John Lewis OUTDOOR SOLAR PATHFINDERS User manual

Light Source
Integrated LED
2 x 0.012 Watt energy efcient LED
LED non-replaceable
Specication
Max power: 0.024W
Rating: 1.2V
Power Source: 1 x AA Rechargeable 600mAh / Solar panel (Included)
IP rating: 44
Weight: 4 x 0.12Kg
Recycling
Please retain these instructions for future reference.
This symbol indicates that this product should not be treated as normal household waste
and it should be recycled. John Lewis does not operate instore take back, but as members of
the Distributer Take Back scheme have funded the development and upgrade of recycling
facilities across the UK. Please take it to your nearest collection facility or for further details
contact your local council or visit www.recycle-more.co.uk
We have taken great care to ensure that this product reaches you in perfect condition. However,
should any parts be damaged or missing please contact the customer service team on 03456 050 144.
OUTDOOR SOLAR
PATHFINDERS
USER GUIDE
John Lewis Partnership
171 Victoria Street
London SW1E 5NN
Johnlewis.com
Made in China

Thank you for purchasing this set of outdoor Solar path nders.
Important - Please read the instructions carefully before use to ensure safe and
satisfactory operations of this product.
Charging and Operation
Before using the light set for the rst time, the batteries will need to be fully charged.
Allow approx. 10 hours of charging in daylight before use.
Warnings
This light set is for temporary outdoor use.
Do not connect the light set electrically to any other light set.
If required, only replace the rechargeable battery with the recommended type supplied
(1 x AA NI-MH 600mAh).
This symbol indicates that batteries should not be disposed of in the normal household
waste but taken to appropriate local recycling facilities, where and when these are available.
Never throw batteries in a re or attempt to open outer casing.
Assembly
Carefully unpack the carton, make sure all parts are present before assembly.
Care instructions
We recommend cleaning with a soft dry cloth. Do not use abrasive materials as these will dam-
age the nish.
Step 1
For this step you will require parts B.
Attach the spikes together as shown in the diagram.
Step 2
Now that Step 1 is complete attach Part B to the four holes
underneath Part A.
Step 3
Now that the assembly is complete set the power switch to
“ON” and allow a full days charge in daylight.
Charging time: Approx. 8-10 hours for a full charge.
Step 4
The light set will now automatically switch on at dusk and re-
charge during the day.
Install the lamp in direct sunlight and where it will be exposed
for the longest time. Don’t install the lamp where shadows from
buildings or trees etc. will fall as this will reduce charging
performance.
Qty
Parts List
A
Qty
4
Parts List
B4
