JUMO LOGOSCREEN nt User manual

JUMO LOGOSCREEN nt
Paperless recorder with TFT display,
CompactFlash card, and
USB interfaces
B 706581.1
Operating Instructions
2014-05-22/00504667

Menu structure of the paperless recorder
vChapter 8 "Device Manager"
vChapter 7 "Memory Manager"
vChapter 6 "Alarm and Event Lists"
vChapter 4 "Visualization"
vChapter 5 "Memory Presentation (History)"
New device functions
The device software version 187.03.xx is replaced by version 187.04.xx. The following ad-
ditional functions are available with the new version:
-additionalhorizontalrecorderimage;applicable for curve presentation, for binary pre-
sentation, for display of a closed batch, and for memory presentation
-Expansionoftheexternalinputs from 24 to 54
-Expansionoftheexternaltextsfrom9to27
- Time synchronization through SNTP
-Newwebserver
- Modbus slave monitoring (timeout monitoring)
The device software can be checked in the menu Device manager Device info Ver-
sion SW version.

Contents
1Introduction 7
1.1 Preface ........................................................................................................ 7
1.2 Arrangement of the Documentation ........................................................ 8
1.3 Typographical Conventions .................................................................... 10
2 Instrument Description 13
2.1 Displays and Controls ............................................................................. 15
3OperatingPrinciple 19
3.1 Operating Principle and Graphic Elements ........................................... 19
3.2 Operating Example .................................................................................. 24
3.3 Group and Plant Management (Batches) ............................................... 26
4Visualization 29
4.1 Activating the Operator Level ................................................................. 29
4.2 Overview of Header Lines ....................................................................... 30
4.3 Curve Presentation .................................................................................. 31
4.3.1 Vertical presentation .................................................................................. 31
4.3.2 Horizontal presentation .............................................................................. 32
4.4 Bar Graph Presentation ........................................................................... 33
4.5 Text Picture Presentation ........................................................................ 34
4.6 Process Image Presentation ................................................................... 35
4.7 Binary diagram presentation .................................................................. 35
4.7.1 Vertical presentation .................................................................................. 36
4.7.2 Horizontal presentation .............................................................................. 36
4.8 Reports ..................................................................................................... 37
4.9 Batches/Plants ......................................................................................... 38
4.9.1 Current Batches ......................................................................................... 38
4.9.2 Completed Batches ................................................................................... 40
4.9.3 Batch Control with Barcode Reader .......................................................... 41
4.10 Counters and Integrators ........................................................................ 44
4.11 Comment Entry ........................................................................................ 45

Contents
5MemoryPresentation(History) 47
5.1 Vertical presentation ................................................................................ 48
5.2 Horizontal presentation ........................................................................... 50
6 Alarm and Event Lists 51
6.1 Call from One of the Visualization Modes ............................................. 52
6.2 Call from the Memory Presentation ....................................................... 54
6.3 Symbols .................................................................................................... 54
7MemoryManager 55
8DeviceManager 59
8.1 Close Device Manager ............................................................................ 60
8.2 Log-in and Log-out .................................................................................. 60
8.3 Device information ................................................................................... 62
8.4 Device Audit Trail ..................................................................................... 67
8.5 Configuration ............................................................................................ 68
8.6 Parameterization ...................................................................................... 68
8.7 Service ...................................................................................................... 69
9 Entering text and values 71
9.1 Text entry .................................................................................................. 71
9.1.1 Entering characters .................................................................................... 71
9.1.2 Insert spaces ............................................................................................. 73
9.1.3 Delete character ......................................................................................... 73
9.1.4 Move cursor ............................................................................................... 73
9.1.5 Enter text from text list ............................................................................... 73
9.1.6 Finish entry ................................................................................................ 73
9.1.7 Reject entry ................................................................................................ 74
9.2 Entry via selection field ........................................................................... 74
9.3 Entering values ......................................................................................... 75
9.3.1 Whole numbers (integers) .......................................................................... 75
9.3.2 Real numbers (floating point) ..................................................................... 76

Contents
10 Web server 77
10.1 General ...................................................................................................... 78
10.2 Online Visualization (All Visualizations Except Batches) ...................... 81
10.3 Three freely programmable HTML pages .............................................. 83
10.4 Online Visualization of Current Batch Reports ..................................... 84
10.5 QuadView .................................................................................................. 85
10.6 General information ................................................................................. 88
10.7 Online visualization (all visualizations other than batches) ................. 90
10.8 Online visualization of the current batch reports ................................. 91
10.9 QuadView .................................................................................................. 92
11 Appendix 95
11.1 Bar code ................................................................................................... 95
11.1.1 Batch control ............................................................................................. 95
11.1.2 Batch texts ................................................................................................. 96
12 Index 99

Contents

7
1 Introduction
1.1 Preface
Please read this manual before commissioning the instrument. Keep the
instructions in a place which is accessible to all users at all times.
Please assist us in improving these instructions where necessary.
Your comments will be appreciated.
H
If any difficulties should arise during commissioning, you are asked
not to carry out any manipulations that could endanger your rights
under the instrument warranty!
Please contact the nearest subsidiary or the head office in such a
case.
E
When returning modules, assemblies or components, the
regulations of EN 61340-5-1 and EN 61340-5-2 “Protection of
electronic devices from electrostatic phenomena” must be
observed. Use only the appropriate ESD packaging for transport.
Please note that we cannot accept any liability for damage caused
by ESD.
ESD = Electro Static Discharge
B

1 Introduction
8
1.2 Arrangement of the Documentation
The documentation for this instrument is addressed to equipment
manufacturers (OEMs) and users with appropriate technical expertise. It
consists of the following parts:
Instrument documentation in printed form
B 706581.1 Operating instructions
The operating instructions are an extract from the operating manual and cover
the basic operation of the paperless recorder.
B 706581.4(.1) Installation instructions
The installation instructions describe the installation of the recorder and the
connection of the supply and signal cables. The instructions also contain a list
of the technical data.
B 706581.4 Installation instructions for recorder with zinc die-cast panel
B 706581.4.1 Installation instructions for recorder with stainless steel panel
Instrument documentation in the form of PDF files
The “Instrument documentation in the form of PDF files” is on the CD that is
included in the delivery.
B 706581.0 Operating manual
It contains information about commissioning, operation and parameterization
on the instrument, as well as about the setup program (available as an option).
B 706581.1 Operating instructions
The operating instructions are an extract from the operating manual and cover
the basic operation of the paperless recorder.
B 706581.2.0 Interface description (serial interfaces)
This provides information on communication (RS 232/RS 485) with
supervisory systems.
Interface description (Ethernet interface)
This provides information on the connection of a paperless recorder to a
company-internal network. This description is integrated into B 706581.2.0.
B 706581.2.3 Interface description (PROFIBUS-DP interface)
This provides information on the connection of a paperless recorder to a
PROFIBUS-DP system.

9
1 Introduction
B 706581.4(.1) Installation instructions
The installation instructions describe the installation of the recorder and the
connection of the supply and signal cables. The instructions also contain a list
of the technical data.
B 706581.4 Installation instructions for recorder with zinc die-cast panel
B 706581.4.1 Installation instructions for recorder with stainless steel panel
B 706581.6 Setup program
These instructions describe the functions of the setup program. The setup
program is available as an accessory.
T 706581 Data sheet
The data sheet contains general information, the order details and, technical
data.
B 709701.0 PC evaluation software PCA3000
The operating manual describes the operation and the features of the PC
evaluation software.
The PC evaluation software serves to visualize and evaluate process data
(measurement data, batch data, messages ...). The process data can be read
in via the CompactFlash memory card, or made available through the PCC
software.
B 709702.0 PCA communications software PCC
The operating manual describes the operation and features of the PCA
Communications software.
The PCA Communications software is responsible for the data transfer from
the paperless recorder to a PC, or across a network.
Internet
H
All documents are available for
downloading at www.jumo.net
hStart the product search on the home page.
hEnter 706581 and start the search.
hSelect the paperless recorder.
hSelect the download section.
hDownload the PDF file.

1 Introduction
10
1.3 Typographical Conventions
Warning signs
The signs for Danger and Caution are used in this manual under the following
conditions:
V
Danger
This symbol is used when there may be danger to personnel if the
instructions are ignored or not followed correctly!
A
Warning
This symbol is used when there may be damage to equipment or data if the
instructions are ignored or not followed correctly!
E
Warning
This symbol is used where special care is required when handling
components liable to damage through electrostatic discharge.
Note signs
H
Note
This symbol is used when your special attention is drawn to a remark.
v
Reference
This symbol refers to further information in other manuals, chapters or
sections.
h
Action instruction
This symbol indicates that an action to be performed is described.
The individual steps are marked by this asterisk, e.g.
hRotate control knob
hPress control knob