John Lewis Emilia Large User manual

Recommended bulb:
2 x 28W G9 eco halogen capsule bulb
Bulbs not included
Specifications:
Max. power: 33W
Voltage: 220-240V~50/60Hz
Weight:1.6kg
Please retain these instructions for future reference.
This symbol indicates that this product should not be treated as normal
household waste and it should be recycled. John Lewis do not operate instore
take back, but as members of the Distributor Take Back scheme have funded the
development and upgrade of recycling facilities across the UK. Please take it to
your nearest collection facility or for further details contact your local council
or visit www.recycle-more.co.uk.
We have taken great care to ensure that this product reaches you in perfect
condition. However, should any parts be damaged or missing please e-mail
[email protected].uk
Trouble Shooting:
Why is the light not working when switched on?
Check your power supply is switched on
User manual
Emilia Large
Table Lamp
John Lewis Partnership
171 Victoria Street
London SW1E 5NN
johnlewis.com
Made in China

Thank you for purchasing this Emilia large table lamp. Please read the instructions
carefully before use to ensure safe and satisfactory operation of this product.
Please keep these instructions for future reference.
Warnings!
This fitting should be fitted in accordance with IEE Regulations and the Building
Regulations.If in any doubt, or where required by law, consult a competent
person who is registered with an electrical self-certification scheme. Further
information is available online or from your Local Authority.
To prevent electric shock switch off at the mains supply before installing or
maintaining this fitting. Ensure other persons cannot restore the electricity supply
without your knowledge.
If you are in any doubt, please consult a qualified electrician.
Always use the correct type and wattage bulb. Never exceed the wattage stated.
Do not cover. Keep away from curtains, bedding etc.
Always route mains cable so it does not present a hazard (entrapment, tripping etc.)
UNWIND THE CABLE FULLY; ensure that there are no twists or snags in the cable.
Plug into the mains supply; switch on using the inline cord switch provided.
If moving this lamp, always carry by holding the stand part(and not the bubble glass.)
CAUTION! The bulb and surrounding parts can become hot during use.
Care Instructions
Indoor use only.
Replace bulbs from John Lewis or established brand of the same type and compatibility.
Recommend the fitting should be cleaned with a soft dry cloth.
Parts list
Assembly
Ensure the house electricity supply is
switched off at the fuse board.
Step 1
Carefully unpack the carton, making sure
all parts are present before assembly. Place
lamp on a flat surface.
Step 2
Attach crystal chains to main frame, then
Fit bulb to the lamp holder. The
maximum power indicated must not
be exceeded.
Step 3
Attach the glass cover, then switch on the
electricity supply at the fuse board. Insert
the plug into the power supply and turn on
the switch.