keilhauer Tom User manual

Tom
1450 Birchmount Road, Toronto, Ontario, Canada M1P 2E3
tel [phone] fax [phone] 724 5665
www.keilhauer.com [e-mail]
©COPYRIGHT KEILHAUER 2004

1. Seat Height Adjustment
Use this
(to raise or lower seat)
Use the paddle shaped lever on the right side underneath
the seat
To raise lift your weight off the seat while lifting the front
of the lever
Tolower sit on the seat while lifting the front of the lever
Sit down. Please.
The only way to know
if you are adjusting
your chair to provide
you with maximum
comfort, is to make
these adjustments
while you are seated.

2. Tilt
Use the big round knob underneath the center of the seat
Toincrease tension turnthe knob clockwise
Todecrease tension turn the knob counter-clockwise
Use this
(to increase or decrease
tension)
3. Tilt Lock
Use the paddle shaped lever on the left side underneath the seat
Tounlocktilt pull the front of the lever up and tilt back slightly
Tolocktilt recline to your desired position and push the front of
the lever down
Forward tilt using the small knob lever at the front right side
underneath the seat, push the knob in to “in” gage forward
tilt – pull the knob out tolock“out” forwardtilt (the chair back
must be reclined slightly each time to reset this feature)
Use this
(for forward tilt)
Use this (to lock or unlock
backward tilt)

4. Arm Height Adjustment
Use the buttons on the outside of the arm rests
Toraise or lower resting your thumb and palm on top of the arm
rest, slide your middle fingers to the outside of the arms and
squeeze the button up – raise or lower the arm rest to the
desired position and release the button to lock
In and out grab the front of the arm rest and pull it back
– then pivot it in or out to one of the 3 positions (there are no
buttons to push)
Use this (to raise or
lower arms)
Use this area
(to pivot arms)
5. Back Height Adjustment
Use the sides of the back just above the seat and grab
with both hands
To raise lift the back up and towards you – you will hear a click
for each different height
Tolower lift the back to the highest setting and it will disengage
allowing it to drop down to the starting (lowest) height;
the back must return to the starting position to reengage the
height adjustment mechanism
Use this area
(to raise or lower back)