jbc MV User manual

MV
AIR PRESSURE
DESOLDERING SYSTEM
www.jbctools.com

2
MV/AIR PRESSURE DESOLDERING SYSTEM
++
+++
INSTALLATION
MV-A
DESOLDERING PUMP
0780637
CONNECTION CABLE
MANUAL
0821830
SUCTION FILTER SET
0005966
50 FILTERS BOX
0781046
SPARE COTTON FILTERS
0008446
ESCAPE FILTER
Air
Compressed
inlet
DD-2B
CONTROL UNIT
DR-SC
DESOLDERING
STAND
DR560-A
DESOLDERING IRON
MV-A
DESOLDERING
PUMP
Connectable control units:
DI, DD and DM.
Connectable singles line:
DV.
Power Cord Socket
Equipotential connection
MV
AIR PRESSURE
DESOLDERING SYSTEM
ww w.j bc too ls. com

3
AIR PRESSURE DESOLDERING SYSTEM ELEMENTS
CHANGING PUMP FILTERS
0008446
Escape filter
0005966
Spare filter
0781046
Spare filter
0821830
External filter
0007717
O Ring
Escape filter
ensemble
0004710
Control unit switch on indicator
Pump use indicator Desoldering air filter

WARRANTY
JBC’s 2 years warranty guarantees this equipment against all manu-
facturing defects, covering the replacement of defective parts and
all necessary labour.
Warranty does not cover product wear due to use or mis-use.
In order for the warranty to be valid, equipment must be returned,
postage paid, to the dealer where it was purchased enclosing this
fully filled in, sheet.
www.jbctools.com
SERIAL Nº
STAMP OF DEALER
DATE OF PURCHASE
0008797-1012
TECHNICAL SPECIFICATIONS
- Recommended air pressure: 5 bars
(max. 6 bares)
- Supply: 24V
- Power: 10W
- Weight of complete unit: 1,5 Kgs.
- Complies with CE standards on electrical safety, electromagnetic compatibility
and ESD protected housing “skin effect”
- RoHS compliant
- Equipotential connector and the tool tip are connected to station mains ground supply for ESD protection
This product should not be
thrown in the garbage.