John Lewis Mitch Duo Touch Table User manual

John Lewis Partnership
171 Victoria Street
London SW1E 5NN
johnlewis.com
Made in China 16/01/2020
We have taken great care to ensure that this product reaches you in perfect condition.
However, should any parts be damaged or missing please contact the Product Helpline on
[phone].
This symbol indicates that this product should not be treated as normal household waste
and it should be recycled. John Lewis do not operate instore take back, but as members of the
Distributor Trade Back scheme have funded the development and upgrade of recycling facilities
across the UK. Please take it to your nearest collection facility or for further details contact your
local council or visit www.recycle-more.co.uk.
User manual
Mitch
Duo Touch Table Lamps
Please retain these instructions for future reference.
Recommended bulb (not included)
1 x 5-7W SES LED Energy efcient candle
or
1 x 28W SES Eco Halogen candle
When changing a bulb, always switch off at the mains and allow the bulb to cool before handling.
Dispose of used bulbs carefully. Do not exceed the rated power stated or use a different shape bulb
from that indicated on the tting. If LED bulbs are used, they must be suitable for dimming.
Specications
Max. power: 40W
Voltage: 240V, 50Hz
IP rating: IP20
Weight: 1.68kg

Assembly
Refer to assembly drawings below. Carefully unpack the carton, making sure all the parts are present
before assembly.
Thank you for purchasing these Mitch Table Lamps. Please read the instructions carefully before use
to ensure safe and satisfactory operation of this product.
Care instructions
We recommend cleaning with a soft dry cloth. Do not use abrasive materials as these will damage
the nish.
Warnings!
Please read these instructions carefully before commencing any work.
For your safety, always switch off the supply before changing lightbulbs, cleaning or removing shades.
Always take care when handling lightbulbs to avoid injury in case of breakage.
If the exible external cable becomes damaged, it should only be replaced by the manufacturer or
suitably qualied person.
This product is Class II (double insulated) and must not be earthed.
Figure 2 Step 3
Plug into the mains and switch on by touching
the metal base. Your table lamp is now ready
for use. This product has a 3-stage touch
dimmer: touch once to turn on, repeated
touches will increase brightness, and the last
time to switch off.
Parts list
Step 1
Refer to Figure 1. Remove the shade ring (A) from the
lampholder (B). Fit the shade (C) by slotting the shade over
the lampholder and securing in place using the shade ring.
Step 2
Fit the bulb as per the details overleaf.
A
B
C
Fi
g
ure 1
2
2
2