John Lewis Harmony User manual

Thank you for purchasing this Harmony floor lamp. Please read the instructions and
warnings carefully before use, to ensure safe and satisfactory operation of this product.
Please keep these instructions for future reference.
Warnings!
Parts list
• This product is Class II.
• For your safety, this product must be installed in accordance with local Building Regulations.
If in any doubt, or where required by the law, consult a competent person who is registered
with an electrical self-certification scheme. Further information is available online or from
your Local Authority.
• To prevent electrocution, switch off at the mains supply before installing or maintaining this
fitting. Ensure other persons cannot restore the electricity supply without your knowledge.
• Always use the correct type and rated power bulb. Never exceed the rated power stated.
• When changing a bulb, always switch off at the mains and allow the old bulb to cool down
before handling. Dispose of used bulbs carefully.
• The bulb and surrounding parts can become extremely hot during use. Do not cover
• The supply cord cannot be replaced. If the cord is damaged the product should be disposed
of to avoid a safety hazard
Parts list
A
B
C
Qty
Assembling instructions
Step 1
Place lampshade (B) in the lampholder.
Step 1
Tighten the plastic washer (C) to fix the lampshade (B).
1
1
1

User manual
Harmony
Floor lamp
John Lewis Partnership
171 Victoria Street
London SW1E 5NN
johnlewis.com
Made in Spain
Please retain this information leaflet for future reference.
Recommended bulb
1 x 6W LED bulb
1 x 28W ES halogen bulb.
Specifications
Max. power: 40W
Voltage: 240V, 50Hz
IP rating : IP20
Weight: 12000101 and 12000111 : 8,8 kg
Care and Cleaning.
We recommend cleaning with a soft, dry cloth. Do not use abrasive cleaning materials as
these will damage the finish.
Indor use only.
Replace bulbs from John Lewis or established brand of the same type and compatibility.
Bulb not included