01 02
Description Image Quantity
Parts list
IntroductionThank you for purchasing this Harmony table lamp.
Please read the instructions and warnings carefully to
ensure a long life for your product and safe usage.
This instruction leaflet must be retained with the product
for future reference. These warnings have been provided
in the interest of safety. You MUST read them carefully
before using the appliance.
Warnings
Assembly instructions
A
This product is not intended for use by persons (including children) with reduced
physical, sensory or mental capabilities, unless they are properly supervised or given
instructions concerning the safe use of the item by a person responsible for their
wellbeing.
- To protect against fire, electric shock and injury, do not immerse cord, plug or base
unit in water or other liquids.
- Unplug from the mains when not in use, when removing or attaching accessories
and before cleaning any part of the appliance.
- Do not operate any appliance with a damaged cord or plug. Should the item
malfunction, or if it is damanged in any manner, please stop using it and return it to
the nearest John Lewis store.
- Do not let the power cord overhang the edge of the surface on which it stands,
or touch anything hot.
- When unplugging the device, hold the plug itself, not the power cord.
- In the event of a fault, contact your nearest John Lewis store. Do not attempt to
repair it yourself.
- Do not use the appliance for any purpose other than its intended use.
- This appliance is for household use only. Do not use it outdoors.
- Please save these instructions for future reference.
WARNING: Polythene bags over the product or within packaging may be dangerous.
To avoid the risk of suffocation, please keep away from babies and children.
X 1TABLE LAMP
Installation instructions
1
3
2
Place the bulb in the socket and screw tightening in the
sense of clockwise until it stops.
Then enter the cable plug into the wall socket.
Finally press the swith on the cable and the luminaire
will light.
B
C
Step 1
Remove the plastic cover.
Step 2
Take out the separation
piece.
Step 3
Push down slightly full stop.
1 2 3
