keilhauer Juxta Table with Power User manual

keilhauer.com
1450 Birchmount Road
Toronto, Ontario, Canada
M1P 2E3
T 416 759 5665
F 416 759 5723
1 800 724 5665
Juxta Table with Power
Assembly Guide

Tools Required Hardware Included
Peel back protective polyfoam on both column and base.
Line up the holes and assemble using the five 1/4-20 x 13/4" socket head cap
bolts and lock washers.
Assemble the mounting plate to the column. The corner of the plate must line up
with the leg.
Both ends of the column are the same.
Tighten bolts using a staggered procedure until all of the bolts are tight.
Use five 1/4-20 x 3/4" button socket cap bolts in a staggered procedure until all
of the bolts are tight.
keilhauer.com
(1) Pneumatic Driver Gun (1) Hex Bit(1) Robertson Bit (5) 1/4-20 x 3/4"
Button Socket
Cap Bolts
(6) 1/4-20 x 5/8"
Rod Bolts
1
3
5
2
4
6
(5) 1/4-20 x 13/4"
Socket Head
Cap Bolts

Assemble the base to the top. Using six 1/4-20 x 5/8" rod bolts, secure the
base to the top by tightening in a staggered procedure.
Before installing the power unit, read the factory directions in the power box for
proper assembly instructions.
(5) Lock Washers
for Socket Head
Cap Bolts
1
2
3
7 8
Insert the cord through the top of the table and feed through the column and out
through the bottom.
Move the table into place.
Carefully insert the power unit into the opening in the top of the table, and
press firmly.
910
11
Warning
Ensure mounting plate is aligned
with the table leg, as shown in
step 5.

Juxta Table with Power Designed by EOOS
keilhauer.com
1450 Birchmount Road
Toronto, Ontario, Canada
M1P 2E3
T 416 759 5665
F 416 759 5723
1 800 724 5665
Power Options
Option 1
Two electrical outlets rated
15A/125VAC.
Option 2
One electrical outlet rated
15A/125VAC and two USB-A
connections for USB powered
devices.