keilhauer Symm Metal Table User manual

1/8” Hex Allen Key
5/32” Hex Allen Key
1/4-20 x 5/8”
Button head cap
screw (x4)
Button head cap
screw (x4)
1/4”
Flat washer
(x4)
Glide
(x4)
Using the 1/8” hex key, fasten the wood leg sub
assembly to the aluminum extrusion with the 1/4” set
screw (x16).
Using the 1/8” hex key, fasten the glide (x4) to the
metalleg using the 10-24 x 1/2” button head cap
screw (x4).
3
1
1
Using the 1/8” hex key, fasten the table mount to the
metal leg with the 10-24 flat head machine screw
(x12).
2
5
Place the table top upside down on a blanket.
4
Using the 5/32” hex key, fasten the base sub
assembly to the table top with with 1/4-20 x 5/8“
button headcap screw (x4) and flat washer (x4).
Proceed to flip the table and place into its final
position.
6
10-24 Flat head
machine screw
(x12)
10-24 x 1/2” 1/4” Set Screw
(x16)
Symm Metal Table
Assembly Instructions
Tools Required
Hardware Included

1/8” Hex Allen Key
5/32” Hex Allen Key
Robertson
Head
Screwdriver
Hammer
1/4-20 x 5/8”
Button head cap
screw (x4)
1/4”
Flat washer
(x4)
Glide
(x4)
Using the 1/8” hex key, fasten the wood leg sub assembly
to the aluminum extrusion with the 1/4” set screw (x16).
Using the hammer, install the glide (x4) in to the bottom
of the wood leg.
3
1
2
Using the Robertson head screwdriver, fasten the table
mount to the wood leg with the #10 x 2” (x4) and
#10 x 1 1/4” (x8) wood screws.
2
5
Place the table top upside down on a blanket.
4
Using the 5/32” hex key, fasten the base sub assembly to
the table top with with 1/4-20 x 5/8“ button headcap
screw (x4) and flat washer (x4).
Proceed to flip the table and place into its final position.
6
#10 x 2” Screw
(x4)(x4)
#10 x 1 1/4” Screw
(x8)
1/4” Set Screw
(x16)
Symm Wood Table
Assembly Instructions
Tools Required
Hardware Included