John Lewis Hot Air Balloon 10 Light LED Outdoor Line... User manual

Light Source
Integrated LED
10 x 0.06 Watt Energy Efficient LED Bulbs (non replaceable)
Specification
Max Power: 0.6W
Voltage: 1.2V
Power Source: 1 x AA NI-MH Rechargeable 300 mAh Battery (included) / Solar Panel (included)
IP Rating: 44
John Lewis Partnership
171 Victoria Street
London SW1E 5NN
Johnlewis.com
Made in China
USER GUIDE
HOT AIR BALLOON 10 LIGHT LED
OUTDOOR LINE LIGHTS
15cm
1.35m 2m
This symbol indicates that this product should not be treated as normal house-hold waste
and it should be recycled. John Lewis does not operate in store take back, but as members of
the Distributer Take Back scheme have funded the development and upgrade of recycling
facilities across the UK. Please take it to your nearest collection facility or for further details
contact your local council or visit www.recycle-more.co.uk.
We have taken great care to ensure that this product reaches you in perfect condition. However,
should any parts be damaged or missing please contact the customer service team on 03456 050 144.

Recycling
Please retain these instructions for future reference.
Quality Guaranteed
At John Lewis & Partners we test every light to high quality standards, so we can offer a
2-year guarantee.

Thank you for purchasing this Hot Air Balloon 10 Light LED Outdoor Line Lights. Please
read the instructions carefully before use to ensure safe and satisfactory operations of this
product.
Before using the light set for the first time, we would recommend you charge
the product for 2 full days (turning off at dusk).
Warnings
When not in use or weather is not favourable, remove and store indoors in a dry location.
Keep out of the reach of children and pets.
Do not attempt to connect the light set electrically to any other light set or power source.
Do not attempt to replace the product battery.
This symbol indicates that batteries should not be disposed of in the normal household
waste, but taken to appropriate local recycling facilities, where and when these are available.
Never throw batteries in a fire or attempt to open the outer casing.
Parts List
ABx 1 x 1
Care instructions
We recommend cleaning with a soft, dry cloth. Do not use abrasive materials, as these
will damage the finish.
Assembly
Please ensure you remove all packaging from the product before positioning outside. Peel
off the protective film that is covering the solar panel.
Position the solar panel in direct sunlight and where it will be exposed for the longest time.
Do not position the solar panel where there are shadows from buildings, trees or other foliage,
as this will reduce the charging performance.
1. To avoid damaging the solar panel, install the ground spike into soft ground first, then slide
the solar panel onto the spike, ensuring it ‘clicks’ securely in place.
2. For continuous operation, turn the product on using the push switch, located on the under
side of the solar panel (see below diagram). The lights will automatically switch on at dusk
and recharge during the day.
Full charge will last up to 6-8 hours per day.
Solar Panel
ON/OFF
On/Off Switch
1.
2.
Solar Panel