NAE-2C
Control Unit
PORT
2
ROBOT
PEDAL
2
PORT
1
PEDAL
2
C115
C11
C105 /
C105 / C115
NAE-2C
Control Unit
PORT
2
ROBOT
PEDAL
2
NAE-2C
Control Unit
PORT
2
ROBOT
PEDAL
2
NAU
Control Unit
PORT
2
ROBOT
PEDAL
2
PORT
1
PEDAL
2
JBC Net
System Notifications
The following icons will be displayed on the screen’s status bar.
USB flash drive is connected.
Station is controlled by a PC.
Station is controlled by a robot. down-
loaded to the station.
Export graphics
Insert a USB flash drive into the
USB-A connector to save your
soldering process in csv format.
Get greater quality and control in your production.
Manage your whole soldering process remotely in real time.
For more information see www.jbctools.com/webmanager.html.
Station update
Download the JBC Update File from
www.jbctools.com/software.html
Insert the USB flash drive with the
file downloaded to the station.
Advanced Functionalities
Graphics
It provides detailed graphics of tip temperature and power delivery in real time during
solder joint formation for analysis purposes. This helps you decide how to adjust your
process or which tip to use to obtain the best quality soldering.
Station software update. Press INFO to
start the process.
Warning. Press INFO for failure description.
Error. Press INFO for failure description,
the type of error and how to proceed.
Files
Update
2
17:14
Hibernation
Actual Temp. 25ºC
Port
2
350ºC
Port
2
Power
45%
17:14
Selected 350ºC
NT115 NT115
NAU
Control Unit
PORT
2
ROBOT
PEDAL
2
NAU
Control Unit
PORT
2
ROBOT
PEDAL
2
C115
C11
C105 /
C105 / C115
19:29
19:29
Port
2
Actual Temp. 25ºC
NT105
ºC
Power
45%
Selected 350ºC
350
Port
2
NT105
Hibernation
19:29
Port
2
Actual Temp. 25ºC
AN115
Hibernation
19:29
ºC
Power
45%
Selected 350ºC
350
Port
2
AN115
NAU
Control Unit
PORT
2
ROBOT
PEDAL
2
NAU
Control Unit
PORT
2
ROBOT
PEDAL
2
C115
C11
C105 /
C105 / C115
19:29
19:29
Port
2
Actual Temp. 25ºC
NT105
ºC
Power
45%
Selected 350ºC
350
Port
2
NT105
Hibernation
19:29
Port
2
Actual Temp. 25ºC
AN115
Hibernation
19:29
ºC
Power
45%
Selected 350ºC
350
Port
2
AN115
Operation
When the tool is lifted from the holder the tip
will heat up to the selected temperature.
When the tool is in the holder, the power
is cut off and the tool cools down to room
temperature.
Tools Menu:
· Set temperature limits
· Set temperature levels
Tools Menu:
· Set Hibernation delay (from 0
to 60 min or no Hibernation)
2. Hibernation1. Work
This revolutionary technology is able to recover tip temperature extremely quickly.
This allows the user to work at a lower temperature.
As a result, tip life increases by 5.
JBC’s Exclusive Heating System
6
