Keys Fitness KF-PC User manual

Power Cage
Owner’s Manual
Read all precautions and
instructions in this manual before
using this equipment.
KF-PC
215-00100
10/06 Rev A

2
Important Safety Information 3
Before You Start 4
Assembly 5-8
Parts List 9
Exploded View 10
Warranty Information 11
Table of Contents

3
Prior to assembly, remove components from the box and verify that all the listed parts
were supplied.
Before using this unit or starting any exercise program, consult your physician.
This is especially important for persons over the age of 35 and/or persons with pre-
existing health problems. Keys Fitness Products LP assumes no responsibility for
personal injury or property damage sustained by or through the use of this product.
It is the owner’s responsibility to ensure that all users of this unit have read the
Owner’s Manual and are familiar with safety information and precautions.
SAFETY INFORMATION WARNING!
SAFETY PRECAUTIONS
• This unit should only be used on a level surface and is intended for indoor use
only. Keys Fitness recommends an equipment mat be placed under the unit to
protect the floor or carpet and for easier cleaning.
• Wear comfortable, good-quality walking or running shoes and appropriate cloth-
ing. Do not use this unit with bare feet, sandals, socks or stockings!
• Always examine your unit before using to ensure all parts are in working order.
• Do not leave children unsupervised near or on the unit.
• Service to your unit should only be performed by an authorized service represen-
tative, unless authorized and/or instructed by a Keys Fitness technician. Failure
to follow these instructions will void the warranty.
Important Safety Information
NOTE: Hand tighten bolts and nylon nuts until machine is fully
assembled.

4
THANK YOU for making this unit a part of your exercise program.
Keys Fitness assures the very best in value, appearance, durability
and biomechanics.
This manual will guide you through the assembly process. If at
any time you are having trouble with the assembly or use of this product, then
please contact us at our Keys Fitness Helpline. We have trained service techni-
cians on site to take care of you, our valued customer.
KEYS FITNESS SERIES
MODEL: KF-PC
QUESTIONS?
CALL
1-800-683-1236
Monday-Friday
8:30-5:30 Central Time
When calling please have the following product information available:
REGISTRATION CARD
To avoid unnecessary delays in warranty parts and to insure that a permanent
record of your purchase is on file with our company, be sure to send in the war-
ranty registration card or register on-line at www.keysfitness.com within 10 days
of purchase.
Before You Start

Assembly
5

STEP 1
Attach Rubber Pads (15) to underside of Base Frame (10).
Attach Uprights (1,2,3,4) to Base Frame (10) using:
8 x (21) Bolt M12x75
16 x (24) Washer M12
8 x (23) Nylon Lock Nut M12
Note: Numbers on Uprights should face inward toward center
of unit.
6
NOTE: Hand tighten bolts and nylon nuts until machine is fully assembled.
Assembly

STEP 2
Assemble Slide Holders (6,7,8,9) onto uprights as shown
above. Do not move on to STEP 3 before the Slide Holders
are attached correctly.
7
NOTE: Hand tighten bolts and nylon nuts until machine is fully assembled.
Assembly

Connect Top Frame to Uprights using:
2 x (12) Steel Plate
4 x (20) Bolt M12x100
4 x (21) Bolt M12x75
2 x (22) Bolt M12x95
20 x (24) Washer M12
10 x (23) Nylon Lock Nut M12
STEP 3
8
NOTE: Hand tighten bolts and nylon nuts until machine is fully assembled.
Assembly

9
KF-PC Parts List Rev B
Ref # Part # description Qty
1 223-00902 LEFT FRONT UPRIGHT, KF-PC 1
2 223-00903 RIGHT FRONT UPRIGHT, KF-PC 1
3 223-00904 RIGHT REAR UPRIGHT, KF-PC 1
4 223-00905 LEFT REAR UPRIGHT, KF-PC 1
5 223-00906 TOP FRAME, KF-PC 1
6 223-00907 REAR WEIGHT SLIDE HOLDER, KF-PC 2
7 223-00908 FRONT WEIGHT SLIDE HOLDER, KF-PC 2
8 223-00909 LEFT SLIDE CROSS WEIGHT HOLDER, KF-PC 1
9 223-00910 RIGHT SLIDE CROSS WEIGHT HOLDER, KF-PC 1
10 223-00911 BASE FRAME, KF-PC 1
11 219-00181 DIP BAR KPS-PC 2
12 219-00586 STEEL PLATE, KF-PC 2
13 210-00258 POP PIN (LOCKING), KF-PC 8
14 206-00327 PLASTIC SLEEVE, 63.5X88.9-50.8X76.2 16
15 206-00129 RUBBER PAD KPS-PC#15 4
16 206-00394 PLUG, 50.8X76.2 KF SERIES 2
17 206-00391 SQUARE PLUG, 50.8 KF SERIES 3
18 206-00389 HAND GRIP, KF-45/KF-AAB 2
19 219-00073 CLIP KPS-PC 2
20 202-00654 SCREW, BUTTON HEAD SOCKET CAP M12X100 4
21 202-00655 SCREW, BUTTON HEAD SOCKET CAP M12X75 12
22 202-00656 SCREW, BUTTON HEAD SOCKET CAP M12X95 2
23 202-00092 NYLON NUT, M12 18
24 202-00127 WASHER, 13*24*1.5 36
Parts List

10
Exploded View