keilhauer Forsi Table User manual

Forsi Table
Assembly Instructions
Tool Required
5/32”” Hex Allen Key
Hardware Included
1/4-20 x 2”
Flat head cap screw
(x8)
#6-32 x 3/4”
Rounded head screw
(x8)
Install the table leg (x2) onto the table top and the steel
frame at the four mount locations. Using the 5/32” hex
key fasten with 1/4”-20 x 2” flat head cap screw (x8).
Place the table top upside down on a blanket.
3
1
1
Using the 5/32” hex key, fasten the steel frame with
1/4”-20 x 5/8” button head cap screw (x6).
2
Place assembled table in its final position.
5
Using the Phillips head screw driver, install the glide (x4)
using #6-32 x 3/4” rounded head screw (x8).
4
1/4-20 x 5/8”
Button head cap screw
(x6)
Glide
(x4)
Phillips head screw
driver
Installed
keilhauer.com

Forsi Power Table
Assembly Instructions
Hardware Included
#8-15 x 1/2”
Quad head wood screw
(x1)
Power Unit
(x1)
Using the Phillips head screw driver install the cable
clamp (x1) with the #8-15 X 1/2” quad head wood screw.
Install the power unit (x1) through the hole cut out of the
table top. See supplied power unit installation
instructions.
3
1
2
Remove the adhesive backing from the cable management
track (x1) and press onto the center inside table leg. Feed
the power cable into the cable management track.
2
Place the assembled table in it’s final position.
4
Tool Required
Phillips head screw
driver
Cable Clamp
(x1)
Cable Mangement
Track
(x1)
Underside of
table shown.
Underside of
table shown.
keilhauer.com