John Lewis CHELSEA User manual

John Lewis Partnership
171 Victoria Street
London SW1E 5NN
johnlewis.com
Made in China Please retain these instructions for future reference.
5 year guarantee
If you experience any unresolvable technical issues with the product,
contact your nearest John Lewis & Partners shop or John Lewis & Partner
Technical Support on 03301 230106.
Aftercare and
Troubleshooting
Max. wattage: 28W
Voltage: 220–240V, 50Hz
IP rating: 20
Weight: 0.54kg
At John Lewis & Partners we test every light to high quality standards so we are
able to offer you a 5 year guarantee.
Specification
Recycling
Caring for
your product
We recommend cleaning with a soft dry cloth. Do not use abrasive materials as
these will damage the nish.
This symbol indicates that this product should not be treated as
normal household waste and it should be recycled. John Lewis & Partners
do not operate instore take back, but as members of the Distributor Take
Back scheme have funded the development and upgrade of recycling
facilities across the UK. Please take it to your nearest collection facility or
for further details contact your local council or visit www.recycle-more.
co.uk.
CHELSEA PLUG-IN WALL LIGHT
USER GUIDE
28/10/2020

01 02
Parts list Image Qty
Introduction Thank you for purchasing this Chelsea Plug-In Wall Light.
Please read the instructions carefully before
use to ensure safe and satisfactory operation
of this product.
Warnings This is a Class II product and must NOT be earthed.
Please read these instructions carefully before commencing any work.
This product is designed to be xed to a wall and connected to a mains power outlet
via the supplied 3-pin plug. Do not remove the plug and connect by other means.
IMPORTANT: Children can become entangled in loose cable. Ensure excessive loops
of cable are secured against the wall using the ttings supplied. Do not use
this product in children’s bedrooms.
Recommended bulb (not included)
1 x 28W SES Eco Halogen Golf Ball bulb, or
1 x 6W SES LED Energy Efcient Golf Ball bulb
When changing a bulb, always switch off at the mains and allow the bulb to
cool before handling. Dispose of used bulbs carefully. Do not exceed the rated
power stated or use a different shape bulb from that indicated on the tting.
Recommended Bulb
Product assembly
2
4
3
Fit the recommended bulb per specications.
To keep the cable tidy, this product is supplied with two
retaining clips. Decide on the cable position. Using the
retaining clips as a template mark and drill the position
of the xing holes.
Be careful not to damage any wiring or pipes. Place the
clips around the cable and x in place using the supplied
small screws (E).
Fix the bracket to the wall using the supplied screws (B).
Fix the product (C) to the bracket using the supplied
screws (D).
D
C
5Plug into a mains outlet. Your wall light is now ready
to use. Switch on using the inline switch. Note: The
shade may get hot. Only adjust after the tting has been
switched off for ten minutes.
1Select the mains power outlet you wish to connect the
plug to and hold the xing bracket in place on the wall,
marking the xing hole positions. Check there are no
mains cables or pipes beneath the wall. Drill the holes
and t the supplied wall plugs (A) - which are suitable
for masonry only. This product is not suitable for use in
children’s bedrooms.
B
E
Light tting (C)
Fixing bracket
Screws (B)
Wall plugs (A)
Small screws (E)
Retaining clips
1
1
2
2
4
2
A