keilhauer Elite User manual

Elite
1450 Birchmount Road, oronto, Ontario, Canada M1P 2E3
tel [phone] fax [phone] 724 5665
www.keilhauer.com [e-mail]
©COPYRIGH KEILHAUER 2004

1. ilting Adjustment
(Swivel Knee ilt -5)
Use this
(to lock or unlock tilt)
he tilting of the chair is controlled by the lever located under the
left side of the chair near the front of the seat.
To lock the tilting mechanism (upright position only) lean slightly
forward in the chair and push the lever in or to the right.
To unlock the tilting mechanism pull the level out to the left.
hese adjustments can be made while seated.

3. Height Adjustment
(Manual adjustment)
he height of the chair is adjusted manually by an upright threaded
column located between the 5 leg base and the chair.
To raise the chair height, turn the oversize cap on the column
clockwise.
To lower the chair height, turn the cap counter clockwise.
hese adjustments must be made while out of the chair.
2. ension Adjustment
he tilting tension is controlled by the circular knob under the
right side of the seat near the rear.
To increase the tension turn the knob counter clockwise.
To decrease the tension turn the knob clockwise.
he adjustment can be made while seated although some may
find it easier to stand in front of the chair.
Use this
(to increase or decrease
tension)
Use this
(to raise or lower
chair height – manual
adjustment

4. Height Adjustment
(Pneumatic adjustment)
he height of the chair is adjusted by the paddle located under
the right side of the seat near the front.
To raise the chair height lift your weight slightly out of the chair
while pulling the handle upwards.
To lower the chair remain seated and pull the paddle upwards.
Release the paddle when the desired height is reached whether
raising or lowering the chair.
Use this
(to raise or lower
chair height – pneumatic
adjustment)