Thank you for purchasing the Outdoor Crackle Glass Colour Changing Solar Stakes. Please read
the instructions carefully before use to ensure safe and satisfactory operations of this product.
Charging and Operation
Before using the light set for the first time, we would recommend you charge
the product for 2 full days (turning off at dusk).
Warnings
When not in use or weather is not favourable, remove and store indoors in a dry location.
Keep out of the reach of children and pets.
Do not attempt to connect the light set electrically to any other light set or power source.
Do not attempt to replace the product battery.
This symbol indicates that batteries should not be disposed of in the normal household
waste, but taken to appropriate local recycling facilities, where and when these are available.
Never throw batteries in a fire or attempt to open the outer casing.
Care instructions
We recommend cleaning with a soft, dry cloth. Do not use abrasive materials, as these will
damage the finish.
Assembly
Carefully unpack the carton, make sure all parts are present before assembly.
Please ensure you remove all packaging from the product before positioning outside.
Position the solar panel in direct sunlight and where it will be exposed for the longest time.
Do not position the solar panel where there are shadows from buildings, trees or other
foliage, as this will reduce the charging performance.
1. The stake “F” has been put inside the tubing “C” for safe transit. Remove the stake “E” from
from the tubing “C”.
2. Before putting the stake together together, you will need to turn the solar on. You will locate
the on/off switch on the underside of the metal cup “D”. Push the switch to ON for continuous
operation.
3. Attach the crackle glass “A” to the metal cup “D”; ensuring you use the silicone ring provided
“B”, this keeps the product water tight. You will need to rotate the glass and push at the same time
to attach it securely to the metal cup.
4. To avoid damaging the glass and metal work, install the ground spike “E” into soft ground first,
(see recommendations on positioning before installing into the ground). Once you have chosen
the ideal place for your solar stake, attach the tubing “C” then the top part of the stake
(”A” + “B” + “D”).
Full charge will last up to 6-8 hours per day.
A Bx 4
CDx 4
E x 4
x 4
x 4
Parts List
1. 2. 3.
4.
ON/OFF
