manuals.online logo
Brands
  1. Home
  2. •
  3. Brands
  4. •
  5. JUMO
  6. •
  7. Transmitter
  8. •
  9. JUMO 907021/30 User manual

JUMO 907021/30 User manual

Hygro-/Hygrothermogeber
Wand- und Kanalausführung Humidity-/Humidity Temperature
Transmitter for wall or duct mounting
907021/20
907021/20
907021/30
907021/30 907021/20
907021/20
907021/30
907021/30
ALLGEMEIN:
Diese Messumformer sind für die exakte Erfassung von Feuchte und Temperatur bestimmt.
Ein kapazitiver Sensor wird als Messelement für die Feuchtemessung verwendet.
Das Gehäuse ist für die direkte Wand- oder Kanalmontage geeignet.
Mit dem Montageflansch ist eine stufenlose Änderung der Eintauchtiefe bei der Kanalmontage möglich.
Bei Freiluftanwendungen ist der Einsatz eines Strahlungsschutzes erforderlich.
Bei Sonderanwendungen wenden Sie sich bitte an den Hersteller oder an Ihren zuständigen Händler.
ACHTUNG:
Extreme mechanische und unspezifizierte Beanspruchungen sind unbedingt zu vermeiden.
Bei Verwendung des Sinterfilters:
Beim Sensorelement handelt es sich um ein ESD gefährdetes Bauteil, d.h. Berührungen des Filters während des
Betriebs sind zu unterlassen. Bei Wartungsarbeiten sind die einschlägigen ESD-Schutzmaßnahmen einzuhalten.
TECHNISCHE DATEN:
Ausgang 0...100 %r.F. 0-1/5/10 V 4-20 mA
T-Ausgang lt. Bestellung 0-1/5/10 V 4-20 mA
min. Lastwiderstand 2/5/10 kOhm
max. Bürde 500 Ohm
Spannungsversorgung SELV
für 0 - 1 V 10 - 35 VDC 9 - 29 VAC
für 0 - 5 V 12 - 35 VDC 12 - 29 VAC
für 0 - 10 V 15 - 35 VDC 15 - 29 VAC
für 4 - 20 mA 20 - 35 VDC (RL<500 Ohm); 11 - 35 VDC (RL<50Ohm)
Stromverbrauch < 15 mA für Spannungsausgang
Elektromagnetische Verträglichkeit EN 61000-6-2 ÖVE EN 61326-1+A1+A2
EN 61000-6-3
Temperaturbereiche Fühler -40...+60°C Messkopf bis 80°C
Elektronik -40...+60°C
Lagerung -25...+60°C
Gehäuse / Schutzart PC / IP65
Genauigkeit Feuchte: ± 2% rF (0...90%) ± 3% rF (90...100%)
Temperatur: ± 0,2°C bei 20°C
SELBSTHILFE bei FEHLERN:
Fehler mögliche Ursache Maßnahme
unrealistische Werte nicht optimale Montage Achten Sie darauf, dass der Fühlerkopf die gleiche
Temperatur wie die zu messende Luft besitzt. Bei
Freilandanwendung - Strahlungsschutz verwen-
den! Für die Überprüfung der Ausganswerte
stehen Test Kits zur Verfügung.
zu langeAnsprechzeit Verschmutzung des Filters Filtertausch
Falsche Filtertype Filtertype auf die Anwendung anpassen
Ausfall des Gerätes keine Versorgungsspannung Zuleitung und Versorgungsspannung überprüfen
zu hohe Feuchtewerte Betauung im Fühlerkopf Fühlerkopf trocknen; evtl. Filterkappe wechseln
GENERAL:
These transmitters are designed to measure humidity and temperature.
They use a capacitive sensor element for the humidity measurement.
The housing is available for both wall mounting or duct mounting.
With the provided mounting device for the duct mounting version the penetration depth is infinitely adjustable.
For outdoor applications we recommend to use a radiation shield.
For special applications do not hesitate to contact the manufacturer or the corresponding distributor.
ATTENTION:
Absolutely avoid extreme mechanical and unspecified strain.
When unit is equipped with sinter-filter:
Since sensor-element is an ESD-sensitive device, you should avoid touching the sensor cap during operation.
For maintenance purposes it is recommended, that you observe the valid ESD-safety precautions!
TECHNICAL DATA:
output appropriate 0...100%RH 0-1/5/10 V 4-20 mA
T-output according to order 0-1/5/10 V 4-20 mA
min. load resistance 2/5/10 kOhm
max. burden 500 Ohm
supply voltage SELV
for 0 - 1 V 10 - 35 VDC 9 - 29 VAC
for 0 - 5 V 12 - 35 VDC 12 - 29 VAC
for 0 - 10 V 15 - 35 VDC 15 - 29 VAC
for 4 - 20 mA 20 - 35 VDC (RL<500 Ohm); 11 - 35 VDC (RL<50Ohm)
supply current < 15 mA
electromagnetic compatibility EN 61000-6-2 ÖVE EN 61326-1+A1+A2
EN 61000-6-3 FCC Part15 ClassB ICES-003 ClassB
temperature range probe: -40...+60°C (-40...+140°F) measuring head up to 80°C (176°F)
electronic: -40...+60°C (-40...+140°F)
storage: -25...+60°C (-13...+140°F)
housing / protection class PC / IP65; Nema 4
Accuracy humidity: ± 2% RH (0...90%) ± 3% RH (90...100%)
temperature: ± 0.2°C (± 0.36°F) at 20°C (68°F)
SELF-HELP for APPEARING ERRORS:
error possible cause remedies
unrealistic values wrong installation Please take care that the ambient temperature of the
transmitter is the same like the measuring temperature.
For outdoor applications use a radiation shield. For
rechecking the humidity calibration we suggest to use
our Humidity Test-Kits.
long response time pollution of the filter change filter cap
wrong filter type adjust filter type to application
complete failure of instrument no power supply check supply cable and supply voltage
humidity values too high bedewing of the sensor probe dry the sensor probe and if necessary replace the filter
BA_907021_2030_03 // Technische Änderungen vorbehalten; 14.02.2005 // 302307 technical data are subject to change
Die Bedienungsanleitung zur Feuchtekalibration ist auf www.jumo.net verfügbar.
The manual for humidity calibration is available under www.jumo.net
La notice d'instructions pour la recalibration est disponible sur www.jumo.net
i
USA / FCC notice: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installa-
tion. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the installation manual, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur
in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna. - Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. - Consult the dealer or an experienced radio/TV technician for help.
Caution: Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate this device.
CANADIAN / ICES-003 notification:This Device B digital apparatus complies with Canadian ICES-003. Cet appareil numérique de classe B est conforme à la norme canadienne NMB-003.
Klemmbelegung / Connection of the screw terminal / Câblage électrique
Snap In - Variante / snap in - model /clip de fixation
Montageflansch / mounting flange / bride de fixation
Wandmontage /
wall mounting /
montage mural
Kanalmontage /
duct mounting /
montage gaine
Steckerbelegung / connector pin list / cablâge connecteur
power supply
for 0 - 1V: 10 - 35V DC
9 - 29V AC
for 0 - 5V: 12 - 35V DC
15 - 29V AC
for 0 -10V: 15 - 35V DC
15 - 29V AC
power supply
20...35V DC; RL< 500 Ohm
11...35V DV; RL< 50 Ohm
907021/20-2-x-065/051/057
907021/30-2-x-065/051/057 907021/20-1-x-065/051/057
907021/30-1-x-065/051/057
907021/20-2-x-005
907021/30-2-x-005
power supply
for 0 - 1V: 10 - 35V DC
9 - 29V AC
for 0 - 5V: 12 - 35V DC
15 - 29V AC
for 0 -10V: 15 - 35V DC
15 - 29V AC
power supply
20...35V DC; RL< 500 Ohm
11...35V DV; RL< 50 Ohm
V+ = Versorgungsspannung / supply voltage / alimentation
GND = Masse / ground / masse
RH = Ausgang Feuchte / humidity output / sortie humidité
T = Ausgang Temperatur / temperature output / sortie température
JUMO GmbH & Co. KG
Hausadresse: Moltkestraße 13 - 31, 36039 Fulda, Germany
Lieferadresse: Mackenrodtstraße 14, 36039 Fulda, Germany
Postadresse: 36035 Fulda, Germany
Telefon: +49 661 6003-722/724
Telefax: +49 661 6003-601/688
E-Mail: [email protected]
Internet: www.jumo.net
Transmetteur humidite relative/temperature
montage mural et montage gaine
907021/20
907021/20
907021/30
907021/30
Généralités :
Les transmetteurs sont conçus pour la mesure de la température et de l'humidité relative.
La mesure de l'humidité relative est réalisée avec un capteur capacitif. Le boîtier est disponible pour un
montage mural ou sur gaine. Un réglage de la profondeur d'insertion des sondes de gaine est possible avec
la bride de montage. Pour une utilisation en extérieur nous préconisons l'utilisation d'une protection à radi-
ation. Pour une application particulière n'hésitez pas à consulter le constructeur ou votre distributeur local.
ATTENTION :
Eviter de solliciter l'appareil à des efforts mécaniques ou à une utilisation non spécifiée.
En cas d'utilisation du filtre inox fritté :
Un risque d'électricité statique existe au niveau de l'élément sensible. Ne pas manipuler le filtre pendant le
fonctionnement de l'appareil. Dans le cas d'une maintenance ou d'un entretien, utiliser les protections
nécessaires à la manipulation de composants comportant des risques de décharges électrostatiques.
DONNÈES TECHNIQUES:
Sorties pour 0-100%HR; Sortie température 0-1/5/10 V 4-20 mA
selon référence commandée 0-1/5/10 V 4-20 mA
Impédance minimum 2/5/10 kOhm
Résistance de chage max. 500 Ohm
Tension d'alimentation
pour 0 - 1 V 10 - 35 VDC 9 - 29 VAC
pour 0 - 5 V 12 - 35 VDC 12 - 29 VAC
pour 0 - 10 V 15 - 35 VDC 15 - 29 VAC
pour 4 - 20 mA 20 - 35 VDC (RL<500 Ohm); 11 - 35 VDC (RL<50Ohm)
Consommation < 15 mA
Compatibilité électromagnétique EN 61000-6-2 ÖVE EN 61326-1+A1+A2
EN 61000-6-3 FCC Part15 ClassB ICES-003
Gamme de température sonde -40...+60°C tête de mesure: 80°C
électronique -40...+60°C
stockage -25...+60°C
Boîtier / Indice de protection PC / IP65
Incertitude humidité: ± 2% HR (0...90%) ± 3% HR (90...100%)
température: ± 0.2°C à 20°C
BOÎTIER/INDICE DE PROTECTION:
Défauts Origine possible Remèdes
Valeurs Pas de montage Veillez à maintenir une température identique
incohérentes optimal entre le capteur et l'ambiance à mesurer. En
utilisation extérieur, utiliser une protection à
radiation. Pour la vérification de la valeur de
sortie des kits sont à votre disposition.
Temps de réponse Encrassement du filtre Changer le filtre
trop long Mauvais type de filtre Adapter le type de filtre à votre application
Défaut de l'appareil Pas d'alimentation Vérifier le câblage et l'alimentation
Valeur d'humidité Condensation dans la Sécher la tête de mesure, changer
trop élevée tête de mesure éventuellement le filtre
907021/20-1-x-005
907021/30-1-x-005
Abmessungen / Dimensions / Montage mécanique
1 mm = 0.03937” / 1” = 25.4 mm
Gewicht: Ausführung Wandmontage / self-weigth: wall mounting type / masse: version murale: 0,105kg (0.231 lbs)
Gewicht: Ausführung Kanalmontage / self-weight: duct mounting type / masse: version gaine: 0,134kg (0.295 lbs)
m
mm

This manual suits for next models

1

Other JUMO Transmitter manuals

JUMO ecoTRANS Lf 01 User manual

JUMO

JUMO ecoTRANS Lf 01 User manual

JUMO 40.2005 User manual

JUMO

JUMO 40.2005 User manual

JUMO dTRANS p02 User manual

JUMO

JUMO dTRANS p02 User manual

JUMO 404304 Series User manual

JUMO

JUMO 404304 Series User manual

JUMO dTRANS T03 J User manual

JUMO

JUMO dTRANS T03 J User manual

JUMO dTRANS T02 PCP User manual

JUMO

JUMO dTRANS T02 PCP User manual

JUMO B 707025.0 User manual

JUMO

JUMO B 707025.0 User manual

JUMO CTI-750 User manual

JUMO

JUMO CTI-750 User manual

JUMO TAROS S47 P User manual

JUMO

JUMO TAROS S47 P User manual

JUMO MIDAS S22 Ex User manual

JUMO

JUMO MIDAS S22 Ex User manual

JUMO dTRANS p02 User manual

JUMO

JUMO dTRANS p02 User manual

JUMO AQUIS 500 pH User manual

JUMO

JUMO AQUIS 500 pH User manual

JUMO SIRAS P21 AR User manual

JUMO

JUMO SIRAS P21 AR User manual

JUMO B 90.7027.1 User manual

JUMO

JUMO B 90.7027.1 User manual

JUMO dTRANS T01 HART User manual

JUMO

JUMO dTRANS T01 HART User manual

JUMO 907021/10 User manual

JUMO

JUMO 907021/10 User manual

JUMO dTRANS T02j User manual

JUMO

JUMO dTRANS T02j User manual

JUMO dTRANS T02 LCD User manual

JUMO

JUMO dTRANS T02 LCD User manual

JUMO MIDAS S21 Ex User manual

JUMO

JUMO MIDAS S21 Ex User manual

JUMO dTRANS T09 AS User manual

JUMO

JUMO dTRANS T09 AS User manual

JUMO JUMO dTRANS p20 DELTA User manual

JUMO

JUMO JUMO dTRANS p20 DELTA User manual

JUMO 907021/10 User manual

JUMO

JUMO 907021/10 User manual

JUMO DELOS SI User manual

JUMO

JUMO DELOS SI User manual

JUMO 4AP-30 User manual

JUMO

JUMO 4AP-30 User manual

Popular Transmitter manuals by other brands

Honeywell ADEMCO 5878 Installation and setup guide

Honeywell

Honeywell ADEMCO 5878 Installation and setup guide

FineTek EAX30400-C Operation manual

FineTek

FineTek EAX30400-C Operation manual

Kyosho PERFEX KT-100 instruction manual

Kyosho

Kyosho PERFEX KT-100 instruction manual

Evikon PluraSens E2608-Cl2 user manual

Evikon

Evikon PluraSens E2608-Cl2 user manual

Marmitek Stream S2 Pro quick start guide

Marmitek

Marmitek Stream S2 Pro quick start guide

IDTOLIGHT NASHVILLE installation instructions

IDTOLIGHT

IDTOLIGHT NASHVILLE installation instructions

Dynisco IPX II Series operating manual

Dynisco

Dynisco IPX II Series operating manual

Ko Propo EX-10 EURUS instruction manual

Ko Propo

Ko Propo EX-10 EURUS instruction manual

Ecreso HELIOS Series user manual

Ecreso

Ecreso HELIOS Series user manual

Hama AT-802 Operating	 instruction

Hama

Hama AT-802 Operating instruction

PR electronics PRetop 5334 manual

PR electronics

PR electronics PRetop 5334 manual

Genie Intellicode II Series instructions

Genie

Genie Intellicode II Series instructions

Risco WL 132KF1 manual

Risco

Risco WL 132KF1 manual

Ashcroft ZX11 Series Installation and maintenance instructions

Ashcroft

Ashcroft ZX11 Series Installation and maintenance instructions

Honeywell STT850 SMARTLINE user manual

Honeywell

Honeywell STT850 SMARTLINE user manual

Rf-t Safe Place Mother user guide

Rf-t

Rf-t Safe Place Mother user guide

Audio Ltd. HX2040 user guide

Audio Ltd.

Audio Ltd. HX2040 user guide

SVP UDT-70 manual

SVP

SVP UDT-70 manual

manuals.online logo
manuals.online logoBrands
  • About & Mission
  • Contact us
  • Privacy Policy
  • Terms and Conditions

Copyright 2025 Manuals.Online. All Rights Reserved.