Joie gemm User manual

car seat
gemm
™
0+ (0–13kg)
Instruction Manual
Manual de instruções
Manual de instrucciones
Mode d’utilisateur
Bedienungsanleitung
Handleiding
Manuale di istruzioni
Kullanma kalvuzu
GB
PT
ES
FR
DE
NL
IT
TR

1 2
1
23
16
17
18
19
20
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
4
56
3
2
1
1
2
12
3
2
2
1
3
3
1
A
I
R
B
A
G

3 4
11
9
7
12
10
8
1
21
16
15
13 14
1234
17
1
2

5 6
A
I
R
B
A
G
!
!
!
23
22
24
21
1
3
2
2625
18 19
20

7 8
28 3
1
2
29 30
1
2
31 32
1
2
33 34
27
2
1

910
35
1
36
1
37 38
39 40

11 12
42
41 43 44
45 46

14
GB Welcome to Joie™
Congratulations on becoming part of the Joie family! We are so excited
to be part of your journey with your little one. While traveling with the
Joie GEMM™ car seat you are using a high quality, fully certified safety
Group 0+ infant car seat. This product is suitable for use with children
weighing under 13kg (approximately 1.5 years old or under). Please
carefully read this manual and follow each step to ensure a comfortable
ride and best protection for your child.
Please Confirm
Make sure that your vehicle is equipped with 3-point retractable safety-
belt. Seat belts may be different in design and length according to
maker, manufacturing date, and type of the vehicle. This infant car seat
is only suitable for use in the listed vehicles fitted with 3-point retrac-
tor safety-belts and approved to European Regulation No. 16 or other
equivalent standards.
Base
These instructions show the use of the infant car seat and the base.
Please note that the base is not always included in the purchase of the
product. The base may be sold separately.
! IMPORTANT: KEEP FOR FUTURE REFERENCE. PLEASE READ
CAREFULLY.
Keep this Instruction Manual always with the car seat. If you own a
base, please keep the instruction manual in the storage compartment
at the bottom of the base.
This carseat is approved to European Regulation No. 44, 04 series of
amendments. Please read all the instructions in this manual before
installing and using the product.
Visit us at joiebaby.com to download manuals, see more
exciting Joie products and register your car seat.
Contents
Reference Figures 1 - 12
WARNINGS 15 - 17
Emergency 18
Product Information 18
i. for Seat Only 18
ii. for Seat with Base 19
Parts List 20
Concerns on Installation 20
Aeroplane lnstallation 21
Handle Adjustment 21
Shoulder Harness Position 22
Shoulder Harness Strap Height Adjustment 22
Securing Child in the Infant Car Seat 23
Infant Car Seat Installation 24
i. Installing without Base 24
ii. Installing with Base 25
Use with Strollers 26
i. Use with Joie Strollers 27
Detaching Hood and Seat Pad 28
Care and Maintenance 29
Vehicle Fitting Information 30

15 16
WARNING
!NO Infant car seat can guarantee full protection from injury
in an accident. However, proper use of this Infant car seat
will reduce the risk of serious injury or death to your child.
!This Infant car seat is designed ONLY for child weighing
under 13kg.
!DO NOT use or install this Infant car seat until you read
and understand the instructions in this manual and in
your vehicle owner's manual.
!DO NOT make any modification to this Infant car seat
or use it along with component parts from other
manufacturers.
!DO NOT use this Infant car seat if it has damaged or
missing parts.
!DO NOT have your child in unfitted clothes because
this may prevent your child from being properly and
securely fastened by the shoulder harnesses and the
harnesses between thighs.
!DO NOT leave your car seat or base unsecured in a car.
Your car seat or base must always be secured in the car.
!NEVER leave your child unattended with this Infant car seat
at all times.
!After your child is placed in this Infant car seat, the safety
belt must be used correctly, and make sure the lap
harnesses are right above the child’s pelvis portion.
!Do not place this infant car seat in seating positions where
an active frontal airbag is installed.
!Only use this car seat on vehicle seats with seat backs that
lock in place. Vehicle seats without latches, that fold
forward or pivot freely should not be used.
!NEVER use a second-hand Infant car seat or an Infant car
seat whose history you do not know because they may
have structural damage that endangers your child’s safety.
!NEVER use ropes or any other substitutes in place of
vehicle belt in case of injuries from restraint.
!Please keep this Infant car seat away from sunlight,
otherwise it may be too hot for the child’s skin.
!DO NOT use this Infant car seat without the soft goods.
!DO NOT make any alterations or additions to any part of
the car seat or base. Do not use accessories or parts
supplied by other manufacturers. The function of the car
seat could be altered, resulting in serious injury or death.
!DO NOT use another manufacturer’s insert or base with
this car seat. See your retailer for Joie replacements ONLY.
!DO NOT put unsecured items in the vehicle because they
can be thrown around and may injure occupants in
a sharp turn, sudden stop, or collision.
!DO NOT put anything underneath your infant car seat. In a
crash it could fly out, making the webbing slack and
creating a hazard for other passengers.

17 18
WARNINGS
!Only use this infant car seat on vehicle seats that are fully
padded and are free of sharp objects.
!Note about parts getting caught in door.
!DO NOT continue to use this Infant car seat or base after
they have suffered any violent crash. Replace immediately
as there may be invisible structural damage from the crash.
!Remove this Infant car seat from the vehical seat when it is
not in use for a long period of time.
!Consult the distributor for issues concerning maintenance,
repair and part replacement.
!To avoid the risk that the child may fall, secure the child to
the Infant car seat also when carrying the Infant car seat
by hand.
!Before carrying the Infant car seat by hand, ensure that the
child is fastened with the safety harness, and that the
handle is correctly locked in a vertical position.
!DO NOT use the Infant car seat on the tables, chairs or
other elevated surfaces.
Emergency
In case of emergency or accidents, it is most important to have
your child taken care of with first aid and medical treatment
immediately.
Product Information
i. for Seat Only
2. A correct fit is likely if the vehicle manufacturer has declared
in the vehicle handbook that the vehicle is capable of
accepting a ‘Universal’ child restraint for this age group.
3. This infant car seat child restraint has been classified as
‘Universal’ under more stringent conditions than those which
applied to earlier designs which do not carry this notice.
1.This infant care seat is a ‘Universal’ child restraint. It is
approved to European Regulation No. 44, 04 series of
amendments, for general use in vehicles and it will fit most,
but not all, car seats.

19 20
ii. for Seat with Base
Read all the instructions in this manual before using the
product. If you have any further questions, consult the
distributor directly.
Product Infant Car Seat
Suitable for Child weighing under 13kg
Mass Group Group 0+
Materials Plastics, metal, fabrics
Patent No. Patents pending
The Joie car seat with base are ‘Semi-universal’ child restraint.
They are approved to European Regulation No. 44, 04 series of
amendments, for general use in vehicles and they will fit most,
but not all, car seats. Please see the section ‘Vehicle Fitting
Information’.
Fig. 1.1 Seat Pad
Fig. 1.2 Stroller Fix Release
Button A
Fig. 1.3 Side Guide
Fig. 1.4 Insert
Fig. 1.5 Adjustment Webbing
Fig. 1.6 Harness Adjustment
Button
Fig. 1.7 Shoulder Harness
Fig. 1.8 Hood Mount
Fig. 1.9 Hood
Fig. 1.10 Harness Connectors
Fig. 1.11 Harness Buckle
Parts List
Fig. 1.12 Handle
Fig. 1.13 Handle Button
Fig. 1.14 Rear Guide
Fig. 1.15 Stroller Fix Release
Button B
Fig. 1.16 Lock-off
Fig. 1.17 Shell Indicator
Fig. 1.18 Load Leg Indicator
Fig. 1.19 Load Leg
Adjustment Button
Fig. 1.20 Car Seat Release
Button
Please make sure there are no missing parts. Please contact
the distributor if anything is missing.
Concerns on Installation
!DO NOT install this infant car seat on vehicle seats with
Lap Belt. (Fig. 2)
!This infant car seat is only suitable for vehicle seats with
3-Point Retractor Safety Belts. (Fig. 3)
!DO NOT install this infant car seat on vehicle seats that face
sideward or rearward with respect to the moving direction of
the vehicle. (Fig. 4.1)
!DO NOT install this infant car seat on the front vehicle seat
with airbag in case injuries might happen to the child when
there is an accident. (Fig. 4.2)
!This infant car seat must be installed in the rearward facing
mode. (Fig. 4.3)
!
DO NOT install this infant car seat on unstable vehicle seats
during installation.
!
To know more detailed installation information for seat with
base, please refer to the section ‘Vehicle Fitting Information’.

21 22
Aeroplane lnstallation
!The gemm can only be installed using a lap belt if being
used in an aircraft without the base. Do not install in a
vehicle using a lap belt.
! When being used in an aircraft, the infant car seat must
only be installed rear facing on the seat.
! Gemm car seat width is 435mm, but some aircraft seat
widths are 430mm. For narrow seat, please place padding
under the seat to raise the height and allow it to fit between
the arm rests.
Handle Adjustment
The handle of the infant car seat can be adjusted to 3
positions. (Fig. 5)
Position 1 Position for car, hand or stroller transportation.
Position 2 Rocking position.
Position 3 Baby chair position.
To adjust the handle, squeeze handle buttons on both sides to
release it (Fig. 6.1), and then rotate the handle until it clicks into
any of the 3 positions. (Fig. 6.2)
Shoulder Harness Position
Check that shoulder harnesses are set at the proper height.
Please choose the proper pair of shoulder harness slots
according to the child's height.
!Shoulder harnesses must go into the harness slots nearest
to your baby’s shoulders (Fig. 7), but not above the
shoulder line. (Fig. 8)
!If the shoulder harnesses are not at proper height, the child
might be thrown from the infant car seat when there is
an accident.
Shoulder Harness Strap Height
Adjustment
1.Press the adjustment button at the front of the seat and pull
the shoulder harnesses to loosen them. (Fig. 9)
2.At the back of the seat, take the harness ends off the metal
junction plate. (Fig. 10)
3.Pull the harnesses through the slots in the seat (Fig. 11.1),
insert them into the appropriate set of slots. (Fig. 11.2)
a.Thread the shoulder strap through shoulder harnesses.
b.Thread the shoulder harness anchor through the shoulder
harness slot.
c.Thread the shoulder strap through the shoulder harness slot.
4.Reassemble the harness ends onto the junction plate. (Fig. 12)
! Thread the shoulder strap through the shoulder harness
anchor.(Fig. 12.1)

23 24
!The shoulder harnesses must be placed in back of the
two iron tubes.
!During adjustment, make sure the shoulder harnesses
are not twisted.
!Use extreme care in threading the shoulder harnesses
according to the figure. If the shoulder harnesses are not
secure, they will not protect your baby properly.
Securing Child in the Infant Car Seat
1. While pressing the harness adjustment button, pull
completely the two shoulder harnesses of the infant car seat.
(Fig. 14)
2. Unlock the buckle of the harnesses by pressing the red
button. (Fig.15)
3. There are 2 positions crotch harness adjusted according to
different requirements.
Position 1 Smaller babies use this position (Fig.16.1)
Position 2 Larger babies use this position (Fig.16.2)
i. Pull the crotch harness out and place it to be level.
(Fig.17.1&Fig.17.2&Fig.17.3)
ii. Rotate the crotch harness anchor to make the short side
forwards, then thread it through the crotch harness slot.
(Fig.17.4)
iii.Rethread it through the slot that is closest to child's
crotch from the front of the crotch harness. (Fig. 16)
4. Place child into the infant car seat and lock the buckle.
(Fig. 18 & 19)
5. Tighten the shoulder harnesses by pulling adjustment
webbing. (Fig. 20)
!Make sure the space between the child and the shoulder
harnesses is about the thickness of one hand.
Infant Car Seat Installation
The installation instructions vary depending on whether or not
you are using the base. Please refer to the proper section.
!Do not place the infant car seat on front vehicle seat with
airbag. Death or serious injury can occur. (Fig. 21)
!When using the infant car seat in a vehicle seat, please
adjust the handle to position 1. (Fig. 5.1)
!Face your car seat or base toward the rear of the vehicle.
!Ensure the vehicle safety belt is not loose or twisted.
i. Installing without Base
After fitting the harness to your child and determining which
rear vehicle seat location is best, you are ready to install your
infant car seat.
1. Insert is for infant's protection. Infant weighing under
10kg must use the insert.
2. Before using the insert, please assemble foam. (Fig. 13)
3. After child is placed into the seat, check whether the
shoulder harnesses are at proper height.
Note

25 26
1.Place the infant car seat onto the vehicle seat where you
wish to put it. Pull the vehicle safety belt out and lock it into
the vehicle buckle, sliding the vehicle lap belt into the side
guides of the infant car seat. (Fig. 22)
2.Slide diagonal belt into the rear guide. (Fig. 23)
3.Pull the belt to fasten the infant car seat tightly and securely.
(Fig. 24)
!Tension the vehicle safety belt as much as possible,
check that it is not loose or twisted.
!The vehicle safety belt shall not cause pressure on any
part of the child.
Correctly assembled vehicle safety belt is shown as Fig. 25.
!Lap belt must pass through the two side guides,
as Fig. 25.1.
!The vehicle buckle is locked correctly, as Fig. 25.2
!Diagonal belt must pass through the rear guide,
as Fig. 25.3.
ii. Installing with Base
1.Unfold the load leg from storage compartment. (Fig. 26)
2.After placing the base on the vehicle seat, squeeze load leg
adjustment button to extend the load leg to floor (Fig. 27.1),
the load leg indicator shows green means it is installed
correctly, red means it is installed incorrectly. (Fig. 27.2)
!The load leg has 8 positions. When the load leg indicator
shows red this means the load leg is in the wrong position.
!Make sure the load leg is secure by pressing down on the
front of the base.
3.Open the lock-off and route the vehicle safety belt through
the belt path (Fig. 28.1), and lock it into the buckle (Fig. 28.2),
close the lock-off. (Fig. 28.3)
4.Tighten the vehicle safety belt as much as possible while
pushing down on the base, and check it is not loose or
twisted.
!Check that the safety belt does not move by pulling and
pushing hard on base. If belt loosens or lengthens,
repeat procedure.
The installed base is shown as Fig. 29.
!Please ensure that there is no gap between the seat and
the bottom of the base.
!The safety belt must go under the lock-off (Fig. 29.1),
not over the lock-off. (Fig. 29.2)
5.Push the car seat down into the base (Fig. 30), if the car seat
is secure, the car seat indicator shows green. If the car seat
is not secure, the indicator shows red. (Fig. 31)
!Pull up on the car seat to be sure it is securely latched
into the base.
6.To release the car seat, pull the car seat up while squeezing
the car seat release button. (Fig. 32)
Use with Strollers
Your infant car seat is designed to attach to certain Joie stroller
models featuring a special tray, armbar or calf support.
!Please make sure your stroller can fit the infant car seat
before purchasing it.
!Never allow more than one baby in the travel system
at one time.

27 28
!Please brake your stroller before assembling the
infant car seat.
!Check that the parts used to fix the infant car seat are
securely fastened on the stroller.
!Recline the stroller seat back to the lowest position.
i. Use with Joie Strollers
To assemble the infant car seat on Joie strollers, please
follow these steps:
1.Place car seat into stroller so notches in rockers fit over
edge of armbar, tray or calf support. The car seat will then
automatically click into place. (Fig. 33 & 34 & 35 & 36)
!If armbar has fabric cover, please detach the Velcro on
armbar cover first. (Fig. 35.1)
!For the stroller with a special calf support, please adjust
the calf support to the vertical position, detach the
Velcro, and then lift the fabric cover. (Fig. 36.1)
2.Use the straps on both sides of stroller to fix the car seat.
( Fig. 37 & 38 & 39)
!Try pulling the car seat upwards to check that it is
fitted correctly.
To remove the car seat, release the straps from the car seat,
pull up the stroller release handle to release the car seat from
tray, armbar or calf support, and then lift car seat out of stroller.
Please refer to Fig. 40 & 41 & 42.
Detaching Hood and
Seat Pad
To detach the hood, while pressing the button in the
hood mount, pull the hood bow out. (Fig. 43)
To detach the seat pad, you should refer to the following
steps:
1. You must remove the insert first. To do this simply unlock
the buckle, then unclip the snaps on both sides of the
insert and pull out away from the seat.
2. Remove the crotch pad by detaching the Velcro.
3. You must remove the shoulder harnesses and shoulder
pads. To do this please refer to the section 'Shoulder
Harness Strap Height Adjustment'.
4. Pull out the fastening pieces underneath the edge of the
seat. (Fig. 44)
5. Detach the metal hook from the edge of the car seat, and
then lift it up to seperate the seat pad from the stroller fix
release button A. (Fig. 45)
6. Detach the seat pad from around the adjustment button as
shown in (Fig. 46)
To refit the seat pad simply reverse the steps above, however
make sure that the shoulder harnesses are not crossed over
and not twisted.

3029
Care and Maintenance
!After removing the foam of insert, please store it somewhere
that the child cannot access it.
!Please wash the soft goods with cold water under 30°C.
!Do not iron the soft goods.
!Do not bleach or dry clean the soft goods.
!Do not use undiluted neutral detergent, gasoline or other
organic solvent to wash the infant car seat or base. It may
cause damage to the infant car seat.
!Do not twist the soft goods to dry with great force. It may
leave the soft goods with wrinkles.
!Please hang dry the soft goods in the shade.
!Please remove the infant car seat and base from the vehicle
seat if not in use for a long period of time. Put the infant car
seat in a cool, dry place and somewhere your child cannot
access it.
Vehicle Fitting Information
The Joie car seat with base are classified for “Semi-universal”
use. They are suitable for fixing into the seat positions of the
most cars. The letters on the diagram to the below correspond
with the vehicle fitting positions listed in the following pages.
Seat positions in other cars may also be suitable to accept the
child restraint. If in doubt, consult either the child restraint
manufacturer or the distributor.
ALWAYS give priority to the rear seats of your vehicle.
DO NOT fit your child restraint onto a vehicle seat fitted with an
airbag, unless it can be deactivated.
If your child restraint can be fitted, it is marked with V.
If your child restraint cannot be fitted, it is marked with X.
If your vehicle is not listed in this manual or it is not marked
with either a V or X then please refer to your vehicle’s hand-
book or contact the manufacturer for further information.
A
I
R
B
A
G
2
2
1
3
3
1

Alpha Romeo
147 (2001 - 2009)
159 Saloon (2006 - 2011)
Brera (2006 - 2011)
GT (2004 - 2011)
Guilietta (2010 - 2012)
Mito (2009 - 2011)
Aston Martin
Cygnet (2010 - 2011)
Audi
A1 (2011 - 2012)
A1 Sportback (2012)
A3 (2002)
A3 S3 (2006 - 2011)
A4 (2005 - 2008)
A4 Allroad (2009 - 2011)
A4 Avant (2008 - 2011)
A5 (2007 - 2011)
A5 Sportback (2009 - 2011)
A5 S5 (2007 - 2011)
A6 (2004 - 2011)
A6 S6 (2006 - 2011)
A7 Sportback (2011 - 2012)
A8 (2003 - 2011)
A8 S8 (2006 - 2011)
Q5 (2009 - 2012)
Q7 (2006 - 2011)
TT (1999 - 2006)
Bentley
Please refer to the manufacturer
for further information
BMW
1 Series (2004 - 2011)
1 Series F20 (2011)
3 Series (2005 - 2011)
V
V
V
V
X
V
V
V
V
V
V
V
X
X
V
X
V
V
V
V
V
V
V
V
V
V
V
V
V
V
V
V
X
X
V
X
X
X
V
X
V
X
V
X
V
X
V
X
V
V
X
V
V
V
X
X
V
V
V
V
X
V
V
V
V
V
V
V
X
X
V
X
V
V
V
V
V
V
V
V
V
V
V
V
2
1 3
3 Series F30 (2011)
3 Series M3 (2007 - 2011)
5 Series M5 (2005 - 2011)
5 Series Saloon (2003 - 2010)
6 Series (2004 - 2011)
6 Series M6 (2005 - 2010)
7 Series (2008 - 2011)
X3 (2004 - 2011)
X3 F25 (2011 - 2012)
X5 (2007 - 2011)
X6 (2010 - 2011)
Z4 Coupe (2006 - 2008)
Z4 M (2006 - 2008)
Cadillac
BLS Saloon (2006 - 2011)
Chevrolet
Aveo 3dr (2008 - 2011)
Aveo 5dr (2008 - 2011)
Captiva (2011 - 2012)
Captiva (2006 - 2011)
Cruze (2008 - 2011)
Orlando (2010 - 2012)
Spark (2009 - 2011)
Chrysler
Crossfire (2003 - 2008)
Voyager (2001 - 2008)
300 C (2010 - 2012)
300 C (2004 - 2010)
Delta (2012)
Ypsilon (2012)
Citroen
Berlingo (2009 - 2012)
Berlingo (1998 - 2009)
X
V
V
V
V
V
V
V
V
V
V
V
V
V
V
V
V
V
V
V
X
X
V
V
V
V
X
V
V
V
X
V
V
V
X
X
V
X
X
X
V
V
V
V
V
V
V
X
V
V
V
V
V
V
V
X
V
V
V
V
V
V
V
V
V
V
V
V
V
V
V
V
V
V
V
X
X
V
V
V
V
2
1 3

33 34
C-Crosser (2007 - 2012)
C-Zero (2011 - 2012)
C1 (2005 - 2011)
C2 (2003 - 2009)
C3 (2009 - 2012)
C3 (2002 - 2009)
C3 Picasso (2009 - 2011)
C3 Pluriel (2003 - 2010)
C4 (2010 - 2012)
C4 (2004 - 2010)
C4 Picasso (2007 - 2011)
Grand C4 Picasso (2007 - 2011)
C5 (2004 - 2008)
C6 (2006 - 2011)
C8 (2003 - 2010)
DS3 (2010 - 2011)
DS4 (2011 - 2012)
Nemo Multispace (2009 - 2011)
Xsara Picasso (2000 - 2009)
Daewoo
Please refer to the manufacturer
for further information
Daihatsu
Charade (2003 - 2007)
Copen (2002 - 2012)
Materia (2007 - 2010)
Sirion (2005 - 2010)
Terios (2006 - 2010)
Dodge
Please refer to the manufacturer
for further information
Ferrari
Please refer to the manufacturer
for further information
V
V
V
V
V
V
V
V
V
V
X
V
V
V
V
V
V
V
V
V
V
V
V
V
V
V
V
V
V
V
V
V
V
V
V
V
V
V
X
X
V
V
V
X
V
V
V
V
V
V
V
V
V
V
V
V
V
X
V
V
V
V
V
V
V
V
V
V
V
V
2
1 3
Fiat
500 (2008 - 2011)
500 C (2009 - 2011)
Abarth 500 (2009 - 2011)
Bravo (2007 - 2011)
Doblo (2001 - 2010)
Linea (2007 - 2012)
Multipla (2000 - 2010)
Panda (2012)
Panda (2004 - 2011)
Punto (2003 - 2006)
Grande Punto (2006 - 2010)
Abarth Grande Punto (2008 - 2011)
Sedici (2006 - 2011)
Ulysse (2003 - 2005)
Ford
CMax (2003 - 2012)
Fiesta (2008 - 2011)
Fiesta (2002 - 2008)
Focus (2010 - 2011)
Focus (2005 - 2011)
Focus CMax (2012)
Focus CMax (2003 - 2010)
Fusion (2002 - 2011)
Galaxy (2006 - 2011)
KA (1996 - 2008)
KA 2010 (2009 - 2011)
Kuga (2008 - 2011)
Mondeo Estate (2007 - 2011)
Mondeo MKIV (2007 - 2011)
Mondeo Saloon (2000 - 2007)
SMax (2006 - 2011)
Honda
Accord (8) (2003 - 2008)
V
V
V
X
X
V
V
V
V
V
V
V
V
V
X
V
V
V
V
V
X
V
X
V
V
X
X
V
V
X
V
X
V
V
X
X
V
V
X
X
V
X
V
V
V
X
V
V
V
V
V
X
V
X
V
X
X
V
V
V
X
V
V
V
V
X
X
V
V
V
V
V
V
V
V
V
X
V
V
V
V
V
X
V
X
V
V
X
X
V
V
X
V
2
1 3

35 36
Accord Saloon (2008 - 2011)
Civic (2012)
Civic (2006 - 2011)
Civic Hybrid Saloon (2006 - 2010)
CRV 3rd Gen (2001 - 2006)
CRV (2007 - 2011)
CRZ (2009 - 2012)
FRV (2006 - 2011)
Insight (2009 - 2011)
Jazz (2008 - 2011)
Jazz (2002 - 2008)
Hyundai
Accent (2006 - 2009)
Amica (2006 - 2009)
Coupe / Tuscani (2001 - 2009)
Getz (2002 - 2009)
I10 Hatchback (2008 - 2012)
I20 Hatchback (2009 - 2012)
I30 (2007 - 2012)
I40 (2011 - 2012)
IX35 (2010 - 2012)
Matrix (2001 - 2010)
SantaFe (2006 - 2011)
SantaFe (2001 - 2005)
Trajet (2000 - 2006)
Tucson (2004 - 2009)
Infiniti
Please refer to the manufacturer
for further information
Jaguar
S-Type (1999 - 2007)
X-Type (2001 - 2010)
XF (2008 - 2011)
XF R (2009 - 2011)
X
X
V
V
V
V
V
V
X
V
V
V
V
V
V
V
V
V
X
X
V
V
V
V
V
V
X
V
V
X
X
X
V
V
V
X
X
X
X
V
V
V
X
V
X
X
X
X
X
V
V
V
V
V
X
X
X
X
X
X
V
V
V
V
V
V
X
V
V
V
V
V
V
V
V
V
X
X
V
V
V
V
V
V
X
V
V
2
1 3
XJ (2003 - 2009)
XJ R (2003 - 2008)
XK (2006 - 2011)
XK R (2006 - 2011)
Jeep
Cherokee (2001 - 2007)
Cherokee 2008 (2008 - 2010)
Grand Cherokee (2005 - 2011)
Compass (2006 - 2012)
Patriot (2007 - 2011)
Kia
Carens (2000 - 2006)
Ceed Hatchback (2012)
Cerato (2004 - 2006)
Optima (2012)
Picanto (2004 - 2011)
Rio (2012)
Rio (2005 - 2011)
Rio 2nd Gen (2005 - 2011)
Sedona (2006 - 2011)
Sedona 2nd Gen (1999 - 2006)
Sorento (2003 - 2009)
Sportage (2005 - 2010)
Land rover
Defender (1983 - 2012)
Defender 2007 (1983 - 2011)
Discovery (2004 - 2009)
Discovery 4 (2009 - 2012)
Freelander (2006 - 2011)
Freelander 2 (2006 - 2011)
Freelander Hardback (2003 - 2006)
Freelander Softback (2003 - 2006)
Range Rover (2002 - 2012)
Range Rover Sport (2005 - 2012)
V
V
V
V
V
V
V
V
V
V
V
V
X
V
V
V
V
V
V
V
V
V
V
V
X
V
X
V
V
X
V
X
X
X
X
V
V
V
V
V
V
X
V
X
V
V
V
V
V
V
V
V
X
V
X
X
V
V
V
V
X
X
V
V
V
V
V
V
V
V
V
V
V
V
X
V
V
V
V
V
V
V
V
V
V
V
X
V
X
V
V
X
V
2
1 3

37 38
Range Rover Evoque (2011 - 2012)
Lotus
Please refer to the manufacturer
for further information
Lexus
GS 300 (2005 - 2012)
IS Saloon (2005 - 2011)
RX 350 (2003 - 2009)
Lambourghini
Please refer to the manufacturer
for further information
Maserati
Please refer to the manufacturer
for further information
Mazda
BT-50 (2011 - 2012)
BT-50 (2006 - 2011)
CX-5 (2011 - 2012)
CX-7 (2007 - 2011)
2 (2007 - 2011)
2 (2003 - 2007)
3 (2004 - 2008)
3 Hatchback (2009 - 2011)
3 2007 (2004 - 2008)
5 (2005 - 2010)
6 (2002 - 2007)
6 2008 (2007 - 2011)
6 Hatchback (2007 - 2012)
MX-5 (1990 - 2005)
RX-8 (2003 - 2010)
Mercedez Benz
A Class (2005 - 2012)
B Class (2012)
V
V
V
V
V
V
V
V
V
V
V
V
V
X
V
V
V
V
V
V
X
X
X
V
X
X
X
X
V
V
V
X
V
V
V
X
X
X
X
X
X
V
V
V
V
V
V
V
V
V
V
V
V
V
X
V
V
V
V
V
V
2
1 3
B Class (2005 - 2011)
C Class (2008 - 2012)
C Class (2000 - 2007)
C Class Estate (2008 - 2012)
C Class Sports Coupe (2001 - 2008)
CLK (2002 - 2009)
CLS (2002 - 2009)
E Class Coupe (2009 - 2011)
E Class Estate (2009 - 2012)
E Class Saloon (2002 - 2008)
GL Class (2006 - 2012)
ML Class (2005 - 2012)
R Class (2006 - 2012)
S Class (2006 - 2012)
SL Class (2002 - 2011)
SLK Roadster (2004 - 2011)
MG
Please refer to the manufacturer
for further information
Mini
Mini Hatchback (2006 - 2011)
Mini Convertible (2006 - 2012)
Mini Convertible (2004 - 2008)
Mini Coupe (2009 - 2011)
Mini Cooper (2001 - 2006)
Mini Cooper S (2002 - 2006)
Mini Countryman (2010 - 2011)
Mitsubishi
Colt (2004 - 2011)
Grandis (2004 - 2010)
L200 (2010 - 2012)
Miev (2009 - 2012)
Lancer (2008 - 2011)
Lancer (2005 - 2008)
V
V
V
V
V
V
V
V
V
V
V
V
X
V
V
X
V
V
V
V
X
V
V
V
V
V
V
V
X
X
X
X
X
X
X
X
X
X
X
V
X
X
X
X
X
X
V
X
X
V
V
V
X
V
X
X
V
V
V
V
V
V
V
V
V
V
V
V
X
V
V
X
V
V
V
V
X
V
V
V
V
V
V
2
1 3