA cable
1- Operation manual
1- Warranty card
Optical SPEC ：
Panel Lcos
Light output
(ANSI Lumens)
60 Lumen
( screen lumens)
300 lumens ( lamp output)
Contrast
ratio
150:1
Projection
Screen Sizes
8 ～ 132 inches
Projection
Distance
0.3 ～ 5.5 meter
Native
Resolution
1280 x 768

Supported
Aspect Ratio
4:3 16:9
Video Input
supported
HDMI VGA CVBS
LED lamp
LED(OSRAM) 25w
LED life >30000h
Lens
Keystone
+13.8 ～ -2.8°
Input AC100 ～ 240V 50/60 Hz POWER
ADAPTER
Output DC19V, 3A
Typical POWER 30W
Weight 0 8kg

Projector appearance illustration:

Part names：
：：
：
1
11
1、
、、
、 UP
UP UP
UP button
buttonbutton
button
2
22
2、
、、
、 DOWN button
DOWN button DOWN button
DOWN button
3
33
3、
、、
、 ENU button
ENU button ENU button
ENU button
4
44
4、
、、
、 INPUT button
INPUT button INPUT button
INPUT button

5
55
5、
、、
、REMOTE CONTROL SENSOR
REMOTE CONTROL SENSORREMOTE CONTROL SENSOR
REMOTE CONTROL SENSOR
6
66
6、
、、
、FOCUS RING
FOCUS RINGFOCUS RING
FOCUS RING
7
77
7、
、、
、LENS
LENSLENS
LENS
8
88
8、
、、
、THERMOVENT
THERMOVENTTHERMOVENT
THERMOVENT
9
99
9、
、、
、AV input
AV inputAV input
AV input
10
1010
10、
、、
、HDMI input
HDMI inputHDMI input
HDMI input
11
1111
11、
、、
、VGA input
VGA inputVGA input
VGA input
12
1212
12、
、、
、DC socket
DC socketDC socket
DC socket
13
1313
13、
、、
、P
PP
Power on/off button
ower on/off buttonower on/off button
ower on/off button
14
1414
14、
、、
、P
PP
Power
owerower
ower-
--
-on indicator
on indicatoron indicator
on indicator
15
1515
15、
、、
、P
PP
Program
rogramrogram
rogram-
--
-error indicator
error indicatorerror indicator
error indicator
16
1616
16、
、、
、T
TT
Temperature warning indicator
emperature warning indicatoremperature warning indicator
emperature warning indicator

size：
：：
：

CONNEC ION：
：：
：
When connecting signal source to
projector, make sure that:
1. The equipments are turned off before
any connecting.
2. Using correct signal cable for every
signal source.
3．Make sure you connect the power cord
firmly into the DC socket.
The projector has 3 input interfaces,
which are HDMI input, VGA input, CVBS
input.
DMI input：
：：
：
Connecting projector to laptop or PC：
1．Connect one end of the HDMI cable to
HDMI interface on the computer. (DVI to

HDMI cable is needed if laptop or PC
don’t have HDMI interface itself.)
2．Connect the other end of HDMI cable to
projector。See pictures below:
3．Adjust the resolution on the second
screen to 1280x768 and refresh rate to
60HZ, extend the first screen to the
second screen. Adjust the resolution on
the first screen to 1024x768.

Click the second screen, adjust the
resolution to 1280x768 and checked at the
box“ ”

Click button, then click
button, the menu is as follows ： Set
into 60HZ.

click the screen
shows as：set nView
nViewnView
nView as

set into mode as follows and click”确
认”

VGA input：
：：
：
Connecting projector to laptop or PC：
1．use VGA cable, connect one end of the
cable to laptop or PC.(1.If laptop or PC

has two VGA interfaces, and you need a
dual view, then graphic card needs to have
same setting as in HDMI input. 2. If the
projector has DVI to VGA cable, and you
need a dual view, then graphic card also
needs to have same setting as in HDMI
input. )
2．Connect the other end of VGA cable to
projector as follows:
CVBS input：
：：
：
Connecting projector to laptop or PC：
1．Use S-VIDIO to AV cable, connect one
end of S-VIDIO cable to laptop or PC.