John Lewis MUSHROOM LED TOUCH User manual

Please retain these instructions for future reference.
John Lewis Plc
171 Victoria Street
London SW1E 5NN
johnlewis.com
Made in China
09/06/2023
Product
information
• Indoor use only
• 3 step dimmable
• Clean the tting with a soft dry cloth. Do not use abrasive chemical cleaners as
this will damage the nish
Aftercare and
Troubleshooting
Please note the touch sensor will use a small amount of current at all times and will
slowly drain the battery even when the light is off.
If you nd the lamp turning itself off, even when the product is put on charge, it
means the battery has been almost completely drained and needs initial charging
before the lamp can be switched on again. Please refer to Step 3.
If there are technical issues with this product that you are unable to resolve,
please contact your nearest John Lewis & Partners shop or call Technical Support
on 03301 230106.
Specication Max power: 2W LED
3000K 129Lm
Rated input (charging): DC 5V
Battery: 3.6V
IP rating: 20
Weight: 0.8kg
Charging time: 8 hours when fully discharged
4 hours (approx.) in normal use
For further information please visit: www.lighting-info.co.uk/106266
2-year guarantee At John Lewis & Partners we test every light to high quality standards.
That means we can offer you a 2-year guarantee.
Recycling This symbol indicates that this product should not be treated as normal
household waste and it should be recycled. John Lewis & Partners do not
operate instore take back, but as members of the Distributor Take Back
scheme have funded the development and upgrade of recycling facilities
across the UK. Please take it to your nearest collection facility or for further
details contact your local council or visit www.recycle-more.co.uk.
MUSHROOM LED TOUCH
BATTERY POWERED TABLE LAMP
USER GUIDE
2
SELV

Product assembly
Step 1
Carefully unpack the carton, making sure all the parts are present before assembly.
Step 2
Connect the DC connector (A) to the product (B).
Step 3
Charge the battery, which is already tted to the product before rst use.
Plug in the power adapter and ensure the product is fully charged before operating.
The light indicator on button (C) will turn from red to green when fully charged.
Your table lamp is now ready for use.
To operate the on/off dimmer, touch the button (C) on the back of your lamp.
(one touch low light level, second touch brighter, third touch brightest and fourth
to turn off).
When used on the brightest setting the light will start to dim after 6-8 hours of use.
Top up the battery by charging the lamp until the light turns green (approx. 4 hours).
Always unplug after charging.
Note:
The shade had been pre-assembled for your convenience.
If the shade is loose, tighten by rotating clockwise.
Getting started Thank you for purchasing this John Lewis & Partners product. For your safety,
and to make sure everything is working properly, please read the instructions
carefully before use.
Warnings This product is battery powered and the internal battery is recharged via a plug-in
SELV power adapter.
Under no circumstances should the product be used or charged with a different
plug-in power adapter otherwise damage could occur.
This product is for indoor use only, and not suitable for a bathroom or
outdoor location.
Do not plug this product directly into the mains or by other means other than
the supplied driver.
The transformer or power supply is not a toy.
This product is not suitable for children under 3 years of age.
The battery must not be opened, destroyed or incinerated.
The battery in this product is non-replaceable and if damage occurs must
be disposed of responsibly.
Parts list Description Image Quantity
Light tting x 1
Plug-in DC
power adapter
x 1
A
B
C