keilhauer Junior User manual

Junior
1450 Birchmount Road, Toronto, Ontario, Canada M1P 2E3
tel [phone] fax [phone] 724 5665
www.keilhauer.com

Sit down. Please.
The only way to know
if you are adjusting
your chair to provide
you with maximum
comfort, is to make
these adjustments
while you are seated.

1. Seat Height Adjustment
Use this
(to raise or lower seat)
Use the paddle shaped lever on the right side underneath the seat.
To raise lift your weight off the seat while lifting the front of the lever.
To lower sit on the seat while lifting front of the lever.

3. Tilt Lock
Use the big round knob under the center of the seat
To increase tension turn the knob clockwise
To decrease tension turn the knob counter-clockwise
Use this
(to increase or decrease
tension)

3. Tilt Lock
Use this
(for forward lift)
Use the paddle shaped lever on the left side underneath the seat.
To unlock tilt pull the front of the lever up and tilt back slightly
To lock tilt recline to your desired position and push the front of
the lever down
Forward tilt using the small knob lever at the front right side
underneath the seat, push the knob in to “in” gage forward
tilt – pull the knob out to lock “out” forward tilt (the chair must be
reclined slightly each time to reset this feature)
Use this
(to lock or unlock backward
tilt)

4. Arm Height Adjustment
Use the buttons on the outside of the arm rests
To raise or lower resting your thumb and palm on top of the arm
rest, slide your middle fingers to the outside of the arms and
squeeze the button up – raise or lower the arm rest to the desired
position and release the button to lock
In and out grab the front of the arm rest and pull it back –
then pivot it in or out to one of the 3 positions (there are no
buttons to push)
Use this
(to raise or lower arms)
Use this area
(to pivot arms)

5. Back Height Adjustment
Use this
(to raise or lower back)
Use the sides of the back just above the seat and grab with
both hands
To raise lift the back up and towards you – you will hear a click for
each different height
To lower lift the back to the highest setting and it will disengage
allowing it to drop down to the starting (lowest) height; the
back must return to the starting position to reengage the height
adjustment mechanism

©COPYRIGHT KEILHAUER 2004