John Lewis Scandi User manual

IL3952
Recommended bulb
1 x 9-11 Watt ES energy efficient LED GLS
or
1 x 42 Watt ES eco halogen GLS
Bulb not included
Specification
Max power: 42W
Voltage: 220~240V, 50Hz
IP20
Weight 10.7Kg
Please retain these instructions for future reference.
This symbol indicates that this product should not be treated as normal house-hold
waste and it should be recycled. John Lewis does not operate in store take back, but
as members of the Distributer Take Back scheme have funded the development and
upgrade of recycling facilities across the UK. Please take it to your nearest collection
facility or for further details contact your local council or visit www.recycle-more.co.uk.
We have taken great care to ensure that this product reaches you in perfect
condition. However, should any parts be damaged or missing please e-mail
[e-mail]
Trouble shooting:
Why is the light not working when switched on?
Check your power supply is switched on
Turn off light and check that the bulb is inserted correctly
Check the bulb is still in working order.
John Lewis partnership
171 Victoria Street
London SW1E 5NN
Johnlewis.com
Made in China
Issue 2 04/18
User manual
Scandi marble
Floor lamp

IL3952
Thank you for purchasing this Scandi marble floor lamp. Please read the instructions
carefully before use to ensure safe and satisfactory operations of this product.
Please keep this instruction for future reference.
Warnings!
The supply cable runs through the inside of this product. Take care not to place
undue stress on the cable whilst unpacking to prevent the possibility of a poor
connection.
If you are in any doubt consult a person competent to give advice on the
assembly of electrical equipment.
If the external flexible cable of the lamp is damaged it shall be exclusively
replaced by the manufacturer or his service agent or a similar qualified person in
order to avoid a hazard.
To prevent electrocution switch off at the mains supply before assembling or
maintaining this fitting. Ensure the plug is not connected to any power supply and
read instructions before assembly.
Always be sure to use the correct type and wattage of bulbs as indicated on the
fitting. Never exceed the wattage stated.
When changing the bulb, always switch off at the mains and allow the old bulb to
cool down before handling. Dispose of used bulbs carefully.
Caution! The bulb and surrounding parts can become hot during use.
For indoor use only.
Care instructions
We recommend cleaning with a soft dry cloth. Do not use abrasive materials as
these will damage the finish.
Replace bulbs from John Lewis or established brand of the same type and
compatibility.
Parts list
Assembly
Ensure fitting is not plugged into the mains supply before assembling or maintaining
this fitting.
Step 1
Unpack the product and remove all packaging. Be
careful not to scratch the surface of the product whilst
removing the wrapping.
Carefully pull any slack cable through the stem until the
upper stem section meets the lower stem.
Insert the upper stem section into the lower stem section
ensuring the holes on the outside of the lower stem are
aligned with the indents on the inside of the upper stem.
Insert the grub screws into the stem and fully tighten
using the hex key provided.
Step 2
Insert the lower stem section into the base stem section
ensuring the indents on the outside of the centre stem
are aligned with the holes on the outside of the base
section. Insert the grub screws into the base section and
tighten using the hex key
provided.
Stand the floor lamp upright
and ensure all the
assembled parts are fully
tightened.
Note: ensure that the lamp head is facing inwards towards the larger area of the
base plate. Incorrect orientation of the floor lamp may adversely affect the stability.
Step 3
To fit shade: Remove the shade ring from lamp holder, fit
the shade and replace shade ring to secure in place.
Take care not to overtighten as this may cause damage
to the fitting.
Fit the bulb, type and wattage as indicated on the
fitting (bulb not supplied). The wattage indicated must
not be exceeded.
Floor lamp is now ready for use.