John Lewis BANKERS TABLE LAMP User manual

BANKERS TABLE LAMP
USER GUIDE
Caring for
your product
Indoor use only
Non-Dimmable
Replace bulbs from John Lewis or established brand of the same type and
compatibility
Recommended the fitting should be cleaned with a soft dry cloth.
Aftercare and
Troubleshooting
Why is the light not working when switched on?
Check your power supply is switched on
Turn off light and check that the bulb is inserted correctly
Check the bulb is still in working order.
If you experience any unresolvable technical issues with the product,
contact your nearest John Lewis & Partners shop or John Lewis & Partners
Technical Support on 03301 230106.
Specification
Recommended bulb: SES Candle LED bulb
Rated power: 4W LED Max
Bulb not included
Voltage: 220 –240V, 50Hz
IP rating: 20
Weight: 1.5kg
5 year guarantee
At John Lewis & Partners we test every lightto high quality standards so we are
able to offer you a 5 year guarantee.
Recycling
This symbol
indicates that this product should not be treated as
normal
household waste and it should be recycled. John Lewis & Partners do not
operate instore take back, but as members of the Distributor Take Back
scheme have funded the development and upgrade of recycling facilities
across the UK. Please take it to your nearest collection facility or for further
details contact your local council or visit www.recycle-more.co.uk.
John Lewis Partnership
171 Victoria Street
London SW1E 5NN
johnlewis.com
Made inChina
Please retain these instructions for future reference.

Introduction
Thank you for purchasing this Bankers Table Lamp.
Please read the instructions carefully before use to ensure safe and
satisfactory operation of this product.
Product assembly
1
Step 1
Carefully unpack the carton, making sure all parts
are present before assembly. Place lamp on a flat
surface
Step 2
This is fully assembled product.
Attach the correct type and wattage bulb to the
lamp holder (bulb not included).
The maximum power indicated must not be
exceeded.
Warnings
This fitting should be fitted in accordance with IEE Regulations and the Building
Regulations. If in any doubt, or where required by law, consult a competent
person who is registered with an electrical self-certification scheme. Further
information is available online or from your Local Authority.
Always use the correct type and wattage bulb. Never exceed the wattage stated.
The flexible cable on this luminaire, if damaged, shall only be replaced by the
manufacturer or his service agent or a similar qualified person.
It is the installer’s responsibility to ensure that the fixings and plugs used are suitable
for the surface you are fixing your product on.
Caution! The bulb and surrounding parts can become hot during use.
Do not cover. Keep away from curtains, bedding etc.
Always route mains cable so it does not present a hazard (entrapment, tripping etc.);
Ensure that there are no twists or snags in the cable.
Plug into the mains supply; switch on using the inline cord switch provided.
If moving this lamp, always carry by holding the stand part (and not the glass.)
Parts list
Description
Image
Quantity
A
2
Step 3
Insert the plug into the power supply and turn
on the switch.
01
02